media-tech MT4095 USB Endoscope or Inspection Camera User Manual

MT4095 USB Endoscope or Inspection Camera
User Manual

MT4095 USB Endoscope or Inspection Camera

• USB inspection camera
• For recording movies and photos in stress-free, hard-to-reach places (e.g. sewage pipes, ventilation ducts, inside machines, engines, etc.)
• Waterproof and dustproof IP67
• Camera diameter 5,5mm
• Resolution: 640×480 points 30k /s
• Viewing angle: 66°
• Front illumination: 6 bright LEDs
• Backlight brightness adjustment
• Cabie length Sm
• Interface: micro USB+ USBA adapter
• Compatibility: Win 8.1/10 32-64bit, Android from v. 6.x Power
• supply: USB SV port
• Working temperature: 0-70 ° C
• Accessories: hook. magnet, mirror

Application

USB ENDOSCOPE is a device for a visual in section, volt-free, hard-to-reach places (such as pipe interiors).
Flexible neck with a camera is waterproof and suitable for use in aqueous liquids (not in acid nor basic acid). The handle itself is not waterproof and can not be exposed to moisture or immersed. Thanks to a flexible cable you can reach inaccessible places. The image displayed on the screen of your mobile device or PC.
USB ENDOSCOPE is not a medical equipment and can not be used on people nor animals.
Using the product for purposes other than described above may lead to damaging the device In addition, improper use may result in a danger such as short circuit, fire, electric shock, injury, etc.
Please read this manual carefully and keep it for future reference.

Operating Elements

1. Magnetic, mirror and hook tip
2. Flexible cable
3. Brightness adjustment for LEDs
4. Cable remote control
5. USB plug
6. Snapshot button
7. Camera with led lights

Set contains:

• lnspection camera
• CD with a PC software
• Magnetic tip
• Mirror tip
• Hook tip
• User manual

Software
lf you want to use the MT4095 with your mo­bile device, download the free OTG VIEW app from the Google PLAY stare or download from Media-tech website.
lf you want to use USB ENDOSCOPE on your PC, install View Play Cap from the attached CD
installation

1. During the initial installation, endoscope can not be connected to the computer.
2. Tum on the computer. Insert the CD into your CD/DVD-ROM. Administrator privileges are required for installation.
3. The installation will start automatically li when you insert the CD. lf it does not happen, you can install the software manually. Double click on the”Setup. exe” file to install.

Starting
Only the camera and the flexible cabin can be immersed. Remote control is not waterproof.
The USB endoscope can only be used for inspection of non-electric devices. The camera head is made of metal and can cause short circuits. For safety reasons, always remove all parts of the unit from the power supply before each inspection.
The minimum bending radius of 60 mm can not be exceeded. Otherwise, you can damage the device.
a) Connecting the endoscope and starting the app

1. Tum on your computer and connect the plug to the USB port.
2. During the first connection computer will point to the new hardware. Follow the Windows instructions to install the drivers for the endoscope.
3. Run “View Play Cap”
4. Go to the “Devices” tab and select “USB2.0 PC camera”. Go to the “Options” tab and activate the “Preview”. The camera image will be displayed.

If you have previously installed another USB camera, you may receive an error message when you start the program. In the “Devices” main menu, select the “USB2.0 PC camera” driver.
b) Setting up camera lighting
By turning the brightness control (3) you can adjust the brightness of the camera:

Brighter LED Dimmer
c) Main menu

File| Set Capture File…| Select where do you want to save video’s (avi). “.avi” must be indicat­ed. Next, please specify file size.
---|---|---
Allocate File Space…| Setting the memo-ry size. Available size will be displayed in the menu bar”Capture File Size” You can specify the size in megabytes (MB)
Save Captured Video…| Saving captured video
Exit| Exit the program
Devices| Endoscope Driver| For this product select “USB2.0 PC camera”
Options| Preview Video Capture Filter…| Enables or disables im­age display eck “d) Picture Set tings”
| Video Capture Filter…| Check”d) Picture Set-tings”
---|---|---
Video Cap- ture Pin| Video format:
Video standard, un­manned,
Image frequency, 30 images/sec non-dis­crete,
Spectrum/compression
Colors (pre-set to RGB 24, do not change),
Output size (preset to 640 x 480,do not change)
Compression: do not change
Capture| Start Capture| Starts video record­ing.To confirm press „OK”, to abort press „Cancel”.
Stop Capture| Stop capture
| Set Frame Rate…| Setting the frequency of images for recording
(Pictures/s).
Leave a setting of 30 images/s.
To confirm press “OK”, to abort press„Cancel”.
---|---|---
Set Time Limit…| Enter the maximum recording time in sec­onds.
We recommend to do not change or activate this setting.
To confirm press “OK”, to abort press„Cancel”.

d) Picture settings

Stream
Property
(To confirm
settings press
“OK” to abort
press “Can cel”)| Image Control:
+ image reflection + image tilt
+ low light output (Brightness)
+ Brightness – Contrast «Gamma (color contrast setting) » Hue
+ Saturation « Sharpness » VGA
+ Snap Size (set the image size, leave setting 640 x 480)
+ Zoom (size setting in %)
---|---
Automatic mode control:
Leave selected settings to  achieve the best image quality
Standard (standard settings):
+ Undo – Save – Restore
Gleam: Screen refresh rate (50 Hz or 60 Hz)
Additional control:
+ Backlight compensation
+ Black/white image mode
Effect Frame
(To confirm settings press “OK” to abort press “Can-cel”)| Effect: deactivating • Oil painting • Horizon- tal curvature • Vertical curl Monitor (monitor screen view)
Frame: Deactivation • flowers • paper (newspaper) • optical viewfinder Snowman
File (F)| Save as„bmp” or„jpg”
---|---
Exit (X)| Exit
Rotate
Orientation| Rotate the image counterclockwise
(0°, 90°, 180°, 270°)
Help (H)| View”help”

You can only use the snapshot function with administrator privileges. Please contact your system administrator.
f) Tips
In order to install the tips (1), carefully open the clamping ring and attach it to the narrow recess beneath the camera. Do not bend ex-cessively during the opening (fracture risk).

• The magnetic tip is used to lift metal ob-jects.
• The mirror tip can extend the field of view of the endoscope in areas inaccessible for the camera.
• The hook tip is used to capture small ob-jects.

Maintenance and cleaning

This product is maintenance-free, except for occasional cleaning. For cleaning use a soft, antistatic, lint-free cloth. Rinse the elastic neck of the endoscope with clean water af-ter each use in liquids and dry it completely before packing. The device can only be immersed in the cleaning liquid to determine the maximum water level. The handle can not be immersed or wetted.

Environmental guidance:
The device is marked with the symbol of a crossed out waste container, in accordance with the European Directive 2012/19/EC on waste electrical and electronic equipment. Products marked with this symbol should not be disposed of or disposed of after the end of their useful life together with other household waste. The user is obliged to dispose of waste electrical and electronic equipment by delivering it to a designated point where such hazardous waste is recycled. The collection of this type of waste in separate places and the proper process of their recovery contribute to the protection of natural resources. Proper recycling of waste electrical and electronic equipment has a beneficial effect on human health and the environment. In order to obtain information on where and how to dispose of waste electrical and electronic equipment in an environmentally safe way, the user should contact the relevant local authority, the waste collection point or the point of sale where he purchased the equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>