SereneLife SLFTMSG45 Foot Massager User Manual
- June 15, 2024
- serenelife
Table of Contents
SereneLife SLFTMSG45 Foot Massager
PLEASE READ ALL INSTRUCTIONS AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE..
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING AN ELECTRICAL APPLIANCE, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED. READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
- This appliance should never be left unattended when plugged in. Unplug from th outlet when not in use, and before putting on or taking off parts.
- Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to people.
- Close supervision is necessary when this appliance is used near children or disabled persons.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
- Do not carry this appliance by the supply cord or use the cord as a handle.
- Keep the cord away from heated surfaces.
- Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- People who are heat-sensitive should pay attention when the surface of the unit becomes hot.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
IF YOU HAVE A MEDICAL CONDITION LIKE DIABETES, SUFFER FROM BLOOD CLOTS, RECENTLY HAD SURGERY, AND/OR ARE PREGNANT, CONSULT YOUR DOCTOR BEFORE USING THE UNIT
- Do not use the massager for any purpose other than massage.
- KEEP OUT OF CHILDREN’S REACH.
- Do not use the massager if some parts are missing.
- Do not insert any metal objects inside the massager.
- This may result in electric shock.
- Do not stand inside the unit or apply excessive pressure to the massager. This may significantly slow down or stop the motor, causing the unit to overheat.
- Do not fall asleep using the massager.
- Do not cover the massager during operation; this may result in overheating of the unit.
- Do not unplug the massager from the electrical outlet during operation. This may result in injury.
- Due to the risk of electric shock do not place wet legs and feet inside the unit.
- Do not use the massager in the bathroom where you might come in contact with water.
- Prior to use make sure that your voltage corresponds with the voltage of the massager.
- Do not pull on the power cord when disconnecting from the electrical outlet. Hold the plug and unplug it properly from the outlet.
- Due to the risk of electric shock, do not handle the plug and cord with wet hands.
- Do not wrap the cord around the unit. This may damage the cord and result in electric shock or fire.
- Do not place the power cord under the massager or any heavy object.
- Do not operate a massager with a damaged cord, do not try to fix it yourself, contact a licensed electrician.
- If you experience any discomfort while using the massager, press the “Power OFF” button to turn the unit OFF.
- Some users may experience itching of feet during and after the massage. This happens as a result of improved blood circulation and is OK.
REMOTE CONTROL
USAGE
- Connect the provided adaptor to the massager, and then plug it into the wall outlet.
- Choose a comfortable chair of equal height. Place your legs into the slots and relax.
- Press the Power Button to turn the massager on. The unit will beep one time and the LCD will display “15” and then will begin the countdown.
- The massager will start operating automatically.
- There are a total of 3 levels (P1-P3). The default setting is level 2 with Heat (the Massage Mode button will remain BLUE during operation, the buttons will be flashing and the Heat will stay on).
- If desired, press the button to move to level 3 (will flash RED) and the LCD panel will briefly display P3.
- During the massage, feel free to change levels according to your comfort level.
- To increase the level, press the button.
- To lower the level, press the button.
- The LCD panel will briefly display the selected level.
- You will feel the air pressure increasing and then releasing during the duration of the massage. For optimal massage experience, you will feel the change of direction and type of massage. If you feel that a certain level is too high or too low, use the buttons to adjust the level. Refer to point 5 on the previous page. There are 3 modes of massage programs, the difference of each mode is as follows, and the default setting is mode 1
- Mode 1: Air pressure and rolling function work at regular motion and speed, and the button with blue light.
- Mode 2: Air pressure works the same as mode 1 rolling function works rhythmically, and the button with red light.
- Mode 3: Only air pressure work, rolling function stop. And button with alternate blue and red lights.
- To adjust the vibration speed, press the speed button the vibration speed can change from high to low.
- To turn the heat off, press the heat mode button the red light will be off indicating the heat function is OFF.
- To turn OFF the unit at any time, just press the power button. The next time you turn it back ON, it will go back to the default setting Level 2. (P2) -15 minutes.
- Unplug the unit when done using the massager.
CARE AND STORAGE
- Before cleaning, always make sure to turn off the unit from the control panel and then unplug it from the electrical outlet.
- Do not use any abrasive cleaners when cleaning the unit.
