DOMETIC GM BT1YL Automotive Console Cooler Instruction Manual
- June 15, 2024
- Dometic
Table of Contents
DOMETIC GM BT1YL Automotive Console Cooler
Specifications
- Product Name: GM BT1YL Automotive Console Cooler
- Model Number: BT1YL
- Power Source: Automotive 12V DC
- Capacity: Not specified
- Dimensions: Not specified
- Weight: Not specified
Product Usage Instructions
Important Note
Please read this operating manual carefully before starting to use the GM BT1YL Automotive Console Cooler. Keep the manual in a safe place for easy reference. If you plan to transfer the cooler to someone else, make sure to hand over the manual as well.
Caution
Caution : The user is cautioned that any changes or modifications not
expressly approved by the responsible party may void the user’s authority to
operate the equipment.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s) and Part 15 of the FCC Rules. The operation is subject to the following
conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC & IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
GM BT1YL Automotive Console Cooler
The GM BT1YL Automotive Console Cooler is designed to keep your beverages
and food items cool while on the go. It is specifically designed to fit in
your vehicle’s center console.
Warning:
Do not touch the bin surfaces with wet hands while the bin is cooling. The
skin could stick to the bin surface, causing injury. Always make sure your
hands are dry before handling the cooler.
Cleaning:
The bottom mat of the cooler is removable for easy cleaning. Use water and
mild soap to clean the mat. When cleaning the refrigerator bin, make sure the
vehicle is turned off. Use a damp, soft rag to wipe the bin carefully. Avoid
scratching or puncturing the bin surfaces. After cleaning, ensure the bin is
completely dry before turning on the refrigerator.
FAQ (Frequently Asked Questions)
-
Q: What is the power source for the GM BT1YL Automotive Console Cooler?
A: The power source for this cooler is the automotive 12V DC power outlet in your vehicle. -
Q: What is the capacity of the cooler?
A: The capacity of the cooler is not specified in the user manual. Please refer to the product packaging or contact customer support for more information. -
Q: What are the dimensions and weight of the cooler?
A: The user manual does not provide information regarding the dimensions and weight of the cooler. For specific measurements, please refer to the product packaging or contact customer support.
Please read this operating manual carefully before starting to use this device. Place the manual in a safe place for easy viewing. If transferring the fridge to someone else, please hand it over together with this manual.
Important Note
Center Console R efrigerator
-
If equipped, the center console refrigerator can only be powered on and accessed using the infotainment screen.
-
The refrigerator mode can only be used while the vehicle is in accessory power or on. If the vehicle is turned off and turned back on, the last refrigerator operating mode will be resumed.
-
A light inside the refrigerator turns on when the refrigerator doors are opened. The driver’s side refrigerator door cannot open or close when the vehicle is in motion.
Caution : Do not put any objects between the front seats and the center console side walls. The air path could be blocked and cause the unit to stop working. -
The bin wall will reach 15°C (5°F) while cooling. The operating temperature is 30C (37.4°F).
Warning : Do not touch bin surfaces with wet hands while the bin is cooling. Skin could stick to the bin surface. -
The bottom mat is removable. Clean with water and mild soap.
-
Clean the refrigerator bin while the vehicle is turned off. Use a damp, soft rag and wipe the bin carefully. Do not scratch or puncture the bin surfaces. Ensure the bin is dry before turning the refrigerator on.
Caution
Radio Frequency Statement (US/CAN)
This vehicle uses license-exempt transmitters/ receivers/ systems that operate
on a radio frequency that complies with Part 15/ Part 18 of the Federal
Communications Commission ( FCC) rule!’s and with Innovation, Science and
Economic Development (ISEO) Co1nada’s license-exempt RSS(s) / RSP-100 / ICES-
GEN
Operation is subject to the following two conditions:
- The device may not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation of the device. Changes or modifications to any of these systems other than an authorized service facility could void authorization to use this equipment.
Radio Frequency Statement (MEXICO)
This vehide has systems that operate on a radio frequency that complies with
NOM•EM•Ol 6·SCF1·2015 or NOM•208-SCF1·2016 and National Radio Frequency
Allocation Chart. Operation of this equipment is subject to the following two
conditions:
- This equipment or device may not cause harmful Interference.
- This equipment or device must accept any interference received, including interference that may cause undesired operation.
Caution : The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC & IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be co
located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>