CYP PU-1201-KIT UHD+ HDMI Over Category Cable Transmitter and Receiver Set User Manual
- June 15, 2024
- CYP
Table of Contents
CYP PU-1201-KIT UHD+ HDMI Over Category Cable Transmitter and Receiver
Set
Product Information
Specifications
- Product Name: PU-1201-KIT
- Type: UHD+ HDMI over Category Cable Transmitter & Receiver Set
- Version: 1.1
- HDMI Compatibility: HDMI 2.0 and DVI 1.0 HDCP Compliance: HDCP 2.2 and HDCP 1.x
- Input Resolution Support: Up to 4K@60Hz (4:4:4, 8-bit) Extension Range: Up to 60m (197ft)
- EDID Management: Basic EDID management with 3 built-in EDIDs and an EDID bypass option
- Audio Support: LPCM (up to 8 channels) and standard Bitstream
- Analogue Audio Extraction: Supports stereo analogue audio extraction (LPCM 2.0 sources only)
- LED Indicators: Top panel LEDs indicate source selection, link state, and power
- PoC (Power over Cable): RX Unit is a PoC (PD) device and is powered by the connected HDMI receiving equipment
Product Usage Instructions
Introduction
The PU-1201-KIT is a UHD+ HDMI over Category Cable Transmitter & Receiver Set
designed for long-distance video and audio extension. It is suitable for
various applications including hotel or convention center displays, lecture
halls, auditoriums,
classroom setups, houses of worship, conference rooms, and boardrooms.
Applications
The PU-1201-KIT can be used for:
- Long distance video and audio extension
- Hotel or convention center displays
- Lecture halls, auditoriums, and classrooms
- Houses of worship
- Conference rooms and boardrooms
Package Contents
The package includes the following items:
- PU-1201-KIT Transmitter Unit
- PU-1201-KIT Receiver Unit
- Power Supply Unit (for Receiver Unit)
- User Manual
System Requirements
In order to use the PU-1201-KIT, you will need the following:
- HDMI receiving equipment such as an HDTV, monitor, or audio amplifier
- Premium High Speed HDMI cables
- Industry standard Cat.6, Cat.6A, or Cat.7 cables
Features
The PU-1201-KIT offers the following features:
- HDMI 2.0 and DVI 1.0 compatibility
- HDCP 2.2 and HDCP 1.x compliance
- Transmitter (TX): 1 HDMI input, 1 Cat.6 output, 1 HDMI bypass output
- Receiver (RX): 1 Cat.6 input, 1 HDMI input, 1 HDMI output Supports HDMI input and Cat.6 output resolutions up to 4K@60Hz (4:4:4, 8-bit) Cat.6 extension can reach up to 60m (197ft)
- Basic EDID management with 3 built-in EDIDs and an EDID bypass option
- Supports extension of many audio formats including LPCM (up to 8 channels) and standard Bitstream
- Supports stereo analogue audio extraction (LPCM 2.0 sources only)
- Top panel LEDs indicate source selection, link state, and power
- RX Unit is a PoC (PD) device and is powered by the connected HDMI receiving equipment
FAQ
Q: What is the maximum extension range of the PU-1201-KIT?
A: The PU-1201-KIT can extend HDMI signals over Cat.6 cables up to 60 meters (197 feet).
Q: Can I use any type of HDMI cable with the PU-1201-KIT?
A: It is highly recommended to use Premium High Speed HDMI cables for optimal performance.
Q: How many EDIDs are available in the PU-1201-KIT?
A: The PU-1201-KIT has 3 built-in EDIDs and an EDID bypass option for basic EDID management.
INTRODUCTION
This UHD+ HDMI over Category Cable Transmitter & Receiver set is an
extension system which is able to extend high quality 4K HDMI video along with
audio up to 60m (197ft) of standard Cat.6 network cable
without signal loss or introducing delay. This receiver unit includes a
selectable HDMI input, stereo analogue audio extraction, and is
powered directly via PoC (Power over Cable) provided by the connected
compatible transmitter unit which includes basic EDID management
functionality, an HDMI bypass output, and provides PoC (Power over Cable) to
the connected compatible receiver.
APPLICATIONS
- Long distance video and audio extension
- Hotel or convention center displays
- Lecture halls, auditoriums and classroom
- Houses of worship
- Conference rooms and boardrooms
PACKAGE CONTENTS
- 1× UHD+ HDMI over Category Cable Transmitter
- 1× UHD+ HDMI over Category Cable Receiver
- 1× 12V/3A DC Power Adapter
- 1× Operation Manual
SYSTEM REQUIREMENTS
- HDMI receiving equipment such as an HDTV, monitor, or audio amplifier.
- The use of Premium High Speed HDMI cables, and industry standard Cat.6, Cat.6A or Cat.7, is highly recommended.
FEATURES
- HDMI 2.0 and DVI 1.0 compatible
- HDCP 2.2 and HDCP 1.x compliant
- RX: 1 Cat.6 input, 1 HDMI input, 1 HDMI output
- TX: 1 HDMI input, 1 Cat.6 output, 1 HDMI bypass output
- Supports HDMI input and Cat.6 output resolutions up to 4K@60Hz (4:4:4, 8-bit)
- Cat.6 extension can reach to up to 60m (197ft)
- Basic EDID management with 3 built in EDIDs and an EDID bypass option Supports extension of many audio formats including LPCM (up to 8 channels) and standard Bitstream Supports stereo analogue audio extraction (LPCM 2.0 sources only) Top panel
- LEDs indicate source selection, link state, and power
- RX Unit is a PoC (PD) device and is powered by the connected compatible PoC (PSE) transmitter
- TX Unit is a PoC (PSE) device and can provide power to a connected compatible receiver
OPERATION CONTROLS AND FUNCTIONS
TX Front Panel
SERVICE Port: This port is reserved for firmware update use only.
