G RBACH YT-ABSD20CP-A01 Stainless Steel Shower Column Without Mixer Instruction Manual

June 17, 2024
G RBACH

F+
CCG-DJ(G)-ZW-Y23070915
Installation instructions
Customer service:us@dylingmbh.com
Technical problem:support@dylingmbh.com
24/7 around the clock

G RBACH YT-ABSD20CP-A01 Stainless Steel Shower Column Without
Mixer

YT-ABSD20CP-A01 Stainless Steel Shower Column Without Mixer

Instructions for use:
Notice! All pictures shown are for illustrative purposes only.
Deviations from the products are possible.
The data may change with different installation scenarios.
Please install according to the actual situation.

Parts List

G RBACH YT-ABSD20CP-A01 Stainless Steel Shower Column Without Mixer - Parts
List

The distance between two wall holders can be adjusted flexibly up to a maximum of 84cm.

G RBACH YT-ABSD20CP-A01 Stainless Steel Shower Column Without Mixer - two
wall

Press the grey button while installing the sliding hand shower holder into the shower column.

Attention!

  1. While installing and adjusting the height of hand shower holder, please always press the grey button on the sliding hand shower holder until it reaches the desired position, to avoid the damage of spring.
    Please make sure the grey button on the sliding hand shower holder must face upward. If it facing down, the hand shower holder will slide down along the shower column.
    G RBACH YT-ABSD20CP-A01 Stainless Steel Shower Column Without Mixer - grey
button

  2. The 24mm diameter hole of sliding hand shower holder facing upwards, and 20mm diameter hole facing downwards.

G RBACH YT-ABSD20CP-A01 Stainless Steel Shower Column Without Mixer - hole
facing downwards G RBACH YT-ABSD20CP-A01 Stainless Steel Shower Column Without
Mixer - Parts 3G RBACH
YT-ABSD20CP-A01 Stainless Steel Shower Column Without Mixer - Parts
4G RBACH YT-
ABSD20CP-A01 Stainless Steel Shower Column Without Mixer - Parts
5G RBACH YT-
ABSD20CP-A01 Stainless Steel Shower Column Without Mixer - Parts
6

Troubleshooting

  1. Shower head with water dropping: Please always keep the shower head to be horizontally.
  2. When turn down the handle of diverter, water comes out from hand shower, but turn the handle up, water does not run out from shower head: The shower hose was installed to incorrect connector of diverter, please reinstall the shower hose correctly.
  3. Nozzles clogged and water does not come out: Please use a cloth and clear water to wipe the nozzles and remove scale.

Attention!
Check all connections leaking or not after installation. The improper installation of products is not covered by warranty. Especially the consequential damage caused by improper installation is not guaranteed.

Warranty conditions

We guarantee the perfect functioning of our items for two years. In the event of a warranty claim, please contact the trading partner from whom you purchased the item first. If in doubt, they will contact us.
Please tell us as precisely as possible what damage / error / defect the item has.

  1. The guarantee begins on the date of purchase of the item.
  2. Please keep the invoice. The invoice serves as proof of guarantee.
  3. The subject of the guarantee is the defect-free function of the item.

Defects must be reported immediately after they occur within the stated period of the guarantee. The defective article must be kept and returned to the trading partner within 30 days.

The following cases are excluded:

  1. Normal wear and tear.
  2. Improper installation.
  3. Improper handling.
  4. Improper repair.

Please read the instructions completely before installation and follow the instructions. These instructions contain important information on installation, adjustment, maintenance and spare parts.
Keep the instructions in a safe place, and pass them on to subsequent owners.
The guarantee is granted by Dylin GmbH, Glinde, 21509, Germany.

Safety instructions

  1. Please only have the installation carried out by competent persons.
  2. Please turn off the general water supply before installation.
  3. Make sure that all seals are seated correctly.

Disposal

To protect against transport damage, your product is delivered by a solid packaging.
The packaging is made from recyclable materials. Dispose of them in an environmentally friendly manner.
Don’ t throw the product into the normal household waste at the end of its service life, but inquire with your local government about the options for environmentally friendly disposal.

Technical specifications

  1. Pressure: recommended 3-12 bar, if more than 12 bar please install pressure reducer.
  2. Water temperature: Max. 80°C.

Service-Address
Importer: Dylin Gmbh
Address: Humboldtstr. 25A, 21509 Glinde, Germany.
© 2018 Dylin Gmbh. All rights reserved.

Manufacturer: Zhangpu Juhe Sanitary co., Ltd.
Area A, No.211 Maipu, Maipu Village, Sui’an Town, Zhangpu County, Zhangzhou City, Fujian Province,China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals