media-tech MT5108 Smart RC Duplicator Instruction Manual

October 30, 2023
media-tech

MT5108 Smart RC Duplicator
Instruction Manualmedia tech MT5108 Smart RC Duplicator -
fig MT5108

MT5108 Smart RC Duplicator

COMPATIBLE LIST
RCS means rolling code simple
RCC means rolling code complex, seed code needed
SC means simple coding, can work after duplicatingmedia tech MT5108 Smart RC
Duplicator

BRAND MODEL REMARKS
ACM TX2, TX COLOR, TX4 RCS
ADYX TE4433H BLUE, 433-HG BRAVO RCC
AERF COMPACT, HY-DOM, MERCURI B, MERCURI C, SABUTON, MARS, SATURN, ST3/N,
TERRA, TMP-1, TMP-2, UNITTECH RCC
ALLMATIC BROWN, BROWN RED, BRO.OVER, PASS, MINIPASS, TECH3 RCC
APERIO GO, GO PRO, GO MINI SC
APERTO (Sommer) 4020-TX03-434, TX02-434-2, TX02-868-2 RCS
APRIMATIC TR, TM4, TXM RCC
ATA PTX4 BLU, PTX4 PINK RCS
AVIDSEN 104251, 104250, 104250 OLD, 104250 RED, 104257, 104350, 654250 RCS
BALLAN FM400, FM400E RCS
BENINCA IO RCS
BFT MITTO, MITTO M, MITTO RCB, MITTO A, TRC, GHIBLI, MURALE, KLEIO RCC
CARDIN TRQ S449, XRADO, TRQ S449 GREEN (PRECODE), TXQ S449, TXQ S449 GREEN,
TRQ S486, TXQ S486, S437 TX RCC
CASALI JA33 AMIGO SC
CASALI GENIUS/CASALI A252RC RCC
CHAMBERLAIN/LIFT MASTER/ MOTOR LIFT 953ESTD, 971LM, 84330E, 94334CE,

94333E.94334E/94335E, 9747E, 1A5639-7, 1A5477, 1A6487,  132B2372, 94330EML/9333EML/94335EML, 84330EML/84333EML/84335EML,8747EML| RCS
CLEMSA| MUTANCODE, T, T-8, E-CODE N| RCS
CLEMSA| MASTERCODE MV| SC ATTENTION! FIXED CODE
DASPI| ZERO RC| RCS
DEA SYSTEM| PUNTO 278, GOLDR, GENIER 273, GENIE R- GT2N, MIO TR, GT2M, TRN| RCS
DITEC| BIXLP, GOL4, BIXLG| RCC
DOORHAN| TRANSMITTER 4| RCS
DOORMATIC| MILENY, MILENY-EVO| RCS
ECOSTAR| RSC, RSE, RSZ| RCS
ERREKA| IRIS, ROLLER 2, ROLLER 433, ROLLER 868, SOL433, SOL868, VEGA 433, VEGA 868| RCC
FAAC| TML 433SLH, DL 868 SLH,XT 868 SLH, XT 433 SLH, T 868 SLH, T 433 SLH, XT 868 SLH BLACK, XT 433 SLH BLACK| SC
FAAC| XT 433 RC, TE433HG, XT4 433 RCBE| RCC
FADINI| JUBI-SMALL, JUBI 433| RCC
GENIE| GITR-3, GIT, GICT390, GIFT390-1, G3T-BX, G1T-BX, GM3T, GICTD, GIFTD| RCS
GENIUS| AMIGOLD, AMIGO, KILO| SC
GENIUS| BRAVO, ECHO| RCC
GIBIDI| Au1600, AU1600 WOOD, AU1680, AU1680 WOOD, DOMINO| RCC
HORMANN| HSM2,HSM4,HSE2 868| RCS
JCM| NEO, TWIN| RCC
JCM| GO, GO PORTIS, GO NORTON| SC
KBLUE| ETH-TEL01| RCS
KEY| 900TXB-42R, TXB 44R, SUB 44R| RCS
BRAND| MODEL| REMARKS
---|---|---
KING GATES| CLIPPER, STYLO| RCC
KLING| KUA, KUA E, KUA S| RCS
LABEL| SPYCO| RCS
LIFE| FIDO| RCS
LINEAR| MCT-11, ACT-21, ACT-22, STING RAY ACT- 31, STING RAY ACT| RCS
MERLIN 2.0| E945M, E943M, E940M| RCS
MERLIN/ PROLIFT| C945, C940, C943, M842, M844| RCS
MHOUSE| TX3, TX4, GTX4| RCC
MOOVO| MT4G| RCC
NICE| SMILO, FLOR-S, VERY-VR, FLOR-S ERA| RCC
NICE| ONE (ON), ON ERA, INTI, ERGO, PLANO, ONE (ON FM)| SC SCC
NORTON| GO NORTON,GO MINI NORTON| SC
NOVOFERM| MCHS, MICRO-NOVOTRON 502, MINI- NOVOTRON 504, MICRO-NOVOTRON 502, MICRO-NOVOTRON 504, MICRO- NOVOTRON 31, MICRO- NOVOTRON 51, MINI-NOVOTRON 30, MINI-NOVOTRON 50, MNHS| RCS
O&O| TX, T.COM R4-2, T.COM R8-2, TWIN, TX (NEO)| RCC
PECCININ| TX MENBRANA| RCS
PRASTEL| MTE, MPSTLE, MPSTP2E, TCE, BFOR,TRQ-P, SLIM-E| RCC
PUJOL WARNING YOU MIGHT FACE CUSTOMISED CODES NOT DUPLICABLE| TWIN, VARIO, VARIO MARS, VARIO OCEAN, NEO| RCC
RIB| LITHIO| RCS
ROPER| NEO| RCC
ROPER| GO ROPER, GO MINI ROPER| SC
SABUTOM| BROOVER, BROSTAR| RCC
SEA| HEAD, SMART DUAL ROLL, SMART-3 ROLLING CODE,COCCINELLA| RCS
SEAV| BE HAPPY RS| RCS
SECULUX| NEO| RCC
SILVELOX| MHz 2007, QUARZ SAW| RCS
SIMINOR| CVXNL, MITTO| RCC
SIMINOR| SIM433| RCS
SOMFY| K-EASY, K-EASY NEW, K-EASY OLD, MITTO, KEY GO RTS, TELIS RTS, KEYTIS RTS, KEYTIS RTS NS, ALARMA| RCC
SOMMER| 4010, 4011, 4014 TX03-434-2, 4013 TX03- 434-4, 4020 TX03-868-4,  4026 TX03-868-2, 4022 TX02-434-2, 4025 TX02-868-2, 4031 TX08-868-4| RCS
STAGNOLI| KALLISTO, VENUS AV223| RCS
TAU| 250K-SLIMRP, 250K-SLIMR,250T-4RP| RCC
TELCOMA| FM400E, FM400| RCS
TOR LIFT| TORMIT4| RCS
V2| TSC, TXC, TRC, HANDY, PHOENIX, PHOX 433| RCC
VDS| ECO-R, TRQ P| RCC

