LG 43QNED75URA LED TV Owner’s Manual

: June 16, 2024
: LG

LG 43QNED75URA LED TV

LG-43QNED75URA-LED-TV-PRODUCT

Product Information

LED TV

Specifications

Type: LED TV
Screen Type: LCD with LED backlights
Model Number: [Model Number]
Serial Number: [Serial Number]
Manufacturer: LG Electronics
Country of Origin: Korea
Important Safety Instructions
Before operating your LED TV, please read and follow these safety instructions:

Electrical Safety

If the power cord or plug is damaged, do not use the TV.
Contact qualified service personnel.
Do not open the TV as it contains no user-serviceable parts.
Refer to qualified service personnel for any repairs.
To reduce the risk of electric shock, do not expose the TV to rain or moisture.

Placement and Environment

Keep the TV away from direct sunlight and high-humidity areas such as bathrooms.
Avoid placing the TV near heat sources like stoves or other devices that produce heat.
Do not expose the TV to dripping or splashing liquids and avoid placing objects filled with liquids on or over the TV.
Do not install the TV in excessively dusty places.
Avoid placing the TV near flammable objects such as gasoline or candles, and do not expose it to direct air conditioning.

Grounding and Antenna System

Ensure that the antenna system is properly grounded to protect against voltage surges and static charges.

Product Usage Instructions

Initial Setup

Connect the power cord to a power outlet and the TV.
Connect the antenna or cable to the appropriate port on the TV.
Turn on the TV using the power button on the remote control or the TV itself.
Follow the on-screen instructions to complete the initial setup, including language selection, channel scan, and network setup if applicable.

Remote Control

Use the remote control to navigate the TV’s menu and settings.
Refer to the user manual for detailed instructions on using the remote control.

Adjusting Picture and Sound

Use the picture settings menu to adjust brightness, contrast, color, and other picture settings to your preference.
Use the sound settings menu to adjust volume, equalizer settings, and other sound-related options.

Input Sources

Connect external devices such as gaming consoles, Blu-ray players, or sound systems to the TV using HDMI or other appropriate ports.
Use the input source button on the remote control to switch between different input sources.

Using Smart Features (if applicable)

If your LED TV has smart features, connect it to your home Wi-Fi network and follow the on-screen instructions to access apps, streaming services, and other online content.
Refer to the user manual for detailed instructions on using the smart features of your LED TV.

Frequently Asked Questions (FAQ)

Q1: How do I register my product?

A: To register your LED TV, visit www.lg.com and follow the instructions on the website.

Q2: Where can I find the user guide?

A: To access the user guide, press the [ ] button on your remote control, navigate to the [Support] menu, and select [User Guide].

Q3: How can I contact LG customer support?

A: For inquiries or comments, visit www.lg.com or call one of the following numbers:
USA: 1-888-542-2623 (Consumer User) / 1-800-243-0000 (Commercial User)
Canada: 1-888-865-3026

Important Safety Instruction

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install under the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) are available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration (Canada).

Before reading this manual

Read this manual thoroughly before operating your TV, and keep it for future reference.
On the website, you can download the manual including installation, use, troubleshooting, specifications, license, etc and view its contents on your PC or mobile device.
User Guide: For more information about this TV, read the USER GUIDE embedded in the product. (Depending upon model)
To open the USER GUIDE → [ ] → [Support] → [User Guide]

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices work only with certain models.
The model name or design may be changed due to the manufacturer’s circumstances or policies.

Magic Remote Control:

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.
A cable to connect antennas and external devices must be purchased separately.

Note

Product specifications or contents of this manual may be changed without prior notice due to the upgrade of product functions.
The items supplied with your product may vary depending on the model.
The image shown may differ from your TV.

Warning! Safety instructions

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the device.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

Do not place the TV and/or remote control in the following environments:

Keep the product away from direct sunlight.
An area with high humidity such as a bathroom.
Near any heat source such as stoves and other devices that produce heat.
Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.
An area exposed to rain or wind.
Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction, or product deformation.

Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.
Do not install the product on a carpet or cushion.
Do not block or cover the product with cloth or other materials while the unit is plugged in.
Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
Do not move the TV whilst the Power cord is plugged in.
Do not use a damaged or loosely fitting power cord.
Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.
Disconnecting the Device from the Main Power
The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
Do not let your children climb or cling to the TV. Otherwise, the TV may fall over, which may cause serious injury.

Outdoor Antenna Grounding (Can differ by country):

If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.
Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases, a fire may break out.
Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service.
Do not touch the end of the power cord while it is plugged in. You may be electrocuted.
If any of the following occur, unplug the product immediately and contact your local customer service.
The product has been damaged.
If water or another substance enters the product (like an AC adapter, power cord, or TV).
If you smell smoke or other odors coming from the TV
When lightning storms or when unused for long periods. Even if the TV is turned off by a remote control or button, the AC power source is connected to the unit if not unplugged in.
Do not use high-voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.
Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur.
Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.
Use only authorized attachments/accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.
To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe the dust off.

Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.
Do not short-circuit, disassemble, or allow the batteries to overheat.
Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

Moving

When moving, make sure the product is turned off, and unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs.
Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard, or injury.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
Do not allow an impact shock, or any objects to fall into the product, and do not drop anything onto the screen.
Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to the screen.

Cleaning

When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV.
Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel.
Otherwise, this may result in electric shock or product damage.

Installation

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
It is recommended to move the TV to the box or packing material that the TV originally came in.
Before moving or lifting the TV, disconnect the power cord and all cables.
When holding the TV, the screen should face away from you to avoid damage.
Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.
Use at least two people to move a large TV.
When transporting the TV, do not expose the TV to jolts or excessive vibration.
When transporting the TV, keep the TV upright; never turn the TV on its side or tilt it towards the left or right.
When handling the TV, be careful not to damage the protruding buttons.
Avoid touching the screen at all times, as this may result in damage to the screen.
Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

Lift and tilt the TV into its upright position on a table.
- Leave a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.
Connect the power cord to a wall outlet.

Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
Do not use any unapproved items to ensure the safety and lifespan of the product.
Any damages or injuries by using unapproved items are not covered by the warranty.
If you install the TV on a stand, you need to take action to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
When assembling the stand, ensure that all of the provided screws are attached. If the screws are not fully tightened, the product may tilt or tip over, resulting in damage.
Tightening the screws with excessive force may cause them to come off due to abrasion of the screw joint.
Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
For more information on screws and wall mount brackets, refer to the Separate Purchase.
If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product. When you install the set use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, to prevent the influx of dust and insects, (Depending on model).

Securing TV to the Wall

Insert and tighten the eyeballs or TV brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove the bolts first.
Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyeballs on the rear of the TV.
Connect the eyeballs and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

Use a platform or cabinet that is strong and large enough to support the TV securely.
Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount.
We recommend that you use an LG brand wall mount.
The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following.
The illustrations may differ from the actual items and an RF cable is optional.
Make sure not to bend the copper wire of the RF cable.
Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
Use a signal splitter to use 2 TVs or more.
DTV Audio Supported Codec: MPEG, Dolby Digital
This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed (Depending upon the country).

Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Power On (Press)
Power Off1) (Press and Hold)
Menu Control (Press2))
Menu Selection (Press and Hold3))

All running apps will close.
You can access and adjust the menu by pressing the button when the TV is on.
You can use the function when you access the menu control.

Connections

You can connect various external devices to the TV. For more information on external device connection, refer to the manual provided with each device.

HDMI

When connecting the HDMI cable, the product and external devices should be turned off and unplugged.
Supported HDMI Audio format (Depending upon model): True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz),
DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),
DTS-HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz)

Note

If the device connected to the Input Port also supports HDMI Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Color] setting to off (Depending upon the model). → [ ] → [General] → [External Devices] → [HDMI Settings] → [HDMI Deep Color] (Depending upon model).
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
Recommended HDMI cable types (3 m (9.84 feet) or less)
Ultra High-Speed HDMI®/™ cable

USB

Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. (Depending upon model)

Note

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) wide. (Depending upon model)
Use an extension cable that supports if the USB cable or USB flash drive does not fit into your TV’s USB port.

