Elimko E-790 Slim Type Current Converter User Manual
- June 15, 2024
- Elimko
Table of Contents
Elimko E-790 Slim Type Current Converter User Manual
DESCRIPTION
E-790 series devices are rail-mountable industrial devices in a plastic case
designed to be used as signal converters.
E-790 series converters measure AC or DC current values at their inputs and
convert them to standard 0 – 20 mA, 4 – 20 mA or 0 – 10 V signals. The
operating voltage, input signal and output signal of the E-790 series devices
are galvanically isolated from each other.
The input signal of E-790 series converters can be ordered as 0 – 1 A AC/DC or 0 – 5 A AC/DC and the output signal can be ordered as 0 / 4 – 20 mA or 0 – 10 V.
E-790 series converters can be configured with special PC software provided by Elio.
E-790 device control units are designed for rail mounting and should be used in an industrial environment.
- The package of E-790 device contains; Device, User manual, Guarantee certificate.
- After opening the package, please check the contents with the above last. If the delivered product s wrong type, any teem s messing or there are visible defects, contact the vendor from which you purchased the product.
- Before installing and operating the device, please read the user manual thoroughly.
- The installation and configuration of the controller must only be performed by a person quaffed n instrumentation.
- Keep the unto away from flammable gases, that could cause exploson.
- Do not use alcohol or other solvents to clean the devce. Use a clean cloth soaked n water tightly squeezed to gently wpe the outer surface of the devce.
- It s not used n medical applications.
TECHNICAL SPECIFICATIONS
General
El ectrical :
Operating Voltage| 18 – 36 V DC
Power Consumption| 3 VA
Environmental Conditions:
Operating Temperature| -10°C to +55°C
Operating Humidity| < 95% RH (non-condensing)
Protection Class| IP20
Calibration Temperature| 25°C ±3°C
Input :
Input Signal| 0 — 1 AAC/DC or0 — 5 A AC/DC
Accuracy Class| 1 %
Output :
Output Signal| 4 – 20 mAor 0 – 10 V
Load Resistance| Maximum 600 0
Mechanical:
Dimensions| 90 mm x 112 mm x 65 mm
Weight (approx.)| 60 g
Connection Cables| Maximum 1.5 mm2 (AWG 16)
DIMENSIONS
TYPE CODING
EU Directive Compliance;
Electromagnetic : Compatibility Directive
EN 61326-1
Low Voltage Directive
EN 61010-1
CONNECTION DIAGRAM
Manufacturer / Technical Support:
ASO 2. OSB Alcı Mah. 2001. Cad.
No: 14 Temelli 06909 Ankara / TÜRKİYE
Tel: + 90 312 212 64 50 •
Faks: + 90 312 212 41 43
www.elimko.com.tr
e-posta: elimko@elimko.com.tr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>