TOPEAK RIDECASE Mount HB User Guide
- June 4, 2024
- TOPEAK
Table of Contents
RIDE CASE MOUNT HB
(for handlebars)
PREPARE TO RIDE
Fits 022.2-031.8mm
HANDLEBAR
For 4.5″-6.5″
smartphone
Included parts
4 Assembly options
Four different
mounting configurations are possible.
Insert bolt in deeper socket hole as shown
INSTALL RIDE CASE MOUNT HB
DO NOT install RIDECASE MOUNT HB at a bend or bar transition area.
Assemble the 2mm spacer when installing on 022.2 handlebar Bei Lenkern mit o22,2mm den 2mm Spacer montieren
DO NOT remove the spacer completely, otherwise, it may damage the handlebar.
Rotate the mount for better access to the adjustment bolt
INSTALL OMNI RIDE
CASE
Pull the OMNI RIDECASE band to wrap the smartphone edges.
INSTALL / REMOVE OMNI RIDE CASE
Press the release
button to remove the smartphone from RideCase Mount
ROTATION ADJUSTMENT
WARNING
- After installing Omni RideCase onto RideCase Mount HB, check that it is firmly fixed on the mount.
- Periodically check all bolts and tighten as needed.
WARRANTY
2-year Warranty: All mechanical components against manufacturer defects only. Warranty Claim Requirements To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this manual.
- The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions. For USA customer service call: 1-800-250-3068 / www.topeak.com