media-tech MT872 Smart Watch User Manual

media-tech MT872 Smart Watch

Introduction

The device requires Android 5.0 or later or iOS 8.5 or later. power supply that your smartphone supports the standard Bluetooth 5.0 (BLE) power supply. Please note that the watch is connected to the main source and microphone, not connected to the device.

General view

Attention! Before first use, charge the device for at least 4-6 hours. If the device is not used for a long time, please charge it once a week.

Charging your device

Use the included inductive charger. Connect it to the USB-A port of your computer or a USB charger with parameters SV 1-3A. Do not use .fast” ones with higher current and/or voltage, as this may damage the inductive charger and the watch.

Attention! The set does not include a USB charger.

How to enable/disable

Press and hold the . Power/resume• button for 5 seconds, the device will turn on. If you want to turn it off, do the same and the watch will turn off. The power button also functions as the screen wake-up/off button.

First connection with a smartphone

IMPORTANT! Setting the time, date and other parameters Is done only from the Installed FITPRO application, which must be downloaded from the Google Play store (Android) or Apple store

SCAN THE OR CODE TO DOWNLOAO THE APP :

|
---|---

IMPORTANT! You should not pair the MT872 from the Bluetooth Interface of your smartphone, but from the previously Installed FITPRO application

The smartwatch and the application require an active location service (GPS), an active Bluetooth interface and data transmission (WIFI locally or mobile data transmission) to function properly.
After installing the FITPRO app, you can immediately pair your watch. However, we recommend that you create a user account so that your measurements, achievements and other parameters will be saved. Launch FITPRO. Click the icon (1) and then (2) to search for the device

After a while, a list of found Bluetooth devices will appear, including the,,MT872″ watch (3). Click on this name and the synchronization process will take place, setting the time and date etc.
The FITPRO application will ask for permission to access smartphone functions, including contacts, which is necessary for proper functioning, You must agree and approve each time.

Button and touch panel operation

Resume screen – press any button to display the home screen/watch face or raise your hand (raise hand detection must be enabled in the application) Changing the dial – swipe the dial to the left on the screen to change it. You can also use the knob for this Show smartwatch functions – press the Phone” button twice. The function window will appear. These will be discussed in a moment

Gestures on the smartwatch home screen

Control menu
From the time dial, swipe down the screen for quick access to functions:

Enable/disable Bluetooth voice mode (sound and phone calls)
App Menu Styles – Select one of 6 watch app menu styles:

Player- media control, requires Bluetooth audio enabled

Screen brightness

Airplane mode
Do not disturb• mode (the watch does not respond to incoming calls and messages)

The news
From the time face, swipe down to view your messages.

Most popular features
From the time face, swipe right to view the most popular features one by one

QR code to download the FITPRO application from the store
Quick call to the SOS number (previously set In the FITPRO application phone book)
Statistically the most frequently used applications

Application menu Icons
By pressing the button on the dial twice, you will access the watch’s application menu. The application Is selected by turning the knob or sliding your finger across the screen and confirming the position by touching the selected position with your finger.

More important applications
Numeric keypad for phone calls (BT audio connection to smartphone required)

Sports (running, cycling, jumping, tennis, volleyball, etc.)

Blood oxygen level

**Blood oxygen level

**

Phone book (note, It must be created separately In the FITPRO application, it Is not a list of contacts from the smartphone)

**Heart rate (ECG)

**

Smartphone camera control

**Stopwatch

**

**Pressure Measurement

**

**Breathing Turning

**

Game

**Calculator

**

Manage watch functions

Important. The MT872 smartwatch ,snot a medical device and cannot m any way replace profess, opal medical devices for measuring heart rate, pressure and blood oxygenation. The results can only be treated as mformat1ve and theorem, cal. In case of any doubts, please consult your doctor.

In order for the pulse and oxygen pressure measurements to be as accurate as possible, make sure that the watch is fastened not too tightly and not too loosely on the wrist. The level of measurement may be influenced by the degree of hair, tan or lubrication (e.g. with cream}. Measurements can be activated using the watch or application by clicking one of the icons.

Manage watch functions

After adding the watch and active connection, you can go to the .Set” option to set or run other functions of the device. Note – the order and naming of functions may vary depending on the version and language of the smartphone system.

Find – finding the watch (light vibration) Remote shutter – activates the smartphone camera and allows you to take a photo remotely Message push – set smartphone apps that can display messages on the watch Dial settings – access to dozens of creative dials and the ability to change them on the watch Reset device – resetting the watch Remove – disconnect (remove) the watch and data from the application Other – activation of weak vibrations OTA upgrade – remote update of the smartwatch firmware Background setting – setting application permissions

FEATURES

• Bluetooth calling smartwatch
• Measuring blood pressure, heart rate, oxygen
• Multisport & sleep monitoring, burned calories calculating, sedentary reminder, alarm clock
• Full screen touch operation
• Full square TFT display
• 3 buttons + dial for better & easy operation
• Wide range of graphic watch faces in APP
• Dual Bluetooth 5.0 & 5.0 technology
• Induction charging
• Connecting by Bluetooth with Android and iOS smartphones
• Gesture wake-up
• BT calling receiving voice connection (BT paired smartphone in range required)
• Displaying caller number or name
• Incoming SMS notification
• Bluetooth calling, outgoing and incoming calls
• Social networks and messengers activity notifications
• Remote still photos shutter for smartphone camera (by shaking)
• Microphone, sound & vibrations

Due to continuous development, product specifications and appearance may change without prior notice. For technical support, please visit www.medio- tech.eu.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>