IR Blaster

Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player, soundbar, game consoles, etc., using the IR Blaster (Depending upon country) (Depending upon model).

Note

Connect the IR Blaster cable to the TV’s IR Blaster port.
Use universal control settings to control the device.
Secure the IR Blaster with the 3M tape provided.
To control external devices through “Room to Room Share” and “Hands-free Voice Control”, an IR blaster connection is required.

External Devices

Supported external devices are Blu-ray players, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, gaming devices, and other external devices.
For more information on external device connection, refer to the manual provided with each device.

Note

The external device connections shown may differ slightly from illustrations in a manual.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness.
If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the [Picture] menu until the picture is clear.
Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
When connecting to a wired LAN, use a CAT 7 cable with high-speed Internet transmission. (Only when the port is provided.)
The TV may be capable of operating without a set-top box from a multichannel video programming distributor (MVPD).

Remote RS-232C setup

To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the manual, (Depending on the model).
Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage to the product.

Specifications

Product specifications may be changed without prior notice due to the upgrade of product functions.
The estimated yearly energy consumption indicated on the FTC label is measured under the Test Procedures for Television Sets (USA only).
The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
For information on the power supply and power consumption, refer to the label attached to the product.
The typical power consumption is measured under IEC 62087 or each country’s energy regulations.
On some models, the label is inside the external device connection terminal cover.
Depending upon the model or country, the typical power consumption may not be on the label.
Power requirement AC 120 V~ 50/60 Hz

(Depending upon country)

(Only QNED75ARA, QNED80ARA, QNED85ARA)

Broadcasting Specifications

Television system| ATSC, ATSC3.0 (Only USA), NTSC-M, 64 & 256 QAM
Channel coverage (Band)| VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135
External antenna impedance| 75 Ω

(Except for QNED75ARA, QNED80ARA, QNED85ARA)

Broadcasting Specifications

Television system| ATSC, NTSC-M, 64 & 256 QAM
Channel coverage (Band)| VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135
External antenna impedance| 75 Ω

Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards.
Upscaled and enhanced 8K images will vary depending on the source content (Depending upon the model).

Environment Condition

Conditions for Wall Mount Installation

Tilt Angle 0° – 15°
This specification range applies to TV wall mounts when adjusting for proper viewing angles.

Product Information

LG-43QNED75URA-LED-TV-FIG-5

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC95 / IC: 2703H-LGSBWAC95
This product contains a Type Approved Module by Jamaica: SMA – LGSBWAC95
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC22 / IC: 2703H-LGSBWAC22
This product contains a Type Approved Module by Jamaica: SMA – LGSBWAC22
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC97 / IC: 2703H-LGSBWAC97
This product contains a Type Approved Module by Jamaica: SMA – LGSBWAC97
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC23 / IC: 2703H-LGSBWAC23
This product contains a Type Approved Module by Jamaica: SMA – LGSBWAC23

Open Source Software Notice Information

To obtain the source code that is contained in this product, under GPL, LGPL,
MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices, and other relevant documents please visit https://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for three years after our last shipment of this product.

Licenses

LG-43QNED75URA-LED-TV-FIG-7

Troubleshooting

In TV / HDMI input, press the button on the remote control three times to display the model name and serial number on the screen.

Cannot control the TV with the remote control.| • Check if anything such as tape has been placed over the receiver.

• Check if there is any obstacle between the product and the remote control.

• Replace the batteries with new fresh ones.

---|---
No image display and no sound is produced.| • Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem with the wall outlet by connecting other products.

The TV turns off suddenly.| • Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated on the settings-related time.

