EDIFIER X5 Lite True Wireless In Ear Headphones Instruction Manual

EDIFIER X5 Lite True Wireless In-Ear Headphones

Specification

Features

• CLEAR CALLS
  Dual MICs and AI ENC ensure impeccable voice clarity, reducing surrounding distractions.

• SUPERIOR SOUND
  6mm drivers offer powerful bass & 4 EQ presets (Classic/Pop/Classical/Rock) via the Edifier Connect App.

• IMPRESSIVE BATTERY
  Enjoy 6.5 hours of playtime on the earbuds, plus an extra 19.5 hours from the charging case; a total of 26 hours. A mere 10-minute charge grants you 1 hour of playtime.

• UNBREAKABLE CONNECTION
  Experience non-stop, smooth wireless listening with the latest Bluetooth 5.3 technology. IP55 is certified for your on-the-go activities.

• GAME ON
  Sync seamlessly with a 65ms low latency in game mode and stay ahead of the competition.

Note : Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing

Power ON/OFF

1. Power ON when taken out of the case.
2. Power OFF when placed in the case.

Note:
If there is no Bluetooth connection for 10 minutes after being powered on, the earbuds will power off automatically.

Pairing

1st Pairing

1. Taken out of the case. White and red LEDs will blink alternately.
2. Select “EDIFIER XS Lite’ in the Bluetooth device setting to connect. White LED will blink twice in 5 seconds when successful.

Note:
For subsequent use, the earbuds will automatically connect to the device used last time.

Reset

1. Taken out of the case.
2. Disconnected from any Bluetooth device. Press and hold the touch panel on either earbud for around 8s until the red LED blinks 6 times to clear the Bluetooth pal ring records and power off. If the left and right earbuds are connected, the other side will dear the Bluetooth pairing record and power off too.
3. Placed back in the case and taken out of the case again.
4. Select “EDIFIER XS Lite” in the Bluetooth device setting to connect. White LED will blink twice in S seconds when successfully.

Left and right connection

1. If there Is no Bluetooth connection and TWS connection when earbuds are powered on, tap the touch panel S times on both earbuds until the white LED blinks slowly to enter TWS pairing mode. Once the left and right earbuds are connected successfully, white and red LEDs will blink alternately to enter Bluetooth pairing mode.
2. Select “EDIFIER XS Lite” in the Bluetooth device setting to connect. White LED will blink twice in S seconds when successfully.

Charging

Earbuds

1. When hearing a low battery prompt tone, please place the earbuds in the case for charging.
2. The red LED on the earbud is steadily lit when charging and off when fully charged.

Charging Case

1. Please connect the case to the power source with the included Type-C charging cable for charging.
2. The red LED is steadily lit when charging and off when fully charged.

Note:
Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.

Input : 5V ==200mA (Earbuds)
5V —- 1A (Charging case)

Controls

Note:

1. Images are for illustrative purposes only and may differ from the actual product.
2. Download Ethe difier Connect App for more customizable control settings.

For more information, please visit our website: www.edifier.com

Model : EDF200142

Edifier International Limited P.O. Box 6264 General Post Office Hong Kong www.edifler.com 0 2023 Edifier lntematlonal Limited. All rights reserved.

Printed In China

NOTICE:
For the need for technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown in this manual may be slightly different from the actual product. If any difference is found, the actual product prevails.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>