AMYLIOR A0B LLTRACK Power Wheelchair Instruction Manual
- June 15, 2024
- AMYLIOR
Table of Contents
AMYLIOR A0B LLTRACK Power Wheelchair
Product Information
Specifications
- Product: Replacement Shrouds with Old Color Scheme
- Compatibility: Alltrack power wheelchairs with painted frames and black/gray shrouds (built before December 2020)
- Color: Onyx Black Matte
- Availability: Currently in stock
Introduction
As of October 1st, 2023, replacement shrouds for Alltrack power wheelchairs
with painted frames and black/gray shrouds (built before December 2020) will
be completely Onyx Black Matte instead of Black and Gray. Please refer to the
images below for visual reference.
Visual Impact
- Alltrack power wheelchair built before December 2020 with the old color scheme:
- Replacement shrouds are now completely Onyx Black Matte:
Additional Considerations
Availability and Pricing:
The original Black and Gray shrouds are no longer available. The Onyx Black
Matte shrouds are currently in stock. Replacement part numbers can be found in
the Parts Manual, and pricing can be obtained by requesting a quote (RFQ).
Corresponding updates:
The Parts Manual has been modified and is now available online.
Product Usage Instructions
Replacing the Shroud
- Ensure the power wheelchair is turned off and the batteries are disconnected.
- Locate the screws or fasteners that secure the current shroud in place.
- Using a suitable screwdriver or tool, carefully remove the screws or fasteners.
- Gently lift and remove the old shroud from the power wheelchair.
- Take the new Onyx Black Matte replacement shroud and align it with the corresponding attachment points on the power wheelchair.
- Secure the replacement shroud in place by fastening the screws or fasteners.
- Ensure all screws or fasteners are tightened securely, but do not overtighten.
- Reconnect the batteries and turn on the power wheelchair to test the new shroud.
Ordering Replacement Shrouds
To order replacement shrouds, please refer to the Parts Manual for the
specific part numbers. You can then request a quote (RFQ) to obtain pricing
information. The Onyx Black Matte shrouds are currently in stock.
FAQ (Frequently Asked Questions)
-
Q: Can I still get the original Black and Gray shrouds?
A: No, the original Black and Gray shrouds are no longer available. The replacement shrouds are now completely Onyx Black Matte. -
Q: Where can I find the Parts Manual?
A: The updated Parts Manual is available online. You can access it through our website or contact our customer support for assistance.
INTRODUCTION
As of October 1st, 2023, replacement shrouds for Alltrack power wheelchairs with painted frames and black/gray shrouds (built before December 2020), will be completely Onyx Black Matte instead of Black and Gray. Please see the below images.
VISUAL IMPACT
Alltrack power wheelchair built before December 2020 with the old color scheme.
- ALLTRACK M3 MID-WHEEL DRIVE
- ALLTRACK R3 HYBRID-WHEEL DRIVE
Former shroud color in Black and Gray
Replacement shrouds are now completely Onyx Black Matte
ADDITIONAL CONSIDERATIONS
-
Availability and Pricing
Original Black and Gray shrouds are no longer available, Onyx Black Matte shrouds are currently in stock. Replacement part numbers are available in the Parts Manual and pricing can be obtained by RFQ. -
Corresponding updates
The Parts Manual has been modified and is online.
Contact Information
Phone: 1 450 424-0288 | Fax: 1 450 424-7211 | [email protected] | amylior.com.