• The auto-off function may have worked. This product is equipped with an auto-off function that automatically turns off the power if the remote control is not used for 15 minutes without an input signal.

Abnormal Display| • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with the product.

• This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly colored dots (red, blue, or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• You may find different brightness and color of the panel depending upon your viewing position(left/right/ top/down). This phenomenon occurs due to the characteristics of the panel. It is not related to the product performance, and it is not malfunctioning.

• Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

• Displaying a still image for a prolonged period may cause an image to stick. Avoid displaying a fixed image on the TV screen for an extended length of time.

Generated Sound| • Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel, (Depending upon model).
Make sure to wring any excess water or cleaner from the cloth.
Do not spray water or cleaner directly onto the TV screen.
Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Regulatory

FCC NOTICE

(For USA)

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference and
this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications in the construction of this device that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user’s authority to use the product.

FCC RF Radiation Exposure Statement (For USA)

(For having a wireless function (WLAN, Bluetooth,…)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions to satisfy RF exposure compliance.

Industry Canada Statement (For Canada)
(For having a wireless function (WLAN, Bluetooth,…)
This device contains license-exempt transmitters)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement (For Canada)

(For having a wireless function (WLAN, Bluetooth,…)
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

RSS-247 Requirement (For Canada)
(For products having the wireless function using 5 GHz frequency bands)

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MAz shall be such that the equipment still complies with the e.i.r.p. limit;
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and
(For devices operating in the band 5250-5350 MHz having an e.i.r.p. greater than 200 mW) Antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement outlined in section 6.2.2.3 of RSS-247 shall be indicated Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

NOTE TO CABLE/TV INSTALLER (For USA and Canada)
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.).
The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

Symbols

LG-43QNED75URA-LED-TV-FIG-8

EXTERNAL CONTROL DEVICE SETUP

Please read this manual carefully before operating the set and retain it for future reference.

KEY CODES

This feature is not available for all models.

Code (Hexa)| Function| Note| Code (Hexa)| Function| Note
---|---|---|---|---|---
00| CH +, PR +| R/C Button| 53| List| R/C Button
01| CH -, PR –| R/C Button| 5B| Exit| R/C Button
02| Volume +| R/C Button| 60| PIP(AD)| R/C Button
03| Volume –| R/C Button| 61| Blue| R/C Button
06| > (Arrow Key / Right Key)| R/C Button| 63| Yellow| R/C Button
07| < (Arrow Key / Left Key)| R/C Button| 71| Green| R/C Button
08| Power| R/C Button| 72| Red| R/C Button
09| Mute| R/C Button| 79| Ratio / Aspect Ratio| R/C Button
0B| Input| R/C Button| 91| AD (Audio Description)| R/C Button
0E| SLEEP| R/C Button| 9E| LIVE MENU| R/C Button
0F| TV, TV/RAD| R/C Button| 7A| User Guide| R/C Button
10 – 19| Number Key 0 – 9| R/C Button| 7C| Smart / Home| R/C Button
1A| Q.View / Flashback| R/C Button| 7E| SIMPLINK| R/C Button
1E| FAV (Favorite Channel)| R/C Button| 8E| ►► (Forward)| R/C Button
20| Text (Teletext)| R/C Button| 8F| ◄◄ (Rewind)| R/C Button
21| T. Opt (Teletext Option)| R/C Button| AA| Info| R/C Button
28| Return (BACK)| R/C Button| AB| Program Guide| R/C Button
30| AV (Audio / Video) Mode| R/C Button| B0| ► (Play)| R/C Button
39| Caption/Subtitle| R/C Button| B1| (Stop / File List)| R/C Button
40| Λ (Arrow Key / Cursor Up)| R/C Button| B5| RECENT| R/C Button
41| V (Arrow Key / Cursor Down)| R/C Button| BA| (Freeze / Slow Play / Pause)| R/C Button
42| My Apps| R/C Button| BB| Soccer| R/C Button
43| Menu / Settings| R/C Button| BD| ● (REC)| R/C Button
44| OK / Enter| R/C Button| DC| 3D| R/C Button
45| Q.Menu| R/C Button| 99| AutoConfig| R/C Button
4C| List, –| R/C Button| 9F| App / | R/C Button
4D| PICTURE| R/C Button| 9B| TV / PC| R/C Button
52| SOUND| R/C Button|

Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channels.
(For South Korea, Japan, North America, and Latin America except Colombia models)

EXTERNAL CONTROL DEVICE SETUP

The image shown may differ from your TV.
Connect the USB to Serial(RS-232C) converter/RS-232C(Serial) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
Please be advised that not all models support this type of connectivity.
Cable is not provided.

USB to Serial(RS-232C) converter with USB Cable

USB Type

LGTV supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial(RS-232C) converter which is not made nor provided by LG.
It can be purchased from computer stores that carry accessories for IT support professionals.

RS-232C(Serial) With RS-232C(Serial) Cable DE9 (D-Sub 9pin) Type

You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C(Serial) cable required for the connection between the PC and the TV, which is specified in the manual.
The connection interface may differ from your TV.

Phone jack Type

You need to purchase the phone jack to the RS-232 cable required for the connection between the PC and the TV, which is specified in the manual.
For other models, connect to the USB port.
The connection interface may differ from your TV.

Customer Computer

RS-232C configurations

3-Wire Configurations(Not standard)

Set ID

For the Set ID number, see “Real Data Mapping” on p.6

Press SETTINGS to access the main menus.
Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
Press the Navigation buttons to scroll to SET ID and press OK.
Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
When you are finished, press EXIT.

(Depending on model)

Communication Parameters

Baud rate: 9600 bps (UART)
Data length: 8 bits
Parity: None
Stop bit: 1 bit
Communication code: ASCII code
Use a crossed (reverse) cable.

Command reference list

(Depending on model)

| ****

COMMAND1

| ****

COMMAND2

| DATA

(Hexadecimal)

| | ****

COMMAND1

| ****

COMMAND2

| DATA

(Hexadecimal)

---|---|---|---|---|---|---|---
01. Power*| k| a| 00 to 01| 15. Balance| k| t| 00 to 64
02. Aspect Ratio| ****

k

| ****

c

| ****

(p.7)

| 16. Color (Colour) Temperature| ****

x

| ****

u

| ****

00 to 64

03. Screen Mute| ****

k

| ****

d

| ****

(p.7)

| 17. ISM Method (Only Plasma TV)| ****

j

| ****

p

| ****

(p.8)

04. Volume Mute| k| e| 00 to 01| 18. Equalizer| j| v| (p.9)
05. Volume Control| k| f| 00 to 64| 19. Energy Saving| j| q| 00 to 05
06. Contrast| k| g| 00 to 64| 20. Tune Command| m| a| (p.9)
07.

Brightness

| ****

k

| ****

h

| ****

00 to 64

| 21. Channel (Programme) Add/Del(Skip)| m| b| 00 to 01
08. Color/ Colour| k| i| 00 to 64| 22. Key| m| c| Key Codes

09. Tint

| ****

k

| ****

j

| ****

00 to 64

| 23. Control Backlight, Control Panel Light| m| g| 00 to 64
10.

Sharpness

| k| k| 00 to 32| 24. Input select (Main)| x| b| (p.11)
11. OSD Select| k| l| 00 to 01| 25. 3D (Only 3D models)| x| t| (p.11)
12. Remote Control Lock Mode| ****

k

| ****

m

| ****

00 to 01

| 26. Extended 3D (Only 3D models)| x| v| (p.12)

13. Treble

| ****

k

| ****

r

| ****

00 to 64

| 27. Auto Configure| j| u| (p.12)

14. Bass

| ****

k

| ****

s

| ****

00 to 64

| | | |

Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and are treated as NG.
With an RS232C cable, the TV can communicate the “ka command” in power-on or power-off status. but with a USB-to-Serial converter cable, the command works only if the TV is on.