- Use a dry cloth when cleaning the massager. Never use a damp cloth to clean the control panel and massager unit.
- When not in use for long periods of time, store the massager in a dust and moisture free environment with the cord coiled. Do not wrap the cord around the unit.
- Do not leave the unit under direct sunlight for extended periods of time.
- Do not store the massager unit near the heat source.
- If the massager unit malfunctions or breaks down, never try to repair it yourself, consult a licensed electrician.
| SLFTMSG25 | Penetrating Feet Roller Mode |
|---|---|
| SLFTMSG35 | Shiatsu Pressure Therapy Mode |
| SLFTMSG45 | Vibration Pressure Therapy Mode |
FEATURES
- Full Foot Therapy from Heel to Toe to Ankle
- Simply Slide in Your Feet for Soothing Comfort
- Air Pressure Deep Kneading for Tension Relief
- Increase Blood Flow & Circulation
- Relaxes and relieves Muscle Pain
- Button-Activated Heat Function
- Easy Plug-in Design with Hassle-free Operation
- Adjustable Massage Intensity Levels
- Selectable Speed Settings
- Digital Touch Buttons with LCD Display
- Safety & Power Saving Auto Turn-Off
- Removable & Washable Foot Covers
- Height Adjustable Base
WHAT’S IN THE BOX
- Foot Massager
- (2) Removable Slip-in Foot Covers
- Remote Control
- Power Cable
TECHNICAL SPECS
- High-Powered Massage Motors: 60 Watt
- Automatic Turn-Off: 15 minutes
- Power Cable Length: 7.5 ft.
- Power: 110-240V
- Dimensions (L x W x H): 17.7’’ x 15.7’’ x 11.0’’ -inches
- Sold as: 1
FREQUENTLY ASKED QUESTIONS
What is the brand of the foot massager described in the information?
The foot massager is from the brand SereneLife.
What special feature does the SereneLife SLFTMSG45 Foot Massager have?
The SereneLife SLFTMSG45 Foot Massager is equipped with a Heat function.
What are the product dimensions of the SereneLife SLFTMSG45 Foot Massager?
The product dimensions of the SereneLife SLFTMSG45 Foot Massager are 11.03 x 15.75 x 17.72 inches.
How much does the SereneLife SLFTMSG45 Foot Massager weigh?
The SereneLife SLFTMSG45 Foot Massager weighs 14.33 pounds.
What is the item model number for the SereneLife SLFTMSG45 Foot Massager?
The item model number for the SereneLife SLFTMSG45 Foot Massager is SLFTMSG45.
What is the recommended use for the SereneLife SLFTMSG45 Foot Massager?
The recommended use for the SereneLife SLFTMSG45 Foot Massager is for Feet.
What is the power source of the SereneLife SLFTMSG45 Foot Massager?
The power source of the SereneLife SLFTMSG45 Foot Massager is Corded Electric.
How much does the SereneLife SLFTMSG45 Foot Massager weigh (alternative phrasing)?
The SereneLife SLFTMSG45 Foot Massager has a weight of 14.3 pounds.
What function does the heat feature of the SereneLife SLFTMSG45 Foot Massager serve?
The heat function helps relax muscles completely and is beneficial for persisting pain or after a day in the cold.
What type of kneading does the SereneLife SLFTMSG45 Foot Massager offer?
The SereneLife SLFTMSG45 Foot Massager offers air pressure deep kneading.
How does the air pressure deep kneading benefit the user?
It increases blood flow for perfect circulation and pain relief, soothing the feet from the ankles to the toes.
What is the maximum shoe size that the SereneLife SLFTMSG45 Foot Massager accommodates?
The SereneLife foot massager is suitable for those with shoe sizes of up to 13.
What feature allows easy selection of heat and vibration functions on the SereneLife SLFTMSG45 Foot Massager?
The foot massager features digital touch buttons for easy selection of heat and vibration functions.
How can the user adjust the level of intensity and speed on the SereneLife SLFTMSG45 Foot Massager?
The user can adjust the level of intensity and speed according to their needs using the digital touch buttons.
Is there a convenient accessory included with the SereneLife SLFTMSG45 Foot Massager?
Yes, it comes with a remote control for added convenience.
DOWNLOAD THE PDF LINK:SereneLife SLFTMSG45 Foot Massager User Manual