Hyundai Mr.Scan Mobile WiFi Scanner User Manual

Hyundai Mr.Scan Mobile WiFi Scanner User Manual

Key features

• Colour & mono scan selection
• 300/600/900 dpi scan resolution
• Directly save files in JPG or PDF format to the microSD card
• Supports microSD/microSDHC cards up to 32GB
• Transfer files via a Wi-Fi connection
• Driver-free for Windows XP, Windows Vista, Windows 7 and
• Mac OS 10.4 or above
• (Directly plug-in, driver installation not required)

Functional parts

| Part| Function
---|---|---
1| Battery cover| Open to store 2x AA alkaline batteries

2

|

Power/Scan

| Power On/ Off: Press and hold this key for 2 seconds to turn power on or off. When the scanner is on, press this button to

start scanning, press this button again to stop

3| Format button| Format the microSD card will delete all data from memory card

4

|

Color/Mono

| Select Color/Mono scan option

Color/Mono mode icon will be displayed on status LCD

5| LCD screen| Scanning status display
6| Error LED indicator| Indicates scan error or over speed
7| WIFI LED indicator| Indicates Wi-Fi status
8| Scan LED indicator| Shows the scanning status; ready for scan
9| Wi-Fi switch| Slide to turn Wi-Fi on/off

10

|

DPI

| Scan resolution setting for High(900dpi) / Medium(600dpi) / Low(300dpi); High/Medium/Low resolution mode icon will be

displayed on status LCD

11

|

JPG/PDF

| Select scan file format with JPG/PDF button, JPG/PDF mode

icon will be displayed on status LCD

12| Time set| Press this button to enter Time and Date setting mode

13

|

USB interface

| Connect to a computer via USB cable provided to view

and transfer files

14| microSD card slot| microSD card storage location

Explanation of the status icons

LED light indications

Using the scanner

Installing the battery

1. Open the battery cover by sliding the battery compartment downwards then lift it as indicated by the arrow in the diagram below.
2. Insert 2x AA alkaline batteries into the battery compartment.
3. Turn on the scanner by pressing the [POWER] button for 2 seconds.

Inserting a microSD memory card (not included)
To operate the scanner, you must insert a microSD card (not supplied) to record and store your pictures. Insert the microSD memory card:

1. Turn ON the scanner.

2. Insert the microSD card into the microSD card slot (with the metal side facing up).

3. Gently press in until the card is latched and clicked into place.

4. The SD card indicator must appear on the LCD screen.
   Note: Do not force the card into the slot; forcing may damage the scanner and the MicroSD card.

5. Align the microSD card position (as marked) and try again.

Time and Date setting

1. Press the [TIME SET] button once to enter time setting mode by using a thin, blunt object, such as the end of a paperclip to access the button.
2. The LCD status display screen will show “1 ##” (step 1) for the year. “##” is a set of numbers that would be changed to correspond to the actual time/date setting. The numbers 1-5 in front of “##” indicate each step in the settings.
3. Press the [JPG/PDF] or [DPI] button to select the current Year.
4. Press the [SCAN] button once to confirm the setting.
5. Repeat steps 2 and 3 to continue the Time and Date setting process
6. After setting the Minute, “5##”, press the [TIME SET] button again to complete the Time and Date setting.

Formatting the microSD memory card

Note: All content on the microSD card will be erased during formatting.

1. Insert a microSD card into the scanner with the metal side facing up.
2. Turn on the scanner by pressing the [Power/Scan] button for 2 seconds.
3. Press the format button. An “F” will display on the LCD status display screen.
4. Press the [SCAN] button once to format the microSD card.
5. The SD card indicator will flash until the formatting process is complete.

Setting the resolution
Press the [DPI] button to select High / Medium / Low resolution. High/Medium /Low-resolution icons will be displayed on the status LCD.

Setting the scan mode
Press the [JPG/PDF] button to select JPG/PDF mode. The JPG/PDF icon will be displayed on the status LCD.

Setting the colour/mono mode
Press the [COLOR/MONO] button to select scan type Color/Monochromatic mode. Color/Mono icon will be displayed on the status LCD.

Calibrating the scanner
Note: Perform calibration only when the white balance needs adjustment

1. With the dry cleaning cloth provided, clean the scanning lens located at the bottom of the scanner.
2. Turn on the scanner by pressing the [POWER] button. Place the scanner on the white area of the White Balance Calibration paper provided.
3. Press and hold the [COLOR/MONO] button. While holding the [COLOR/MONO] button, press the [POWER] button and then release both buttons to enter into auto-calibration mode.
4. SD symbol will flash and then stop. “GREEN” and “RED” LED lights will turn on.
5. Do not move the scanner. Wait until the “RED” LED turns off. The “GREEN” LED will stay on.
6. With only the “GREEN” LED light on, start scanning the white paper by sliding the scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner backwards if necessary).
7. Press and hold the [POWER] button to power off the scanner. Calibration is complete.

Scanning a document
Note: To scan, make sure your scanner is not connected to the computer and not in WiFi mode.