2 HDMI IN Port: Connect to HDMI source equipment such as a media player,
game console, or set-top box. DVI sources are supported with the use of an
HDMI to DVI adapter.
EDID Dial: Use this dial to select the unit’s EDID management mode:
1 = Sink EDID
2 = FHD (1080p60) & LPCM 2.0
3 = UHD (4K30) & LPCM 2.0 4 = UHD+ (4K60) & LPCM 2.0
RX Front Panel
SERVICE Port:
This port is reserved for firmware update use only.
HDMI IN Port:
Connect to HDMI source equipment such as a media
player, game console, or set-top box. DVI sources are supported with the use
of an HDMI to DVI adapter.
IN SEL Button: Press this button to toggle between the two available inputs.
TX Rear Panel
CAT6 OUT Port:
Connect to a compatible receiver with a single Cat.6, or better, cable for transmission of all data signals. PoC will also be supplied to a connected compatible PD receiver.
Note:
The PoC function is designed to send power to compatible receiver units only. Other brands of receiver may not be compatible.
HDMI OUT Port: Connect to HDMI TVs, monitors, or amplifiers for digital video and audio output.
DC 12V Port: Plug the 12V DC power adapter into this port and connect it to an AC wall outlet for power. The top LED will illuminate red to indicate the unit is on and receiving power.
RX Rear Panel
CAT6 IN Port: Connect to a compatible Cat.6 transmitter with a single Cat.6, or better, cable for reception of all data signals. Power via PoC is also supplied to this unit by the connected compatible PSE transmitter.
Note: The PoC function is designed to receiver power from compatible transmitter units only. Other brands of transmitter may not be compatible.
HDMI OUT Port: Connect to HDMI TVs, monitors, or amplifiers for digital video and audio output.
EXTRACT Port: Connect to powered speakers, headphones, or an amplifier for analogue stereo audio output.
Note: Only LPCM 2.0 audio sources are supported. Other audio formats will be automatically muted
TX Top Panel
Power LED:
This LED will illuminate red to indicate the unit is on and receiving power. When the unit is in update mode the LED will blink.
Link LED:
This LED will illuminate blue to indicate that a live source has been detected on the input port. When no source is detected the LED will remain off
RX Top Panel
Power LED:
This LED will illuminate red to indicate the unit is on and
receiving power. When the unit is in update mode the LED will blink.
Link LED :
This LED will illuminate blue to indicate that a live source has been detected on the currently selected input port. When no source is detected the LED will remain off.
HDMI & CAT LEDs: The illuminated LED indicates which source is currently selected.
CONNECTION DIAGRAM
SPECIFICATIONS
Technical Specifications
- HDMI Bandwidth: 18Gbps
- Cat.6 Bandwidth: 10Gbps
- Input Ports (TX): 1×HDMI (Type-A)
- Input Ports (RX): 1×Cat.6 (RJ-45)
- 1×HDMI (Type-A)
- Output Ports (TX): 1×HDMI (Type-A)
- 1×Analogue Stereo (3.5mm)
- Output Ports (RX): 1×Cat.6 (RJ-45)
- 1×HDMI (Type-A)
- Service Port: 1×USB 2.0 (Micro-B)
- Power Supply (TX): 12V/3A DC
- (US/EU standards, CE/FCC/UL certified)
- Power Supply (RX): PoC from Transmitter
- ESD Protection (HBM): ±8kV (Air Discharge)
- ±4kV (Contact Discharge)
- Dimensions (W×H×D): 85mm×26mm×85mm [Case Only]
- 85mm×26mm×91mm [All Inclusive]
- Weight: 150g
- Chassis Material: Plastic
- Chassis Colour: Black
- Operating Temperature: 0˚C – 40˚C/32˚F – 104˚F
- Storage Temperature :-20˚C – 60˚C/-4˚F – 140˚F
- Relative Humidity: 20 – 90% RH (Non-condensing)
- Power Consumption : 4.6W (including PoC to receiver)
Video Specifications
Audio Specifications
Digital Audio
Analogue Audio
Cable Specifications
Bandwidth Category Examples:
HD Video
- FHD Video
- 1080p@60Hz
- HDMI transmission rates between 3Gbps and 5.3Gbps
- 3G-SDI (SMPTE 424M, 2.970Gbps)
4K UHD Video
- 4K@24/25/30Hz (8-bit color) & 4K@50/60Hz (4:2:0, 8-bit color)
- HDMI transmission rates between 5.3Gbps and 10.2Gbps
- 6G-SDI (SMPTE ST 2081, 6Gbps)
4K UHD+ Video
- 1080p@120Hz (10/12-bit HDR)
- 4K@50/60Hz (4:4:4, 8-bit) & 4K@50/60Hz (4:2:0, 10/12-bit HDR)
- HDMI transmission rates between 10.2Gbps and 18Gbps
- 12G-SDI (SMPTE ST 2082, 12Gbps)
8K UHD Video
- 4K@120Hz (10/12-bit HDR)
- 8K@24/25/30Hz (10/12-bit HDR) & 8K@50/60Hz (4:2:0, 8-bit color)
- HDMI transmission rates between 18Gbps and 48Gbps
- 24G-SDI (SMPTE ST 2083, 24Gbps)
ACRONYMS
- CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA
- Tel: +44 (0) 20 3137 9180
- Fax: +44 (0) 20 3137 6279
- Email: sales@cypeurope.com
- www.cypeurope.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>