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]: First command to control the TV. (j, k, m or x)
[Command 2]: Second command to control the TV.
[Set ID]: You can adjust the [Set ID] to choose the desired monitor ID number in the option menu.
The adjustment range in TV is 1 to 99. If the [Set ID] value is selected to ‘0’, every connected set can be controlled.
[Set ID] is indicated as decimal (1 to 99) on the menu and as Hexadecimal (0x00 to 0x63) on the transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read the status of the command.
[Cr] : Carriage Return – ASCII code ‘0x0D’
Space – ASCII code ‘0x20’

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]
The set transmits ACK (acknowledgment) based on this format when receiving normal data. At this time, if the data is in data read mode, it indicates present status data. If the data is in data write mode, it returns the data of the PC.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgment) based on this format when receiving abnormal data from non-viable functions or communication errors.
Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

When you enter the [data] in hexadecimal, refer to the following conversion table.
Channel Tune (ma) Command uses a two-byte hexadecimal value([data]) to select the channel number.
00: Step 0 32: Step 50 (Set ID 50) FE: Step 254
01: Step 1 (Set ID 1) 33: Step 51 (Set ID 51) FF: Step 255 … … …
0A: Step 10 (Set ID 10) 63: Step 99 (Set ID 99) 01 00: Step 256 … … …
0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 9998
10: Step 16 (Set ID 16) C8 : Step 200 27 0F: Step 9999
Commands may work differently depending on model and signal.
01. Power (Command: k a)
►►To control Power On or Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►►To Show TV is Power On or Off
Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.

Aspect Ratio (Command: k c)

(Main Picture Size)
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data Normal screen (4:3)
Widescreen (16:9)
Zoom
Zoom 2
(Latin America except Colombia Only)
Set by Program/ Original 14:9
(Europe, Colombia, Mid-East, Asia except South Korea and Japan)
Just Scan
0B: Full Wide
(Europe, Colombia, Mid-
East, Asia except South
Korea and Japan)
to 1F: Cinema Zoom 1 to 16
0c: 21:9 (Depending on model)

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

Using the PC input, you select either a 16:9 or 4:3 screen aspect ratio.
In DTV/HDMI/Component mode (high-definition), Just Scan is available.
The full wide mode may work differently based on the model and is supported for DTV fully, ATV, and AV partially.

Screen Mute (Command: k d)

select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on)
Video mute off
Screen mute on (Picture off)
Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
In case of video mute only, the TV will display On Screen Display(OSD). But, in case of Screen is muted, the TV will not display OSD.

Volume Mute (Command: k e)

To control volume mute on/off.
You can also adjust the mute using the MUTE button on the remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]

Volume Control (Command: k f)

To adjust volume.
You can also adjust the volume with the volume buttons on the remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]

Contrast (Command: k g)

To adjust screen contrast.
You can also adjust the contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Brightness (Command: k h)
To adjust screen brightness.
You can also adjust the brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
Color/Colour (Command: k i)
To adjust the screen Color(Colour).
You can also adjust the color in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
Tint (Command: k j)
To adjust the screen tint.
You can also adjust the tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 to Green: 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
Sharpness (Command: k k)
To adjust the screen sharpness.
You can also adjust the sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
OSD Select (Command: k l)
Select OSD (On Screen Display) on/off when controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off 01: OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
Remote control lock mode (Command: k m)
To lock the front panel controls on the monitor and remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off 01: Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
If you are not using the remote control, use this mode.
When the main power is off & on (plug-off and plug-in, after 20 – 30 seconds), the external control lock is released.
In the standby mode (DC off by off timer or ‘ka’, ‘mc’ command), and if the key lock is on, the TV will not turn on by power on the key IR & Local Key.
Treble (Command: k r)
To adjust treble.
You can also adjust it in the AUDIO menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
(Depending on model)
Bass (Command: k s)
To adjust Bass.
You can also adjust it in the AUDIO menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
(Depending on model)
Balance (Command : k t)
To adjust balance.
You can also adjust the balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
Color(Colour) Temperature (Command: x u)
To adjust color temperature. You can also adjust the Color(Colour)
Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
ISM Method (Command: j p) (Only Plasma TV)
To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min Orbiter
Normal
Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
Equalizer (Command: j v)
Adjust the EQ of the set.

