SoFlow SO ONE Foldable German Road Instruction Manual

SoFlow SO ONE / SO ONE+
Genuine operating instruction Instruction for models
SO ONE / SO ONE+
Version 1.1.1 2023-07-31
Info@soflow.com
www.soflow.com

Getting started

1.1. What’s in the box
This package contains:

• 1x SO ONE / SO ONE+ Scooter
• 1x Battery charging device
• 1x Extension valve
• 1x User manual
• Set of tools
• 1x Gift card

If one of the items is missing, please contact your authorised supplier immediately.
We recommend keeping your packaging for the length of warranty.

**** We have designed the packaging to be completely recyclable.
After this date, please recycle it responsibly.
Keep a hold of your box for the duration of your e-scooters warranty.

1.2. Setting up your new Scooter
Your new SoFlow scooter has been thoroughly checked and part-assembled by our technicians.
It’s almost ready to ride – just follow these simple set-up instructions and you’ll be ready to go!

https://qrco.de/bdHk9e
Watch the SOFLOW video on setting up your e-scooter.

1. Raise the stem
   Remove the protective packaging but do not lift the scooter out of the cardboard frame just yet. Lift the stem until it clips upright into the frame.

2. Secure the latch
   Pull down the latch mechanism until it clips securely.
   Warning!
   Do not ride the scooter if the latch is loose.

3. Assemble the handle bar
   Connect the cables between handlebar and frontbar.
   Place the console into the top of the stem.
   Make sure that the contact poles between the handlebar and the frontbar are well interlocked.
   Once the console is attached, use the Allen wrench to tighten all four screws.

4. Charge the battery
   You can charge your e-scooter by plugging the charging cable into the charging port.
   Once fully charged the charger light will change from red to green.

5. Check the tire pressure
   Make sure both tires are inflated with the pressure as recommended as follow: Driver weight| Tire pressure
   ---|---
   60-75kg| 3,5bar
   75-90kg| 3,7bar
   90-110kg| 4,0bar
   110-120kg| 4,3bar

How to fold your scooter

1. Unlock the safety lock
   Before folding the SO ONE / ONE+, make sure that it is powered off. Hold the front bar, while you pull up the safety latch.

2. Fold the stem
   Push and hold the safety button to fold the stem towards the rear end fender.

3. Lock the handle bar
   Proceed to fold down and fix it to the rear end of the foot rest and until the folding hook is hooked in into the rear buckle.

How to use your E-scooter safely

2.1. Riding instructions

1. First, turn on your e-scooter by pressing and holding the power button for 2 seconds. The display will switch on.
2. To start riding, lift up the kickstand, place one foot on the footpad and push against the floor with your other foot to propel you forwards.
3. After you’ve pushed yourself forwards, press the throttle with your thumb steadily to start accelerating. You will need to achieve a speed of 3km/h before the throttle will engage.
4. Steer by turning the handlebars left and right. The steering mechanism is sprung-loaded to help it return to centre, and to make it easier to steer during prolonged use.
5. You can slow down the e-scooter by pulling the brake lever. Braking activates both the electrical rear brake and the front drum brake.
6. To come to a stop, slow to almost a standstill. Then, place one foot on the ground, leaning slightly onto that foot as you come to a complete stop.

2.2. Handle bar controls

SOFLOW SO ONE

SOFLOW SO ONE+

2.3. Display

2.4. Quick tips to get going

1. The controls
   Use your right thumb to operate the throttle and your left hand for the brake and indicators.

2. Select mode
   Switch on and double press the power button twice to select your riding mode on the display.
   Press quickly the power button to turn on/off the lights (Modell SO ONE).

3. Push to start
   Simply push off the ground, then press the throttle to activate the motor.

2.5. SOFLOW APP
You can connect to your Bluetooth-enabled SOFLOW ONE / ONE+ using the app for iOS and Android devices. This enables you to use your smartphone as a dashboard that displays speed, battery level and predicted range, among other metrics.

https://qrco.de/bbVUIE

1. Scan the QR code and install the SOFLOW APP.
2. Register / Log-in.
3. Power on your Scooter and connect.

1. Choose the scooter menu bar below.
2. Search vehicles and your scooter should appear.

Follow the instructions shown on the APP. ![SoFlow SO ONE Foldable German Road

• SOFLOW APP 3](https://manuals.plus/wp-content/uploads/2023/12/SoFlow-SO-ONE- Foldable-German-Road-SOFLOW-APP-3.jpg)Once successfully connceted you can see the dashboard and other useful information. The scooter can be also locked by swiping the lock function.

2.6. Usage of “Find My” APP for SO ONE / SO ONE+
Users of an Iphone are able to connect the scooter with the “Find my” function to track the location of the scooter.

