HUAJIA TECHNOLOGY INDUSTRY CO LTD BC1049 R C Excavator Instruction Manual

HUAJIA TECHNOLOGY INDUSTRY CO LTD BC1049 R C Excavator Instruction Manual

Remote Control

This manual contains important information, please keep it properly.

• Multi-directional Remote Control

• 680° Rotation

• Digging Function

• Unloading Function

• One-Click Demo

• Sound Function

• Front Headlight

Preface

• Thank you for purchasing our product. Please read this manual carefully before use and retain it for future reference.

Product Configuration

• Excavator x1

• Remote controller x1

• 3.7V rechargeable batteryx1

• USB charging cable x1

Major Parts Of The EXCAVATOR

1. Excavators arm
2. Track-Type Wheels
3. Simulation Control Deck
4. Battery compartment

Battery Installation And Use

Remote Control Battery Installation

Unscrew counter clockwise to open the battery compartment cover, install 2X1.5″AA” batteries (batteries not included) into the battery compartment according to the given polarity, screw clockwise to close the battery compartment.

Excavator Battery Installation

Making sure that the power swish is in the OFF position, remove the screw form the battery cover and remove the battery compartment cover. Insert the power connector of the 3.7V rechargeable battery into the power connector of the excavator battery compartment, screw clockwise to close the battery compartment.

WARNING
Remove the battery if the Excavator is not going to be used for a long time

Excavator Battery Charging

Insert the power connector of the battery into the USB charging cable, and then connect the USB charging cable to the adapter or the USB port on the computer. When charging is proceeding, the red light keeps solid on, when charging is finished, the red light is off. The charging time is about 3-4 hours.

Operation Demonstration

Remote control 1 The excavator moves forward;
Remote control (2), The excavator moves backward.
|
---|---
Remote control 1 The excavator turn left;
Remote control (2) The excavator turn right.
|
Remote control 1.
The excavator arm digging/push back.
|
Remote control 1, The excavator control deck 680° to the left;
Remote control (2) The excavator control deck 680° to the right
|
Press the remote control button (As shown in the picture), the excavator will automatically demonstrate.
|

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>