Transmission [j][v][ ][Set ID][ ][Data][Cr]

Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
It depends on the model and can adjust when the sound mode is EQ adjustable value.
Energy Saving (Command: j q)
To reduce the power consumption of the TV. You can also adjust Energy Saving in the PICTURE menu.

Transmission [j][q][ ][Set ID][ ][Data][Cr]

Data
Off
Minimum
Medium
Maximum
Auto (For LCD TV / LED TV) /
Intelligent sensor (For PDP TV)
Screen off
(Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
Tune Command (Command: m a)
This command may work differently depending on the model and signal.
For Europe, Mid-East, Colombia, and Asia except South Korea and Japan Model
Select the channel to the following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ] [Data 01][ ][Data 02][Cr]

Analog Antenna/Cable

[Data 00][Data 01] Channel Data
Data 00: High-byte channel data
Data 01: Low byte channel data 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02: Input Source (Analog)
Antenna TV (ATV)
Cable TV (CATV)
Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data 00: High Channel data
Data 01: Low Channel data
00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data 02: Input Source (Digital)
Antenna TV (DTV)
Antenna Radio (Radio)
Satellite TV (SDTV)
Satellite Radio (S-Radio)
Cable TV (CATV)
Cable Radio (CA-Radio)

Tune Command Examples:

Tune to the Analog antenna (PAL) Channel 10.
- Set ID = All = 00
- Data 00 & 01 = Channel Data is 10 = 00 0a
- Data 02 = Analog Antenna TV = 00
- Result = ma 00 00 0a 00
Tune to the digital antenna (DVB-T) Channel 01.
- Set ID = All = 00
- Data 00 & 01 = Channel Data is 1 = 00 01
- Data 02 = Digital Antenna TV = 10
- Result = ma 00 00 01 10
Tune in to the satellite (DVB-S) Channel 1000.

Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
For South Korea, North/Latin America except Colombia Model
To tune the channel to the following physical/major/minor number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the.
Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital.
Analog Antenna/Cable
Data 00: Physical Channel Number
Antenna (ATV): 02~45 (Decimal: 2 ~ 69)
Cable (CATV): 01, 0E~7D (Decimal: 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data 01 & 02: xx (Don’t care)
Data 03 & 04: xx (Don’t care)
Data 05: Input Source (Analog)
00: Antenna TV (ATV)
01: Cable TV (CATV)
Digital Antenna/Cable
Data 00: xx (Don’t care)
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05: Input Source (Digital)
Antenna TV (DTV) – Use Physical Channel Number
Cable TV (CADTV) – Use Physical Channel Number
Antenna TV (DTV) – Don’t Use Physical Channel Number
Cable TV (CADTV) – Don’t Use Physical Channel Number
Cable TV (CADTV) – Use Physical/Major Channel Number Only (One Part Channel)
Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel)
Cable DTV Plus – Use the Physical Channel Number
Cable DTV Plus – Don’t Use Physical Channel Number
Cable DTV Plus – Use Physical/Major Channel Number Only (One Part Channel)
Cable DTV Plus – Use Major Channel Number Only (One Part Channel)
Two bytes are available for each major and minor channel data, but usually, the low byte is used alone (the high byte is 0).

Tune Command Examples:

Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01
Tune to the digital antenna (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x]

For Japan Model
To tune the channel to the following physical/major/minor number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital Antenna/Satellite
Data 00: xx (Don’t care)
[Data 01][Data 02]: Major Channel Number
Data High byte Channel Data
Data Low byte Channel Data 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data High byte Channel Data
Data Low byte Channel Data
Data: Input Source (Digital/Satellite for Japan)
Antenna TV (DTV)
Antenna TV (DTV) – Use Physical/Major
Channel Number Only (One Part Channel)
Antenna TV (DTV) – Use Major Channel Number Only (One Part Channel)
BS (Broadcasting Satellite)
CS1 (Communication Satellite 1)
CS2 (Communication Satellite 2)

Tune Command Examples:

Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
Data 05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02
Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
This feature is varied based on the model.

