LifeBasis CD-4801 1.4L Ultrasonic Jewelry Cleaner Instruction Manual

LifeBasis CD-4801 1.4L Ultrasonic Jewelry Cleaner Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFEGUARDS
When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following.

WARNING -To reduce the risk of burn, electrocution, fire or injury to persons.

Do not disassemble the unit except for the authorized serviceman

Unplug the unit before filling. Do not exceed the “MAX” mark.

Do not fill the tank with abrasives or corrosive chemicals

Do not immerse the unit in water to reduce the risk of electrocution

Do not touch the socket with wet hand to reduce the risk of electrocution

Use this unit properly as per its instruction manual. Do not use attachments not recommended by the manufacturer

Do not use this unit when sleeping or drowsy

Never operate this unit if cord or plug are damaged. If it is not working properly, or has been dropped into water or damaged, return the damaged unit to a service centre for examination and repair.

This appliance is not intended for used by persons (including children) with redu-ced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person A responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

SAFETY INSTRUCTION: READ ALL INSTRUCTIONS BEFORE USING

DANGER- To reduce the risk of electrocution:

Unplug this unit immediately after using

Keep the unit away from heated surface, and place it in a dry and flat place

Keep the unit in a safe place to avoid falling into water or other liquid.

The unit should never be left unattended when plugged in…

Do not use while bathing

Do not reach for the unit that has fallen into water. Unplug immediately
Do not immerse the unit into water or other liquid,

The product may be off or can’t be switched off when it is subjected to electromagnetic interference like Fast Transients or Surge voltage, but it can recover after being re-plugged in the socket, and then just follow the instruction described in this manual to set the function again for normal operation.
Unplug this product before filling. Fill with water only unless otherwise specified by manufacturer. Do not overfill.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way, if the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
(This is only available for UL cord and plug)

OPERATION INSTRUCTIONS

Open the lid, and fill stainless steel tank with water. Running without water may damage the unit!

Place item into water. The water should merge the item to be cleaned but not exceed “MAX” 2 mark and be less than “MIN” mark.

Put the plug in the socket.

Press SET button to choose working cycle freely. When the unit is electrified, “180” is displayed automatically. It is the most common used working cycle. Every time press “SET”, these optional working cycles from

Press “ON” to start cleaning and the red indication light is on. During cleaning, you can hear the “Zi ZI” voice, it means the unit is working

When reach the time of “000” the unit will auto stop, the red light will turn off. If another cleaning is needed, just repeat the above steps. During cleaning, if you want to stop, just press “OFF” Press “ON” again, the unit will implement the remainder program to continue the cleaning. Furthermore, you can press “SET” to renew working cycle.

When finished cleaning, unplug it and open the lid, then take out the item. At last, pour the water from stainless steel tank and wipe it up.

THREE WAYS OF CLEANING

GENERAL CLEANING
Use just tap water for general cleaning. The water should merge the item to be cleaned but not exceed “MAX” mark and be less than “MIN” mark.

ENHANCED CLEANING
Add about 5-10ml of detergent into the water when the item to be cleaned is smeary or long time not cleaned. It can quicken the speed of seaminess decomposition, and enhance about 30% of cleaning result.

PARTLY CLEANING

For large items, partly cleaning as shown.

Any unfirm inlaid item may become loose. Do not put any easy-discolored item into the tank for cleaning, such as cloth products, leather products, wood ware etc.
Do not put mobile phone or watch which is not waterproof into the tank for cleaning. Do not put any spectacles frame or art ware which is made from shell for hawksbill into the tank for cleaning.

USER MAINTENANCE
Unplug and empty the unit after using. Do not keep water in the tank for a long time.

Wipe the tank and unit with dry towel. Avoid washing the complete unit with water to reduce the risk of electrocution.

AVAILABLE FOR

Jewellery
Necklaces, Rings, Earrings, Bracelets etc.

Glasses and Timepieces

Glasses, Sun Glasses, Watch Chains, Waterproof watches etc.
Commodities

Electric shaver heads, Razor blades, Dentures, Combs, Toothbrushes etc.

Stationery

Pen-heads, Printer-heads, Seals etc

Metal Articles
Watch Parts, Ancient coins, Badges, Valves, Machine nozzles
Dining Appliance

Forks, Knifes, Spoons etc.

Dirt eliminated process through ultrasonic technology

Many tiny bubbles are generated under the action of ultrasonic.

Bubbles are imploded constantly under the action of ultrasonic to impact the surface of the item.

Dirt is split into many granules and separated from the surface of the item, then comes into water

PRODUCT DRAWING & INDICATION

1.  LID
2. VIEW WINDOW
3. STAINLESS STEEL TANK
4.  DIGITAL DISPLAY
5. INDICATION LIGHT
6. “ON” BUTTON
7. “SET” BUTTON
8.  “OFF” BUTTON
9.  PLUG AND CORD
10.  “MAX” MARK
11. “MIN” MARK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>