CoolCenter CF78 Temptech Party Cooler User Manual

Table of Contents

CoolCenter-CF78-Temptech-Party-Cooler-PRODUCT-IMAGE

Specifications

Important Safety Instructions

To obtain full use of the freezer, we recommend reading this instruction manual.
It is the user’s responsibility to operate the appliance in accordance with the instructions given.
Contact your dealer immediately in case of any malfunctions.
Place the freezer in a dry and ventilated place.
Keep the freezer away from strongly heat-emitting sources and do not expose it to direct sunlight.
Always keep in mind that all electrical devices are sources of potential danger.
Do not store inflammable material such as thinner, gasoline, etc. in the cabinet.
No asbestos nor any CFC are used in the construction.
The oil in the compressor does not contain PCB.

Unpacking and Installation

Carefully examine the freezer for shipping damage before discarding the packing material. If any damage is found, contact the delivery carrier immediately and have his agent prepare an inspection report for the purpose of registering a claim. THIS IS YOUR RESPONSIBILITY.

Electrical Connection

The cooler operates on 230V/50Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be observed.
The freezer plug and wall socket should then give correct earthing. If in doubt, contact your local supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-Amp or 3-pin 15Amp plug. If a B.S. 1363 (13-Amp) fused plug is used, it should be fitted with a 13-Amp fuse.
The wires in this mains lead are coloured in accordance with the following code: Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.

Start-up of the Cabinet

Before use, we recommend that the freezer is cleaned, see the section on maintenance and cleaning.
Important! If the freezer has been vertically placed during transport, please wait 2 hours before starting up the cabinet.

Thermostat

Defrosting

Maintenance and Cleaning

Switch the freezer off at the socket. The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet with a light soap solution and subsequently wipe dry.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the surfaces and the internal cooling system.
Do NOT hose the compressor compartment with water as this can cause short circuits and damage on the electrical parts.

Service

Disposal

FAQ:

Q: What should I do if I notice any shipping damage?
A: Contact the delivery carrier immediately and have his agent prepare an inspection report for the purpose of registering a claim.
Q: What should I do if I experience a malfunction?
A: Contact your dealer immediately.
Q: Can I store inflammable material in the cabinet?
A: No, do not store inflammable material such as thinner, gasoline, etc. in the cabinet.

To obtain full use of the freezer, we recommend reading this instruction manual.
It is the user’s responsibility to operate the appliance in accordance with the instructions given.
Contact your dealer immediately in case of any malfunctions.
Place the freezer in a dry and ventilated place.
Keep the freezer away from strongly heat-emitting sources and do not expose it to direct sunlight.
Always keep in mind that all electrical devices are sources of potential danger.
Do not store inflammable material such as thinner, gasoline etc. in the cabinet.
We declare that no asbestos nor any CFC are used in the construction.
The oil in the compressor does not contain PCB.

Carefully examine the freezer for shipping damage before discarding the packing material. If any damage is found, contact the delivery carrier immediately and have his agent prepare an inspection report for the purpose of registering a claim. THIS IS YOUR RESPONSIBILITY.

Electrical connecting

The cooler operates on 230 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be observed. The freezer plug and wall socket should then give correct earthing. If in doubt, contact your local supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-Amp or 3-pin 15-Amp plug. If a B.S. 1363 (13-Amp) fused plug is used, it should be fitted with a 13 Amp fuse.
The wires in this mains lead are coloured in accordance with the following code:
- Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.

Start-up of the cabinet

Before use, we recommend that the freezer is cleaned, see the section on maintenance and cleaning.
Important !
If the freezer has been vertically placed during transport, please wait 2 hours before starting up the cabinet.

The thermostat is placed under the cabinet.
The thermostat can be positioned from app. -22 to -14 ºC.
A positioning in app. the middle of the scale will in must cases be ideal.
Turn the thermostat clockwise if the temperature is too high or anti-clockwise if the temperature is too low.

Defrosting

Switch the freezer off at the socket.
The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet with a light soap solution and subsequently wipe dry.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the surfaces and the internal cooling system.
Do NOT hose the compressor compartment with water as this can cause short circuits and damage on the electrical parts.

Service

The cooling system is a hermetically sealed system and does not require supervision, only cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the freezer, please contact your supplier. Please inform model and serial number of the cabinet. You can find this information on the
rating label which is placed inside the cabinet in the top right hand side.

Disposal