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x]

Channel(Programme) Add/Del(Skip) (Command: m b)
To skip the current channel(program) for next time.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add Ack [b][ ][Set ID][ ][OK/NG][Data][x]
Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add.
Key (Command: m c)
To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code – p.2.

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

Control Backlight (Command: m g)
For LCD TV / LED TV
To control the backlight.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

Control Panel Light (Command: m g)
For Plasma TV
To control the panel light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 to Max: 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

Input select (Command: x b) (Main Picture Input)
Select the input source for the main picture.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data
DTV
Satellite DTV
ISDB-BS (Japan)
ISDB-CS1 (Japan)
ISDB-CS2 (Japan)
CATV
CADTV
ATV
AV or AV1 21 : AV2
Component1
RGB
Component2
HDMI1
HDMI3
HDMI2
HDMI4

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

This function depends on the model and signal.
3D(Command: x t) (only 3D models) (Depending on model)
To change the 3D mode for TV.

Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr]

(Depending on model)
Data Structure
[Data 00] 00: 3D On
3D Off
3D to 2D
2D to 3D

[Data 01] 00: Top and Bottom

Side by Side
Check Board
Frame Sequential
Column interleaving
Row interleaving
[Data 02] 00: Right to Left
Left to Right
[Data 03] 3D Effect(3D Depth): Min : 00 – Max : 14 (*transmit by Hexadecimal code)
[Data 02], [Data 03] functions depend on the model and signal.
If [Data 00] is 00 (3D On), [Data 03] has no meaning.
If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning.
If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning.
If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal

7	6	5	Frequency	4	3	2	1	0	Step
0	0	0	1st Band	0	0	0	0	0	0(decimal)
0	0	1	2nd Band	0	0	0	0	1	1(decimal)
0	1	0	3rd Band	…	…	…	…	…	…
0	1	1	4th Band	1	0	0	1	1	19(decimal)
1	0	0	5th Band	1	0	1	0	1	20(decimal)

X: don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] [Data03][x] [t][ ][Set ID][ ][NG][Data00][x]
Extended 3D(Command: x v) (only 3D models) (Depending on model)
To change the 3D option for TV.

Transmission [x][v][ ][Set ID][ ][Data 00][ ]

[Data 01][Cr]
[Data 00] 3D option
3D Picture Correction
3D Depth (3D Mode is Manual Only)
3D Viewpoint
3D Color Correction
3D Sound Zooming
Normal Image View
3D Mode (Genre)
[Data 01] It has its range for each 3D option determined by [Data 00].
When [Data 00] is 00
Right to Left
Left to Right
When [Data 00] is 01, 02
Data Min: 0 – Max: 14 (*transmit by Hexadecimal code)
Data value range(0 – 20) converts Viewpoint range (-10 – +10) automatically (Depending on the model)
This option works when 3D Mode (Genre) is manual only.
When [Data 00] is 06, 07
Off
On
When [Data 00] is 08
Revert to 3D video from 3D-to-2D converted 2D video
Change 3D video to 2D video, except 2D-to-3D video
If the conversion condition isn’t met, the command is treated as NG.
When [Data 00] is 09
Standard
Cinema
Manual
Sport
Extreme
Auto

Ack [v][ ][Set ID][ ][OK][Data00][Data01][x] [v][ ][Set ID][ ][NG][Data00][x]

Auto Configure (Command: j u) (Depending on model)
To adjust the picture position and minimize image shaking automatically. It works only in RGB (PC) mode.

Transmission [j][u][ ][Set ID][ ][Data][Cr]