PHILIPS BVC080 LED40 Essential SmartBright Solar Flood Light Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS BVC080 LED40 Essential SmartBright Solar Flood Light
Specifications
- Product Name: Essential SmartBright Solar Flood Light
- Model: BVC080 LED40/730 Solar
- Luminous Flux: 4,000 lm
- Color Temperature: 3000 K
- CRI (Color Rendering Index): 70
- Battery Type: LiFePO4
- Battery Capacity: 28.5 Ah
- Battery Voltage: 3.2 V
- Panel Type: Mono Crystalline
- Panel Voltage: 5 V
- Panel Wattage: 30 W
- Housing Color: Grey
- Ingress Protection Code: IP68 (Dust penetration-protected, pressure watertight)
Product Usage Instructions
Installation
- Identify a suitable outdoor location for the flood light that receives ample sunlight.
- Mount the solar panel in a location with direct sunlight exposure.
- Securely install the flood light using the provided installation accessories.
Operation
- Use the remote controller to turn the light on/off and adjust settings if applicable.
- The flood light will automatically charge during the day using solar energy and illuminate at night.
Maintenance
- Regularly clean the solar panel to ensure maximum efficiency.
- Check the battery status periodically and replace it if needed.
INSTRUCTION
BVC080 LED40/730 Solar
Solar flood lighting DIY kit with lithium ferro phosphate battery built in the
luminaire, Remote controller and installation accessories included. IP 65 ABS
plastic construction for sturdiness and long life. Available in 600, 900 and
1500 Lumens
Warnings and Safety
This product includes rechargeable batteries which must be adequately
charged under sunlight before use.
Product data
General Information
- Driver included Yes
Light Technical
- Luminous Flux 4,000 lm
- Correlated Color Temperature (Nom) 3000 K
- Color rendering index (CRI) 70
- Optical cover type Glass
Operating and Electrical
- Battery type LiFePO4
- Battery ampere hour 28.5 Ah
- Battery voltage 3.2 V
- Battery charging & discharging cycles 500
- Panel type Mono crystalline
- Panel voltage 5 V
- Panel peak wattage 30 W
Temperature
- Ambient temperature range 0 °C to 50 °C
Controls and Dimming
- Dimmable No
- Configurability not configurable
Mechanical and Housing
- Housing Color Grey
- Overall length 365 mm
- Overall width 288 mm
- Overall heigh t 60 mm
- Dimensions (Height x Width x Depth) 60 x 288 x 365 mm
- Material Acrylonitrile-butadiene-styrene
Approval and Application
- Ingress protection code IP68 [Dust penetration-protected, pressure watertight]
Essential SmartBright Solar Flood Light
Application Conditions
- Solar dimming profile Pre-configured
- Grid connection type Off-grid
- Battery location Inbuilt
Product Data
- Order product name BVC080 LED40/730 Solar
- Full product name BVC080 LED40/730 Solar
- Full product code 692382867167999
- Order code 911401875402
- Material Nr. (12NC) 911401875402
- Numerator – Quantity Per Pack 1
- EAN/UPC – Product/Case 6923828671679
- Numerator – Packs per outer box 4
- EAN/UPC – Case 6923828671730
DIMENSION
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V
www.lighting.philips.com
2024, March 22 – data subject to change
FAQ
- Q: Can I use this flood light indoors?
- A: No, this flood light is designed for outdoor use only due to its solar charging feature.
- Q: How long does the battery last on a full charge?
- A: The battery can last for several hours, depending on the selected brightness level and usage patterns.
- Q: Is it possible to replace the battery?
- A: Yes, the battery is replaceable. Contact customer support for guidance on battery replacement.