media-tech MT6528 Dental Flossjet Instruction Manual

June 15, 2024
media-tech

media-tech-LOGO

media-tech MT6528 Dental Flossjet

media-tech-MT6528-Dental-Flossjet-PRODUCT

PRECAUTIONS

  • All information contained in this section is intended to instruct the user in the proper and safe operation of this equipment to avoid personal injury, injury to others, and property damage.

READ ALL INFORMATION BEFORE USE

DANGERS

  • Infants and people who cannot operate devices should not use these devices. Please keep it out of reach of children.
  • Never modify the device. Also, do not attempt to disassemble or repair.
  • Do not place or store the product where it could fall or be dragged into a bathtub or sink.
  • Do not reach for a product that has fallen into the water. Disconnect immediately.
  • Do not use the product while bathing.
  • This appliance can be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children should not play with the device. Cleaning and maintenance must not be performed by children without supervision.
  • The device may only be used with the power supply supplied with the device.
  • The battery must be removed from the device before scrapping.
  • The device must be disconnected from the mains when removing the battery;
  • The battery should be disposed of safely.
  • For how to remove the battery, see “Disposal”.
  • Do not fill the tank with water at a temperature higher than 40°C.
  • If the external hose or cable of this transformer is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard.
  • Keep the cord away from hot surfaces.
  • Do not use the device if you have lost the nozzle.
  • Do not immerse the device in water.
  • Do not use it for purposes other than oral cleaning.
  • Keep the nozzle away from small children. The nozzle is small enough to be swallowed and get stuck in the throat.
  • Some types of mouthwash can damage the equipment by cracking the housing or water tank.

Therefore, do not use mouthwash in the water tank.

  • People experiencing tooth or gum pain may not be able to use this device and should consult their dentist.
  • Do not press the nozzle too hard on your teeth or gums. This may cause injury to the gums.

DEVICE DESCRIPTION

media-tech-MT6528-Dental-Flossjet-FIG-1

  • a. Nozzle
  • b. Charging connector
  • c. ON/OFF/MODE button (operating mode)
  • d. Operating mode indicators (soft, normal, pulsating)
  • e. Water tank
  • f. Silicone charging port plug
  • g. Ventilation opening
  • h. Water tank inlet with plug

USE

  • Before first use, be sure to fully charge the device’s battery.
  • Remove the rubber cap from the micro USB charging connector and insert the device plug into the device socket (make sure there is no liquid left in the socket before inserting the plug into the socket).
  • Connect the USB-A plug of the charging cable to a 5V 1-2.4A USB charger
  • The [d] indicators will flash while charging. Full charging is indicated by the continuous light of all 3 LEDs.
  • Put the rubber cap back on the micro USB connector after charging is complete.
  • Attach the nozzle by inserting it into the hole so that the embossing points to the “ON” position, then turn it to the “OFF” position.
  • Open the water tank cap to fill it with water at a temperature not higher than 40°C, then close the cap.

IMPORTANT! We recommend using cooled, boiled water for rinsing to prevent contamination of the irrigator with possible scale and iron deposits.

media-tech-MT6528-Dental-Flossjet-FIG-2

  • Press the “ON/OFF/MODE” button to select the operating mode
    Soft: gentle cleaning for sensitive gums
    Normal: normal washing.
    Pulse: washing and massaging the gums.

  • Hold the device in a vertical position with the nozzle tip pointing towards the teeth.

  • Keep your mouth slightly open to let the water escape.

  • Direct the water stream at a 90° angle to the teeth and gums.

  • Direct the stream slowly along the teeth.

  • Direct the water jet along the gum line at a 90° angle.

  • Direct the jet to the interdental spaces, around orthodontic appliances, crowns and bridges.

media-tech-MT6528-Dental-Flossjet-FIG-3

After washing

  1. Pour out the remaining water from the tank
  2. Turn the irrigator on and off quickly to remove any remaining water from the device itself.
  3. Wipe the device dry with a cloth.

Important! To prevent the spread of bacteria, make sure there is no water inside the device. If you do not intend to use this device for a long time, make sure that the device is wiped and dried immediately before storing it.

Maintenance

  • Use only water or a neutral cleaning agent to clean the device.
  • Never use caustic or abrasive agents (e.g. vinegar or limescale removers) as they may damage the device.
  • Do not wash in hot water above 50°C.
  • Keep the device away from high-temperature areas and avoid direct sunlight.

Main part

  1. Remove dirt with liquid soap and water, and wipe dry.
  2. Do not immerse the main part in water.
  3. Dry after rinsing with water

Water tank cap
Wipe off the dirt with a cloth.
Nozzle

  1. Rinse with water and wipe with a soft cloth.
  2. Replace the nozzle every 6 months.

Tank

  1. Rinse with water and wipe with a soft cloth.
  2. Dry the tank if it is not used for a long time.

IMPORTANT! The micro USB charging port should always be kept clean and protected from getting wet. Before each use, make sure that the silicone plug fully covers the micro USB charging port, as flooding this port with water will damage the device, which is not covered by the warranty.
IMPORTANT! Never use the irrigator dry. If the water in the tank runs out, immediately turn off the device using the ON/OFF button and refill

FEATURES

  • Portable dental water flosser
  • Gently and effectively washing interdental areas, braces, dental crowns & bridges
  • 3 washing modes: normal, soft, pulse
  • Water tank capacity: 150ml
  • Efficiency: water pressure 20-110psi, 1200 pulse/min (pulse mode
  • 3 nozzle types
  • 360° nozzle rotation
  • Micro USB cable charging
  • 3 min auto shut-off timer
  • Waterproof: IPX7 for water cleaning
  • Low noise: <75dB
  • Power: lithium rechargeable battery to use fully charged device up to 40 cleaning cycles
  • Dimensions: 60x60x215mm
  • Weight: 269g

Due to continuous development, the specifications and appearance of the device may change without prior notice. Technical support is available at www.me- dia-tech.eu.

Troubleshooting

media-tech-MT6528-Dental-Flossjet-FIG-4

Environmental guidance

The device is marked with the symbol of a crossed-out waste container, under the European Directive 2012/19/EC on waste electrical and electronic equipment. Products marked with this symbol should not be disposed of or disposed of after the end of their useful life together with other household waste. The user is obliged to dispose of waste electrical and electronic equipment by delivering it to a designated point where such hazardous waste is recycled. The collection of this type of waste in separate places and the proper process of their recovery contribute to the protection of natural resources. Proper recycling of waste electrical and electronic equipment has a beneficial effect on human health and the environment. To obtain information on where and how to dispose of waste electrical and electronic equipment in an environmentally safe way, the user should contact the relevant local authority, the waste collection point or the point of sale where he purchased the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals