TOPEAK B085H8Y9CN M Iphone 13 Series Ridecase with Mount Instruction Manual
- June 5, 2024
- TOPEAK
Table of Contents
- TOPEAK B085H8Y9CN M Iphone 13 Series Ridecase with Mount
- RIDE CASE
- RIDE CASE MOUNT
- Tools Required
- USE AS A REGULAR IPHONE CASE
- INSTALL RIDE CASE MOUNT ON STEM CAP
- INSTALL RIDE CASE MOUNT ON HANDLEBAR OR STEM
- OPTIONAL ACCESSORIES
- REMOVE IPHONE WITH RIDECASE FROM RIDE CASE MOUNT
- ROTATION ADJUSTABLE
- WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TOPEAK B085H8Y9CN M Iphone 13 Series Ridecase with Mount
RIDE CASE
-
Remove ride case for wireless charging.
-
Stem Cap Mount For 1-1/8 Stem Can
-
Handlebar Mount
RIDE CASE MOUNT
- 1-1/8″ Stem Cap Mount is recommended for use with 1-1/8″ steel or alloy fork steer tubes only.
- 1, 1-1/4″ 1.5″ or Carbon steer tubes should use included Handlebar Mount.
WARNING
The built-in RideCase flip stand allows convenient viewing of your iPhone on any flat surface. However, do not place a load or press down on RideCase, or try to over-extend the flip stand past its limit as this will cause it to break.
Important Note
- Due to the precise tolerance fit of RideCase with iPhone, previously damaged phones that prevent a secure fit with RideCase should not be used or further damage will occur. Any protective film on the back and sides of phones must be removed before installing RideCase.
- Carefully inspect Ride Case for damage or cracks that may occur over time or rough handling.
- If any damage is found to RideCase, discontinue use immediately or your iPhone may be damaged by inadvertent release from RideCase while riding.
- Make sure to remove the iPhone from RideCase Mount before adjusting mount angle.
Tools Required
- 4mm/ 5mm Allen key
USE AS A REGULAR IPHONE CASE
Install iPhone on case
- Insert lower portion of iPhone in RideCase. Use thumbs to snap top of iPhone into RideCase and listen for an audible click. Check that the metal corners of iPhone are installed under the plastic RideCase trame.
- Remove iPhone from case
INSTALL RIDE CASE MOUNT ON STEM CAP
- Remove the stem cap and replace it with the RiceCase Mount.
NOTE: Make sure to remove the iPhone from the RideCase mount before adjusting the mounting angle.
INSTALL RIDE CASE MOUNT ON HANDLEBAR OR STEM
NOTE: Do not install Ride Casement on the tapered section of the handlebar to prevent unintended loosening of the mount and causing possible damage to your iPhone.
OPTIONAL ACCESSORIES
INSTALL IPHONE WITH RIDECASE ONTO RIDE CASE MOUNT
To prevent potential damage to your phone, install iPhone/RideCase assembly on RideCase Mount until an audible click is heard. Slide iPhone/RideCase assembly back and forth to insure that it is fixed firmly on the RideCase Mount.
REMOVE IPHONE WITH RIDECASE FROM RIDE CASE MOUNT
- Press the Release Button to remove iPhone with RideCase from RideCase Mount.
ROTATION ADJUSTABLE
WARRANTY
- 2-year Warranty against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must be the original owner and provide proof of purchase. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture, All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this manual. The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions. For USA customer service, call: 1-800-250-3068