Sunbeam IMGY22 Heated Bedding Instruction Manual
- June 15, 2024
- Sunbeam
Table of Contents
IMGY22 Heated Bedding
Heated Bedding
12 Heat Settings | 12 Hour Auto Off
Indulge in the cozy softness of Sunbeam® Heated Bedding, wrapping you in warmth throughout the night.
IMPORTANT SAFETY INSTRUCTIONS – DO NOT DESTROY
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons. Misuse or failure to follow these warnings and instructions may cause overheating, fire, personal injury and/or property damage:
- Be sure to read carefully all instructions before using this heated product.
- WARNING: Do not use this heated product with an infant, child, incapacitated or immobile person, paraplegic or quadriplegic, a diabetic, anyone insensitive to heat, such as a person with poor blood circulation, or anyone who cannot clearly understand the instructions and/or operate the controls.
- Do not tuck in, pinch, flex or expose the wired heating area of this heated product.
- Do not route electrical cords between the mattress and box spring. Do not allow the cords to be pinched. Do not use with damaged cords. Damaged cords can lead to overheating or fire.
- Keep the control away from drafty areas that may become damp or wet such as an open window.
- Do not use pins or other metallic means – They may damage the electric wiring.
- Do not use if wet. If a spill occurs, turn heated product off, unplug, and dry before re-using.
- Controller is not waterproof. Do not immerse in water or other liquids.
- Be sure that this heated product is used only on an AC supply circuit of the proper voltage. Do not use with an extension cord. Do not use with generators, power converters or inverters.
- Turn off or unplug this heated product when not in use.
- Excessive heating may result from folding or bunching this heated product while in use.
- Examine the heated product, cord and controller before each use for signs of wear or damage. If improper operation, wear or damage is observed, discontinue its use immediately, unplug it, and contact us at www.sunbeamhome.com
- For throw blankets and back/body pads only: Do not use with rocking chairs, recliners, chairs with casters or wheels, or other furniture subject to movement.
- Do not use this heated product on a waterbed, bunk bed, mechanically adjustable bed or a child’s crib/bed.
- Do not use in conjunction with another electrically heated product.
- Do not tuck in the supply cord or control in a sofa or other furniture. All portions of this heated product should be visible at all times.
- Wrapping of cord around the controller may damage the cord. Loop loosely when storing. Allow to cool before storing and do not crease by placing items on top of it. Store in the original packaging, in a cool, dark, dry place.
- Do not dry clean this heated product. Cleaning solvents may damage the insulation of the heating element. Improper laundering may cause problems with the heating wire, which can lead to fire.
- Keep all dogs, cats and other pets away from this heated product. This is an electrical appliance that they can damage or be injured by.
- Use only the controller included with your heated blanket/mattress pad.
- Do not use this heated product with analgesic creams, liniments, salve or ointment preparations. Skin burns could result.
- Check with your healthcare provider before using with a pacemaker or any medical devices.
- Not for hotel, motel, hospital or other institutional use.
SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY NORTH AMERICAN MODELS WITH
POLARIZED PLUGS:
POLARIZED PLUG This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug is intended
to fit into a polarized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way. If the
plug fits loosely into the AC outlet or if the AC outlet feels warm do not use
that outlet.
OPERATION & CARE INSTRUCTIONS
HEATED BLANKET AND MATTRESS PAD SETUP
When setting up your heated blanket/mattress pad, be sure to follow the steps
below in order.
-
Place the heated blanket/mattress pad on the bed with the label at the foot of the bed facing upward.
-
Connect the cord into the module at the bottom of the heated blanket/ mattress pad until the plastic hinges click into place.
CAUTION: Cord must be COMPLETELY CONNECTED. A risk of fire could result from a loose connection.
-
Run the control cord on the floor under the bed. Do not sandwich cord between the mattress and box spring.
Avoid any tangling or pinching. -
Plug power cord into a 110-120 volt wall outlet.
CAUTION: Do not use with generator power or inverter.
USING YOUR CONTROLLER
- To turn the controller ON, press the “On/Off” button “ ”.
- Turn the dial until the selected temperature is facing the arrow “ ” and lit up.
- To turn the controller OFF, press the “On/Off button “ ”.
CAUTION: ALWAYS turn the heated blanket/mattress pad “OFF” when not in
use.
Note: It is normal for the controller to feel warm to the touch when
functioning properly.
Auto-Off Feature : The “Auto-Off” feature is designed for conservation of
energy by automatically turning your blanket or mattress pad off after 12
hours of continuous use.
Note: After a power outage, the “Auto-Off” feature automatically resets
the timer.
For Dual Controls: Each control operates independently and will turn off 12
hours after the control is turned “On”.
To restart all heated products after a power failure: Press the power button
and the heated product will begin to warm.
CARE AND CLEANING OF YOUR HEATED BEDDING PRODUCT
CAUTION: Do not dry clean. Do not use bleach. Do not use wringer. Do not
iron. Do not immerse control or cord in water or other liquids.
Do not use mothballs or sprays of any kind. Do not reconnect the heated
product until it is completely dry. We recommend washing before initial use.
Before Washing or Storing Your Heated Bedding Product
- Disconnect power cord from wall BEFORE detaching control cord from the heated product.
- Disconnect the controller cord from the connector. Squeeze the connector’s hinges on both sides to unplug easily.
- Ensure that no cords are still connected and none of the wires have worn through the fabric.
- Carefully follow all washing instructions or your heated product may shrink and possibly cause a fire hazard.
Washing and drying instructions
-
Machine wash in cold water, gentle cycle or hand wash.
-
Tumble dry low, delicate cycle. REMOVE WHILE STILL DAMP, gently stretch the blanket/mattress pad back to its original size.
Caution: Do not use commercial dryers or the dryers at your local laundromat. They get too hot and would damage the wiring of the heated product. -
Drape the heated product over a clothesline or clothes rack. DO NOT use clothespins.
-
Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
WARRANTY
Limited Warranty
This 5 Year Limited Warranty is valid for the original purchaser from the
original date of retail purchase against workmanship and defects in material.
Proof of purchase is required to obtain service under this Limited Warranty.
This Limited Warranty extends only to the original purchaser. Warranty does
not cover normal wear of parts or damage from misuse, improper voltage, use
contrary to the instructions, disassembly, or acts of God. Star Elite Inc. may
deny claims of damage caused by misuse or modifications of this product.
Warranty Service
To obtain service under this warranty, please contact our Customer Care
Deparment at 1.877.383.6399 (Monday – Friday, 8:30 am – 5:00 pm EST) or visit
www.sunbeamhome.com
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
FCC CERTIFIED
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
IMPORTANT
CAUTION: Do not plug main power cord into the wall outlet until you have completely set up your heated product per the instructions.
- Disconnect power cord from wall before detaching control from heated product.
- Always make sure cords and controls are NOT trapped or pinched between bed slats, mattress, springs, against wall, foot board or bed frame, or between furniture, walls or chairs.
CAUTION: Do not attempt to force the plug. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit only one way into an outlet. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
© 2023 Sunbeam Products, Inc. All rights reserved.
SUNBEAM® is a registered trademark of Sunbeam Products, Inc. used under
license.
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9.
SE060-050523
For inquiries regarding recycling and proper disposal of this product,
please contact your local waste management facility.
IMGY22-ES
Printed in China