1. Turn on the scanner by pressing the [Power/Scan] button for 2 seconds.
2. Hold the document firmly with one hand on a flat surface.
3. Place the scanner on the edge of the paper to ensure the whole document can be scanned.
4. Make sure to keep the scanning area in between the scanning width indicators marked on the side of the scanner.
5. Hold the scanner flat against the material and then press the [SCAN] button once.
6. Slide the scanner slowly, keeping your hand stable to get the best quality picture.
7. Press the [SCAN] button again to stop scanning.

Using Wi-Fi function

Enabling Wi-Fi function
View and transfer files from the scanner to your computer, laptop, smart devices and tablets via Wi-Fi mode.

1. Turn on the scanner and slide the Wi-Fi switch ON. “口口口口” will display on status LCD.
2. Wait about 30 seconds for Wi-Fi to initialize. The “BLUE” LED light will flash every 3 seconds once Wi-Fi mode is enabled and ready for connection.
   Note: The use of the Wi-Fi function will reduce battery life more rapidly. Turn Wi-Fi mode OFF when not in use to save battery. In Wi-Fi mode, Can not use the scanner to scan files and can not complete calibration mode naturally.

View files from an Internet Browser via Wi-Fi

1. Turn on Wi-Fi mode on your scanner.
2. Go to network settings on your computer/smart device to enable Wi-Fi setting
3. Search the “WIFISCAN-xxxxxx” network
4. Enter password “123456789” to connect to the scanner
5. Open the Internet browser and input “10.10.1.1” at the address bar to enter the navigation page to view and download files
6. On the navigation page, click the Choose file button to upload the file into the scanner.
   Note: Due to limited memory, large PDF files may encounter an error in displaying the files properly. Please connect to your computer via a USB cable to view your files.

USB Connection with Computer

1. Connect your scanner to your computer and then turn on your scanner.
2. Your computer will recognize the scanner as a “Removable Disk”,”口口口口” symbol will display on the status LCD. Click “Open folder to view files” to view, import, copy, move or delete scanned files.
   Note: If the Removable Device Window did not launch automatically, go to your “My Computer” and find the device under Removable Storage. Before connecting your scanner to the computer， please confirm the scanner is not in WiFi mode.

Specifications

Resolution

| Low resolution: 300×300 dpi Middle resolution: 600×600 dpi High resolution: 900×900 dpi

Maximum scanning speed for Letter size document

| Color High resolution Mono High resolution Color Medium resolution Mono Medium resolution Color Low resolution

Mono Low resolution

| 12.0 Seconds

10.0 Seconds

8.0 Seconds

6.0 Seconds

3.0 Seconds

2.0 Seconds

Capacity (Based on 1GB microSD card. Scan Letter size file, the quantity of scans varies

depending on the content complexity)

| Color High resolution Mono High resolution Color Medium resolution Mono Medium resolution Color Low resolution Mono Low resolution| 300 Scans (Min.)

320 Scans (Min.)

640 Scans (Min.)

700 Scans (Min.)

1600 Scans (Min.)

1800 Scans (Min.)

Scan width| 212mm
Scan length (max.)| 300dpi: 98″, 600dpi: 45″, 900dpi:35″
File format| JPG/PDF
LCD| Scanning status display
Auto Power Off| 3 Minutes
USB Port| USB 2.0 high speed
External memory| microSD/microSDHC memory card to up 32GB
Standard Battery| 2X AA alkaline batteries
Wi-Fi®| 802.11b/g/n

Computer system minimum requirement

Operating System

| Windows 7 / Vista / XP(SP3) and Mac OS 10.4 or above (Driver Free)
---|---
CPU| Pentium Ⅲ or above
RAM| At least 256MB
Interface| USB port

Troubleshooting

Problem

|

Cause

|

Solution

---|---|---

Cannot turn on the scanner

| 1. Low battery power.

2. Battery not inserted properly

|

Replace or install the battery correctly

Pictures cannot be saved when you are scanning them

|

1. The microSD card has not been installed

2. Memory is full

3. The MicroSD card has not been formatted properly

| 1. Install microSD card

2. Download the pictures from the scanner to the computer to create storage space

3. Reformat mircoSD card

Please refer to section 5.4

Computer does not recognize your scanner when connected (You cannot find removable

disk)

|

Connection failure.

|

Make sure all cable connections are secured. Restart the computer if necessary

The battery life is very short|

Use wrong type of battery

| Replace with new

2x AA alkaline batteries

Blurry images

| 1. The lens of scanner is dirty.

2. Contact Image Sensor aged.

| 1. Clean the lens with soft dry cloth.

2. Recalibrate scanner. Refer to section 5.8

ERR. LED is on after powering on scanner|

Sensor off-set

| Recalibrate the scanner. Refer to section 5.8

ERR. LED is on when scanning a document

|

Scanning speed is too fast

| Press the Power/Scan button to reset and scan the document again

Black Images/Black or white vertical lines

|

1. Scanner senor protective glass is dirty.

2. Calibration data is off-set.

| 1. Clean the sensor’s protective glass with clean and soft dry cloth.

2. Recalibrate scanner. Refer to section 5.8

Wi-Fi abnormal connection

|

1. Abnormal connection

2. The battery is low.

| 1. Reconnect Wi-Fi. Refer to section 6

2. Replace with new 2x AA alkaline batteries

For more information please visit www.my-hyundai.de AM-N44W-GB-BHS-1

Download PDF:Hyundai Mr Scan Mobile WiFi Scanner User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>