• The following steps show the instruction for the model SO ONE.
  For the SO ONE+ please see the instruction on the next page.

• Important, for all steps below the scooter screen must be on.

Setup your scooter / Add scooter

1. Open the “Find My” APP
2. Keep the SO ONE near your Iphone, then tap on + and “add other item”
3. Press the power button on the scooter for 1 sec. to power on the scooter
4. Quickly press the power button 7 times to hear one buzzer signal.
5. “SO ONE” will pop up on the Iphone screen, then tap “connect”.
6. Enter a name and choose an Emoji, then tap continue.
7. Tap “Register item to your Apple ID”, then continue again.8. Tap “Done” to complete the setup

Learn More – Serial number lookup
Quickly press the power button 6 times to hear one buzzer tone.
How to Disable
Quickly press the power button 8 times to hear one buzzer tone.
Factory Reset
Hold the brake lever and quickly press the power button 7 times to hear one buzzer tone. Then to release them.
How to exit «Disable» state
Quickly press the power button 7 times to hear one buzzer tone.
How to switch between «Nearby», «Separated» and «Disconnect»
Nearby
Connection Status Disconnected.
Separated
Nearby status timeout:
Reboot (The battery of this device cannot be removed. Reboot is not supported).
Disconnect
Turn off the Bluetooth on your iPhone.

The following steps show the instruction for the model SO ONE+.
Important, for all steps below the scooter screen must be on.

Setup your scooter / Add scooter

1. Open the “Find My” APP
2. Keep the SO ONE+ near your Iphone, then tap on + and “add other item”
3. Press the power button on the scooter for 1 sec. to power on the scooter
4. Press the left turning button for 5 seconds until you hear a signal tone.
5. “SO ONE+” will pop up on the Iphone screen, then tap “connect”.
6. Enter a name and choose an Emoji, then tap continue.
7. Tap “Register item to your Apple ID”, then continue again.
8. Tap “Done” to complete the setup

Learn More – Serial number lookup
Press and hold the right turning button and brake lever for 5 seconds until you hear a signal tone, afterwards release both.
How to Disable
Press and hold the right turning button 5 seconds until you hear a signal tone, afterwards release the right turning button.
Factory Reset
Press and hold the left turning button and brake lever for 5 seconds until you hear a signal tone, afterwards release both.
How to exit «Disable» state
Press and hold the left turning button 5 seconds until you hear a signal tone, afterwards release the turning button.
How to switch between «Nearby», «Separated» and «Disconnect»
Nearby
Connection Status Disconnected.
Separated
Nearby status timeout:
Reboot (The battery of this device cannot be removed. Reboot is not supported).
Disconnect
Turn off the Bluetooth on your iPhone.

2.7. Essential care tips & advice

| 1. Keep your tyres inflated
Get fewer punctures and better e-scooter performance.
---|---
| 2. Look after your battery
Charge your e-scooter fully at least once a mo
| 3. Ride safely & responsibly
Wear a helmet, use lights, indicators and respect local laws.
| 4. Regular maintenance
Maintaining your SOFLOW Electric e-scooter regularly, (following the steps in this user manual) helps reduce the risk of issues that would affect your e-scooters performance.

Technical data

x 49.5cm
Dimensions folded height/length/width| 51cm x 116cm x 47.5cm| 51cm x 116cm x 49.5cm
Transport box size height/length/width| 56cm x 117cm x 19.5cm
Net Weight| 17 kg
Max. Load| 120kg
Battery| Lithium battery
Battery capacity| 249.6Wh| 374.4Wh
Voltage| 48 V
Charging time| 3.5 hours
Max. Speed (DE version)| 22km/h| 22km/h
Max. Speed (WO version)| 25km/h| 25km/h
Max. Range| 30km| 40km
Max. inclination| 15%| 20%
Motor type| Direct Drive Motor
Motor Nominal / Max. power| 350W / 720W| 500W / 1000W
Motor max. torque| 18Nm| 24Nm
Protection class| IPX5
Website / Tutorial Videos| SoFlow Scooter APP
---|---
https://qrco.de/bdHk9e| https://qrco.de/bbVUIE

Please visit the SOFLOW website to find the Manuals for all SOFLOW products in different languages.

SoFlow AG
Bionstrasse 4
9015 St. Gallen
Switzerland
EU Vertretung:
SoFlow B.V.
Joop Geesinkweg 901
1114 AB Amsterdam-Duivendrecht
NETHERLANDS
Info@soflow.com /www.soflow.com
copyright by www.soflow.com

References

• SoFlow SO ONE PRO - SoFlow

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>