AMYLIOR Power Wheelchair Instructions
- June 12, 2024
- AMYLIOR
Table of Contents
AMYLIOR Power Wheelchair
Product Information
The Alltrack power wheelchair now comes with a new LED LightingPackage. This package includes both front and rear lights.
Product Usage Instructions
To use the new LED Lighting Package on your Alltrack power wheelchair, please follow these steps:
- Ensure that the lighting package has been properly installed on your wheelchair. Refer to the Installation Guide for detailed instructions.
- To turn on the front lights, locate the switch or button designated for this purpose. Press or slide the switch/button to the “ON” position.
- To turn on the rear lights, locate the switch or button designated for this purpose. Press or slide the switch/button to the “ON” position.
- Adjust the brightness of the lights, if applicable, using the provided controls or settings.
- To turn off the lights, simply reverse the above steps by switching or pressing the switch/button to the “OFF” position.
For any further assistance or troubleshooting, please refer to the user manual or contact our customer support.
NEW FRONT /REAR LIGHT PACKAGE
INTRODUCTION
Please note that, effective January 9th, 2023, our current light package will change to a New LED Lighting Package. The entire line of Alltrack power wheelchair will now be available with this new option.
CHANGE IN LIGHTING PACKAGE
-
FORMER PACKAGE
-
NEW PACKAGE
- FRONT
-
* REAR 
OTHER IMPLICATIONS
Availability and Pricing
On-chair pricing remains unchanged. Parts pricing requires an RFQ.
Aftermarket installation
If the lighting package is ordered after the chair has been delivered, an
Installation Guide is available on our website under the SUPPORT tab.
Corresponding updates
There is no change to the Order Forms. The Parts Manual has been modified
and is online.
Contact
- Phone: 1 450 424-0288 |
- Fax: 1 450 424-7211 |
- [email protected]
- amylior.com