ULTIMA COSA UC-SM001 Presto Frizzante Soda Maker Instruction Manual
- June 9, 2024
- ULTIMA COSA
Table of Contents
ULTIMA COSA UC-SM001 Presto Frizzante Soda Maker
Please read this booklet thoroughly before using and save it for future reference.
IMPORTANT SAFEGUARDS
-
It is strictly prohibited to use and store this product at high temperature. Please note that the operation and storage temperature of this product is between 4 °C ~40 °C!
-
It is prohibited to transform or disassembly the product by an unauthorized party.
-
Inflating the PET bottle which has no water is strictly prohibited.
-
Do not mix syrup,juice or alcohol with solid particles, or liquid with high thickness and corrosiveness. Thick liquid can create plenty of bubble when injecting; bubble will easily spray out during pressure relief.
-
When hearing the whistle sound, it means it reach the max pressure in the bottle; please do not continue to press or gas will be wasted.
-
Wipe with a damp cloth and use some mild detergent if necessary.
Do not use any solvent or abrasive detergent which may corrode the surface of Soda Machine. -
This plastic bottle could not be put into dishwasher to wash. Use water (no more than 40 °C) and mild detergent. Carefully wash the bottle regularly.
-
If you are not going to use the bottle in short term, please keep the cap open to keep the interior dry completely. The ambient temperature for the bottle must be no more than 40 °C.
-
When the PET bottle is deformed, scratched, discolored or overdue, please do not use it and change for another new bottle.
-
If the temperature of gas cylinder is lower than room temperature, please warm it up to the room temperature slowly. However, do not accelerate temperature by any heat source.
-
If the temperature of gas cylinder is higher than room temperature, please cool it down to the room temperature slowly. However, do not put it into the refrigerator.
-
If the gas cylinder is frozen, please do not touch it, or because there is the risk of cold injury.
SPECIFICATIONS
- Model: UC-SM0Ol
- Colour: Black
- Max Capacity: 800ml
- Temperature : 4°C ~40°C
- Product Dimension : 428 x 201 x 124mm
PACKAGE CONTENTS
- l x Presto Frizzante Soda Maker
- l x BPA-Free Water Bottle
- l x User Manual
- l x Quick Start Guide
- l x Soda Maker CO2 Cylinder
PART DESCRIPTION
- Press Key
- Cylinder Connector
- Main Body
- Magnetic Stand
- Hidden Stand
- Infuser Cap
- 1st Gas Slow Relief Mark
- 2nd Gas Fast Relief Mark
- Injection Tu be
- BPA-Free Water Bottle
- Soda Maker CO2 Cylinder
INSTRUCTIONS
- Remove the dust-proof cap from the cylinder, unscrew the cylinder connector from the body; hold the cylinder connector in one hand, and with another hand, screw the cylinder clockwise into the cylinder connector until fastened.
- Aim the cylinder connector to the right position with the main body, then turn clockwise to fasten the cylinder connector and the main body.
- Put drinking water into the PET bottle up to the “room” mark, then fasten the bottle cap and put the bottle onto the magnetic stand.
- Press down on the carbonation key to carbonate the liquid for best results press the carbonating key 2-3 times at l-2seconds duration each time Stop when you hear a whistling sound. This means the pressure relief valves letting gas out and the bottle has reached its max.
- When gas injection finishes, the bottle can be easily taken out upwards; shake the bottle up-and-down for 3-5 times for a better bubbling taste.
- Pressure relief can be done at variable speed by simple steps ofl. watch, 2. spin and 3. confirm.
REMARK
- Water or other mixed drinks put in the PET bottle should be at between ° 4 C-40 °C.
- Syrup or juice can be added into the bottle to make flavored soda drinks; but the Syrup or juice can be added into the bottle to make flavored soda drinks; but the sugar or impurity blocking or corroding the plastic parts. Soak the cap into water at ambient temperature between 20 °c- 30 °C for at least 3 minutes. The cap must be covered completely by water (or pure soda water for a better result). Dry the cap after soaking.
- Do not mix syrup.juice or alcohol with solid particles, or liquid with high thickness and corrosiveness. Thick liquid can create plenty of bubble when injecting; bubble will easily spray out during pressure relief.
- As it is an open-press structure, when gas is full during injection, the press key may bounce back; it is normal to have some gas release from the press key when the bottle is full, and it also means you can stop pressing.
- When hearing the whistle sound, it means it reach the max pressure in the bottle; please do not continue to press or gas will be wasted.
- When injecting, if there is no gas blowing out from the tube or the water blow can’t reach the bottom of the bottle, it may mean the gas cylinder is running out of gas and
ATTENTION
- Remark : If you use the ice water, the bubble taste of the drink will be better. For that reason, we suggest you put the bottle filled with drinking water in the refrigerator for pre-cooling all the time.
- Notice : This product is limited to the scope of usage specified in this manual only.
- Warning : It is strictly prohibited to use and store this product at high temperature. Please note that the operation and storage temperature of this product is between 4 °C -40 °C!
- Warning : Only use carbon dioxide cylinders from our company, otherwise it will cause risk of air leakage and cold injury.
Warning : It is prohibited to transform or disassembly the product by an
unauthorized party.
If maintenance is needed, please contact our after-sale service, and our
professional technicians will be able to help.
Warning : Inflating the PET bottle which has no water is strictly
prohibited.
DISCLAIMER
- Failure to operate in accordance with this instruction, or loss caused by malicious operation.
- The loss of product consumables meeting the requirements and specifications in this instruction manual.
HOW TO CLEAN
Ultima Cosa Presto Frizzante Soda Maker
Wipe with a damp cloth and use some mild detergent if necessary.
Do not use any solvent or abrasive detergent which may corrode the surface of
the Soda Machine.
Bottle and cap
- This plastic bottle could not be put into the dishwasher to wash.
- Use water (no more than 40 °C) and mild detergent.
- Carefully wash the bottle regularly.
- If you are not going to use the bottle in short term, please keep the cap open to keep the interior dry completely. The ambient temperature for the bottle must be no more than 40 °C.
- It is suggested to wash the bottle interior with clean water and dry up each time after use.
SAFETY INSTRUCTIONS
- Please check the Soda Maker and its accessories (carbon dioxide cylinder, PET bottle etc.). If you find any damage and defect, please contact our customer service or your local distributors.
- Please do not use the product and the related accessories if the damage and defect has not been repaired.
- Please do not adjust or repair this product or its accessories on your own. The repair must only be done by service personnel under our full authorization.
- Only use the original accessories provided or recommended by the manufacturer, or the committed warranty will be invalid.
USE OF THE SODA MAKER
- Presto Frizzante Soda Maker is specially designed for producing carbon dioxide soda beverages.
- Please do not put the device near the heat source (such as a stove, water heater etc.].
- Keep out of direct sunlight.
- Please do not deliver Soda Maker with the cylinder tightened onto the machine. The Soda Maker and cylinder must be delivered separately.
USE OF THE BOTTLE AND THE CYLINDER
- For your safety, this product could only use PET bottles of the Ultima Cosa brand. Using plastic bottles of other brands may cost danger and lead to the failure of product warranty.
- When the PET bottle is deformed, scratched, discolored, or overdue, please do not use it and change for another new bottle.
- If the temperature of the gas cylinder is lower than room temperature, please warm it up to the room temperature slowly. However, do not accelerate temperature by any heat source.
- If the temperature of the gas cylinder is higher than room temperature, please cool it down to the room temperature slowly. However, do not put it into the refrigerator.
- If the gas cylinder is frozen, please do not touch it, or because there is the risk of cold injury.
- Black rubber ring failed of during you screw cylinder, please assembly it follows below steps.
- Black rubber ring lifecycle isl year.
ENVIRONMENT-FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working
electrical equipment to an appropriate waste disposal center.
Share what you make with the world. when you posted on social media. Enjoy our Loyalty Program Take 10% Off Your Next Purchase with Code: Discover More Ultima Cosa Products