TOZO Golden X1 Wireless Earbuds User Manual

TOZO Golden X1

OVERVIEW

Make you a feeling of immersion

The combination of the Dynamic and Armature drivers provide 12Hz ~ 44.1KHz super wide range responds. Capable of express every detail of sounds vividly. Treble like original guitar’s sweet metallic crisp. A needle falls onto ground. And even can restores the earth’s trembling subwoofer.

Features with the advanced Bluetooth 5.3 technology

Featured with Hi-Res Audio

Functionality at Your Fingertips

The TOZO X1 earbuds support a single squeeze for play or pause, double squeeze for the next track, squeeze and hold to turn noise cancellation on or off, etc. You may also slide your finger up or down on the earbuds to adjust the volume without taking out your phone.

X1: Press once X2: Press twice X3: Press three times Hold: Press and hold for 2 seconds

TECH SPECS

• Hybrid Dynamic Driver & Balanced Armature Driver
• Balanced Armature Driver & Hi-Res Audio
• LDAC HD Audio-decoding
• OrigX Pro High Quality Sound
• Environment And Active Noise Cancellation
• Charging Compatibility & LED Digital Display
• Support TOZO APP & 16 Preset EQ Modes
• Ergonomic Design & Long Distance Connectio

Earphone| Type: In-ear True Wireless
Model: X1
---|---
Audio quality| Driver: φ12 mm dynamic driver + Knowles balanced armature driver
Frequency response range: 12Hz – 44.1kHz
Audio codec: LDAC / AAC / SBC
Noise cancellation| Noise control modes:
Noise Cancellation / Leisure Mode / Custom Pattern / Reduce Wind Noise/
Transparency Mode / Noise Cancellation Off
Call Noise Cancellation: Triple-Microphone with ENC Call Noise Reduction
Battery Life| Battery capacity: 55mAh(earphones) / 500mAh(charging case)
Music play time (AAC, Default setting, 50% volume):
Max Noise Cancellation: 5h (single charge)
Noise Cancellation Off: 8h (single charge)
Charging| Cable Charge Time: 2h (earphones) /2h (charging case)
Charging port: USB Type-C
Charging input (charging case): 5V⎓500mA（USB-C）/5V⎓400mA（wireless charging）
Charging output (charging case): 5V⎓50mA2
Charging input (earphones): 5V⎓50mA
Wireless charger: Qi wireless charging supported
Water resistance| Water resistance – earphone: IPX6
Bluetooth| Bluetooth version:BT 5.3
Effective Bluetooth range:10m
Weight and Dimensions| Weight (each ear):5.8g（±0.2g）
Weight (charging case):43g（±1g）
Weight (entire device):54.6g（±1g）
Dimensions of charging case:69.934.238.2mm

FAQ

Cannot answer a call

Check the setting of answering method on your cell phone and confirm if need some setting when connecting the Bluetooth device.

What should I do if the computer says they need a driver or transmitter

to connect the earbuds?

Here are some methods for your reference.

• Download a Bluetooth receiver to connect(in the computer settings)
• Kindly check if your computer’s Bluetooth version supports Bluetooth 5.0

How to adjust the volume by earbuds?

Long press L or R earbud to adjust the volume while playing music.

R earbud Volume +

L earbud Volume –

The volume adjustment is not available when it`s connected to a TV and computer.

Why the earbuds does not hold a charge?

1. Check if the metal connector is dirty, try to wipe it softly with dry cloth, paperclip or paper towels. (sweat or humidity may also lead to disconnection )

2. Please have the battery case fully charged at the beginning without putting the earbuds in.

• Swap the left and right earbuds to charge for a try.
• Put the left one in the right side of the case, so does the right earphone, which is put in the left side of the case.
• Confirm whether it’s the issue of battery case after operating steps above.

3. Reset could solve many problems occurred.

How to reset the earbuds?

Earbuds (or either one of earbuds) does not pair or connect/ Sound cuts in and out/ Earbuds cannot be found on Bluetooth Search

T10 Earbuds:

1. Before resetting, delete/remove all TOZO on Bluetooth, and turn off BT as well.

2. Press earbuds’ panel for 5 seconds to turn off (red light flashes) the device.

3. Seconds later, touch and hold both earbuds for 5 seconds till red/blue lights flashes simultaneously. Then touch both earbuds three times, once purple light flashes, reset competed.

4. At last, turn on the BT and re-connect.

T6 Earbuds:

1. Before resetting, delete/remove all TOZO on Bluetooth, and turn off BT as well.

2. Press earbuds’ panel for 5 seconds to turn off (red light flashes) the device.

3. Seconds later, touch and hold both earbuds for 5 seconds till red/blue lights flashes simultaneously. Then touch both earbuds three times quickly, once purple light flashes, reset competed.

4. At last, turn on the BT and re-connect.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>