SMART RC DUPLICATOR

User manual
I. Fixed code duplicating procedures

  1. Press and hold button 1 of the duplicator, meanwhile press 4 times the 2 button.
  2. Release both buttons. Now the RED LED emits a short flash every 2 seconds.
  3. Place the original remote control next to duplicator around 5cm
  4. Keep pressing the button of the original remote control and wait for a change flash (as a faster flash) of duplicator RED LED and a change of its color (BLUE) that confirms the correct learning of code. This step may take a few seconds and during that the color LED is RED.
  5. While the BLUE LED is flashing, press the button of the duplicator where you want to program the code just learnt, and retain pressed until the LED switches off . This step may take some seconds.
  6. Repeat the duplication from step 1 to the rest buttons.

II. Rolling code (simple code) duplicating procedures

  1. Press and hold button 1 of the duplicator, meanwhile press 4 times the 2 button.
  2.  Release both buttons. Now the duplicator RED LED will emit a short flash every 2 seconds.
  3. Place the original remote control next to duplicator around 5cm
  4. Keep pressing the button of the original remote control and wait for a change flash (as a faster flash) of duplicator RED LED and a change of its color (BLUE) that confirms the correct learning of code. This step may take a few seconds and during that the color LED is RED.
  5. While the BLUE LED is flashing, press the button of the „duplicator” where you want to program the code just learnt, and retain pressed until LED will switch off.
  6. Repeat the duplication from step 1 to the rest buttons.
  7. Activate now the correct procedure for the programmed model and insert the new remote control on the receiver (seethe compatibility list present in this manual).

III. Rolling code (complex code) duplicating procedures 3.1: BFT

  1. Press and hold button 1 of the duplicator, meanwhile press 4 times the 2 button.
  2. Release both buttons. Now the duplicator RED LED will emit a short flash every 2 seconds.
  3. Place the original remote control next to duplicator around 5 cm.
  4. Keep pressing the button to be programmed of the original remote control, till the RED LED will switch on as fix light; now release the button.
  5. The duplicator RED LED will emit a short flash every 2 seconds. This indicates it is necessary to emit the SEED CODE to realize the copy.
  6. To transmit the SEED CODE of the BFT original remote control, please use a pin, press the rear hide button (see the picture) or according to the new references, press the 1 and 2 buttons until the original remote control LED switches on.
  7. Now the duplicator RED LED will change the flash mode (faster) and color (BLUE), for a reconfirmation of the correct code learning. This step may take few seconds. At this moment, press the duplicator button when you want to store the code and retain pressed until the duplicator BLUE LED switches off. Repeat the duplication from Step 1 to the rest buttons.
  8. Activate now the RCC procedure to insert the new remote control on the receiver.

