LifeBasis Thermal Copy Machine for Tattoo User Manual
- June 15, 2024
- LifeBasis
Table of Contents
LifeBasis Thermal Copy Machine for Tattoo User Manual
Main engine
Operation Panel Introduction
MIRROR: The key shifts between two kinds of function: Mirror
PHOTO: The key shifts between two kinds of resolution: PHOTO and
FINE.When the resolution is PHOTO, the photo light works.
DEEPNESS I: The key is fo set the copied documents by DEEPNESS |. When the DEEPNESS | works, the DEEPNESS Il light goes off.
DEEPNESS I: The key is fo set the copied documents by DEEPNESS
|. When the DEEPNESS | works, the DEEPNESS Il light goes off.
COPY: The key s fo start the copy function.
STOP: The key is to stop the copy function.
POWER : The light indicates that the machine is prepared for working.
ERROR: The light is to show something wrong happened on the Copy and Normal Copy. The default situation is Mirror Copy. When the mirror function starts, the Mirror light works.
START OPERATION
Insert the power plug info an available power outiet. When the machine is in the standby situation, the sound “doo” will be heard. All the parameters items can be set up when the machine is under the standby situation.
TRANSFER PAPER OPERATION
Method of Use 1: Universal Version
Remove the stencil paper (between white paper and blue paper). Keep the yellow
paper on top, blue paper in the middle and white paper at the bottom. Line and
shaded patterns can be transferred. If you want a deeper ransfer pattern,
please choose Deepness 2 mode. (As shown the picture 1)
Method of Use 2: Professional Advanced Version
For Simple Line Patters, remove the stencil paper (between white paper and
blue paper) and yellow paper. Keep the white paper on fop, blue paper at the
bottom Choose Deepness 1 or 2mode to fransfer the pattern. If paper jam,
please place the blue paper on fop, the white paper at the bottom. (As shown
the picture 2)
B. For Shaded Pattems, remove the stencil paper (between white paper and blue paper) . Keep the yellow paper on fop, biue paper in the middle and white paper at the botfom. If you want a deeper transfer pattern, please choose Deepness 2 mode (As shown the picture 1)
COPY
Please set the appropriate parameters before the transfer:
- Please insert the transfer paper according to the above.
- The face of the pattern paper should be inserted downwards into the input. Press the “COPY” button to copy.
- If you want to copy more page, please insert another page before the end of the instruction tone. After copying, the machine will remain in standby mode.
NOTE:
- Because it needs preheating before mirror copying, the print head should be placed along the white part on top of printing paper to avoid a black mark due to the low position of the paper.
- If you want to stop the process during copying, press the “STOP” button.
- When the warning signal sounds and error light is on, please stop copying immediately by pressing the “STOP” button.
PRODUCT SPECIFICATIONS
TYPE | Transfer Machine |
---|---|
SCANNING MODE EFFECTIVE | CIS |
SCANNING WIDTH SCANNING | 210mm |
RESOLUTION HORIZONTAL | 8 dot/mm |
VERTICAL DOCUMENTTYPE | 7.7line/mm |
DOCUMENT SIZE DOCUMENT | FINE/PHOTO A5 ~ A4 |
THICKNESS RECORDING MODE | 0.06mm ~ 0.15mm |
EFFECTIVE PRINTING WIDTH | 210mm |
POWER CONSUMPTION | 10w |
POWER | AC110V ~ 240V 50Hz ~ 60 Hz /0.46A |
WORKING TEMPERATURE | 5C~ 35C |
ENVIRONMENT CONDITION | 20% ~ 80% |
RELATIVE HUMIDITY WEIGHT | 1.67Kg |
CUBAGE | 292 mm(W)X225 mm (D] X84mm(H] |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>