Leader 502594.1 Double Decker Bamboo Bread Bin Instruction Manual

Leader 502594.1 Double Decker Bamboo Bread Bin

Product Information

Specifications

• Hardware
  • A: 2PCS
  • B: 12PCS
  • C: 2PCS
• Main parts:
  • D: Bottom Board
  • E: Middle Board
  • F: Back Board
  • G: Left Board
  • H: Right Board
  • I: Top Board

Product Usage Instructions

1. Step 1: Assembling the Bottom and Left Boards

2. Vertically place the G Left board and fix the D Bottom Board by using B screws. Double confirm the direction of G Left board is correct as the image shows.

3. Step 2: Fixing the Middle Board

4. Fix the E Middle Board by using B screws.

5. Step 3: Inserting the Back Board

6. Insert F Back Board.

7. Step 4: Fixing the Right Board

8. Fix the H Right Board by using B screws.

9. Step 5: Fixing the Top Board

10. Fix the I Top Board by using B screws.

11. Step 6: Installing the Knobs

12. Install C knobs by A screws on both doors and remove the protective film on the doors.

13. Remove the Protective Film On the Acrylic Panels Surface Carefully. Sometimes, the protective film may be a bit difficult to remove. In this case, please use use tweezer to get a small hole or pull the film residues, then manually peel off or use scissors to cut off the remainder.

Frequently Asked Questions:

1. Q: After assembly, the doors are not lined up or have gaps between boards. How could I solve it?
   A: For misalignment, please follow these steps:

2. Please loosen the B screws on Left and Right Boards.

3. Manually lift the D Bottom Board to line up the doors.

4. Reassemble the B screws.

5. Leader 502594.1 Double Decker Bamboo Bread Bin
   A: We recommend adding a small bag or protective film to the bread before storing them in our bread box. Keeping bread fresh requires a careful balance between airflow and humidity. You need to hold the moisture to prevent staleness, but if you stop ALL airflow, mold will grow much faster. Bread boxes are supposed to be a little less than airtight.

6. Q: I’m missing hardware/knobs/screws or my product is defective (broken board, etc.). How can I resolve this situation?
   A: We apologize for the inconvenience. For any missing parts, damages, or warranty issues, please go to your order detail page to find your order information. There will be a place for you to initiate contact with us. We are here and willing to help! Remember to check your spam mails so that you won’t miss our message.

Assembly Instruction

Please DO NOT overtighten the screw before fully assembled

Parts and Hardware Lists

Please note that the screws may have some extra pieces.

Main parts

If you have parts missing/damaged, please go to your order detail page to initiate the contact to us, we could get the hardware/parts replaced for you.

Please kindly keep this manual.
You may encounter some problem while assembling or using our bread box, please refer to the last section – Frequently Asked Questions for further information.

1. Step 1：

2. Vertically place the G Left board and fix the D Bottom Board by using  B screws.

3. Double confirm the direction of G Left board is correct as the image shows.

4. Double confirm the D Bottom Board is correct, and the direction of the groove is upward

5. Step 2：
   Fix the E Middle Board by using B screws.

6. Step 3：

7. Step 4：
   Fix the H Right Board by using B screws.

8. Step 5：
   Fix the I Top Board by using  B screws.

9. Step 6：
   Install C knobs by A screws on both doors and remove the protective film  on the doors.

Sometimes, the protective film may be a bit difficult to remove. In this case, please use use tweezer to get a small whole or pull the film residues, then manually peel off or use scissor to cut off the remainder.

Frequently Asked Questions

1. Q: After assembly, the doors are not lined up or has gaps between boards. How could I solve it?
   A: For the misalignment, please have a try on the following procedure:

2. Please loose the B screws on Left and Right Boards and,

3. manually lift the D Bottom Board to line up the door and,

4. re-assemble the B screws

5. Q: My bread go stale! How shall I do?
   A: We recommend you add small bag or protective film on the bread before storing them into our bread box. Keeping bread fresh requires a careful balance between airflow and humidity. You need to hold the moisture to prevent staleness, but if you stop ALL airflow, mold will grow much faster. Bread boxes are supposed to be a little less than air tight.

6. 3. Q: I’m missing the hardware/knobs/screws or my product is defective (broken board, etc.). How could I reconcile this situation?
   A: We apologize for the inconvenience. For any missing parts, damages or warranty, please go to your order detail page to find your order information. There will be a place for you to initiate the contact to us. We are here and willing to help! Remember to check your spam mails so that you won’t miss our message.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>