3.2: V2 433 – 868

  1. Press and hold button 1 of the duplicator, meanwhile press 4 times the 2 button.
  2.  Release both buttons. Now the duplicator RED LED will emit a short flash every 2 seconds.
  3. Place the original remote control next to duplicator around 5cm
  4. Keep pressing the button to be programmed of the original remote control, till the RED LED will switch on as a fix light; now release the button.
  5. The duplicator RED LED will emit a short flash every 2 seconds . This indicates it is necessary to emit the SEED CODE to realize the copy.
  6. To transmit the SEED CODE of the V2 original remote control, please press at the same time 1 and 2 buttons.
  7. Now the duplicator RED LED will change the flash mode (more fast) and color (BLUE), for a reconfirmation of the correct code learning. This step may take some seconds.
  8. At this moment, press the duplicator button when you want to store the code and retain pressed until the duplicator BLUE LED switches off . Repeat the duplicating from Step 1 to the rest buttons.
  9. Activate now RCC the procedure to insert the new remote control on the receiver.

3.3: FAAC 433 – 868
Attention: verify the programming remote control is a MASTER. Pressing whatever button, the LED has to emit a double flash rather than to switch on as a fixed light.

  1. Press and hold button 1 of the duplicator, meanwhile press 4 times the 2 button.
  2. Release both buttons. Now the duplicator RED LED will emit a short flash every 2 seconds.
  3. Place the original remote control next to duplicator around 5cm
  4. Keep pressing the button to be programmed of the original remote control, till the RED LED will switch on as a fix light; now release the button.
  5. The duplicator RED LED will emit a short flash every 2 seconds. This indicates it is necessary to emit the SEED CODE to realize the copy.
  6. Predispose the FAAC/GENIUS remote control for the SEED CODE emission. Press at the same time the 1 and 2 buttons (note: THESE ARE THE BUTTONS OF THE DIAGONAL LINE).
  7. While FAAC/GENIUS remote control LED flashes, place it in front of duplicator at a distance of 5 cm and press the button to be programmed until the duplicator RED LED will change the flash mode (faster) and color (BLUE), for confirmation of the  correct code learning. This step may take few seconds.
  8. At this moment, press the button when you want to store the code and retain pressed until the duplicator BLUE LED switches off. Repeat the duplication procedure from step 1 to the rest buttons.
  9. The copy procedure succeed. Now check on the automation the correct functioning of new duplicator remote control pressing two times the copied button.

IV. Source duplicator to new duplicator duplicating procedures

  1. Press and hold button 1 of the NEW duplicator, meanwhile press 4 times the button 2.
  2. Release both buttons. Now the RED LED of „NEW duplicator” will emit a short flash every 2 seconds.
  3. Place the „SOURCE duplicator” in front of the „NEW duplicator” around 5cm.
  4. Keep pressing the button to be programmed of the „SOURCE duplicator”

IS A FIXED OR ROLLING-SIMPLE CODE
5a wait for a change flash (as a faster flash) of „NEW duplicator” RED LED and a change of its color (BLUE) that confirms the correct learning of code. This operation may take few seconds.
6a While the BLUE LED is flashing, press the button of the „NEW duplicator” where you want to program the code just learnt, and retain pressed until the LED will switch off.
7a The copy procedure succeed. Now check on the automation the correct functioning of NEW duplicator remote control pressing directly the button where the code has been programmed. If it will not work, please proceed with the insertion on the receiver of  the NEW duplicator, through function, if it is present, or through the procedures given by the automation manufacturer.

IS A ROLLING-COMPLEX CODE
5b The duplicator RED LED will emit a short flash every 2 seconds.
This informs the user to duplicate the remote control, it is necessary to emit the SEED CODE to realize the copy.
6b Transmit now the SEED CODE of the “SOURCE duplicator” pressing at the same time 1 and 2 buttons for 3seconds till the switch on of RED LED. While the LED is flashing, (within 10 seconds) pressing and retain pressed the button where you want to  program the SEED CODE.
7b Now the RED LED of the “NEW duplicator” will change the flash (more fast) and color (BLUE) to confirm the correct learning of the code. This step may take some seconds.
8b At this moment, press the NEW duplicator button when you want to store the code and retain pressed until the duplicator BLUE LED, switches off .
9b The copy procedure succeed. Now check on the automation the correct functioning of NEW duplicator remote control pressing directly the button where the code has been programmed. If it will not work, please proceed with the insertion on the receiver of  the NEW duplicator, through the function, if it is present, or through the procedures given by the automation manufacturer.
Notes:

  • If the RED LED flashes only 3 times (of RED color) and switches off, the code has not learnt correctly. Please repeat the operation from the step 1.
  • The duplicator memory is completely re-writable.
  • Remote controls mark with RCS or RCC should be programmed

Note on environmental protection:
After the implementation of the European Directive 2012/19/UE in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals