Elimko E-KC-100 Series Head Mounted Type Temperature Converter User Manual
- June 1, 2024
- Elimko
Table of Contents
Elimko E-KC-100 Series Head Mounted Type Temperature Converter
Specifications
Sensor
- RTD Pt-100
- B
- E
- J
- K
- T/C
- N R
- S
- T
- L
- U
- mV
Standard Lower Limit
IEC 60584 DIN 43710
Upper Minimum Limit Span
General Specifications
Accuracy
A/D D/A
Electrical
- Supply Voltage: 10.0 – 30 V DC
- Voltage Drop: 9.0 V
Environmental Conditions
- Operating Temperature
- Protection Class
Mechanical
- Dimensions
- Weight (approx.): 40 g
- Connection Cables: Resistance Thermometer (RTD) / Resistance Input – 3-Wire
Product Usage Instructions
-
Configuration and Installation
Before installing and operating the controller, thoroughly read the user manual provided. -
Cleaning Instructions
Do not use alcohol or solvents to clean the transmitter. Use a clean cloth soaked in water to gently wipe the outer surface of the transmitter. -
Safety Precautions
Avoid using the unit in medical applications. Keep the unit away from flammable gases that could cause explosions.
Frequently Asked Questions (FAQ)
Q: What type of sensors are compatible with the E-KC-100 converter?
A: The E-KC-100 converter is compatible with RTD Pt-100, B, E, J, K, T/C, N
R, S, T, L, U, and mV sensors.
E-KC-100 SERIES HEAD MOUNTED TYPE TEMPERATURE CONVERTER USER MANUAL
The E-KC-100 converter is designed for use in an industrial environment.
- The package of the E-KC-100 converter contains; the Converter, user manual and guarantee certificate.
- After opening the package, please visually check whether the type of the transmitter is suitable for the order, whether the above-mentioned parts are missing and whether the transmitter has been damaged during shipment.
- Before installing and operating the controller, please read the user manual thoroughly.
- The installation and configuration of the controller must only be performed by a person qualified in instrumentation
- Keep the unit away from flamable gases, that could cause explotions.
- Do not use alcohol or other solvents to clean the transmitter. Use a clean cloth soaked in water tightly squeezed to gently wipe the outer surface of the transmitter.
- It is not used in medical applications.
DESCRIPTION
E-KC-100 series transmitters are microprocessor based industrial instruments
in plastic case. E-KC-100 transmitters are used to convert the thermocouple
and resistance thermometer signals into standard 4-20 mA The configuration of
the transmitter is done by PC, using a software programme supplied by Elimko.
The RS 232 connection hardware is also available from Elimko.
TECHNICAL SPECIFICATIONS
OPERATING RANGE and MEASURING ACCURACY
(at 24 V supply voltage and 25°C ± 3°C ambient temperature)
If the input type and scale is not specified while ordering, factory settings
are; Input Type : Pt-100, and Scale : 0-200°C.
KY-KC100-0224-1
General Specifications
Electromagnetic Compatibility
The E-KC-100 meets the requirements of TS EN 61326-1.
DIMENSIONS
CONNECTION DIAGRAM
- Before operating the converter, ensure that the converter is correctly configured.
- Incorrect configuration could result in damage to the process being controlled.
- To minimize the pick-up of electrical noise, the wiring of low voltage lines, particularly the sensor input should be routed away from the high-current power cables. Where it is not possible, use shielded cable and ground the shielded cable.
- The cables used for powering the transmitter and the power outputs must conform to the standarts IEC 60245 and IEC 60227.
For thermocouple inputs, be sure to use the proper compensation cables and pay attention to the polarity of the connection.
Manufacturer / Technical Support
Elimko Elektronik İmalat ve Kontrol Ltd. Şti.
ASO 2. Organize Sanayi Bölgesi Alcı OSB Mahallesi 2001. Cad. No:14 Temelli
06909 Ankara / TURKİYE Tel: +90 312 212 64 50 (Pbx) • Fax: +90 312 212
41 43 E-mail: elimko@elimko.com.tr •
www.elimko.com.tr
KY-KC100-0224-1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>