opera Classic Profiling Bed Grab Rail User Guide

June 4, 2024
opera

Classic Profiling Bed Grab Rail
User Guide
Enhancing Lives, Delivering Comfort

Before you begin! We recommend that you conduct a risk assessment before using the Opera Classic Profiling Bed Grab Rail to ensure it is suitable for your requirements.

General Information

1.1 Intended & Non-Intended Uses The Opera Classic Profiling Bed Grab Rail is designed to be used with the Opera Classic Profiling Bed. The grab rail is designed to be used to assist users in getting in and out of bed as a support aid and to help reposition when laying in bed.
A non-intended use is a use that deviates from the intended purpose. Non- intended uses include, but are not limited to the following:

  • The Opera Classic Profiling Bed Grab Rail is only intended to be used by adults, it is not designed to be used by children.
  • Using the grab rail with a bed is not outlined in this instruction manual.
  • Not complying with the positioning instructions in this instruction manual.
  • Modifying the grab rail.

Using the grab rail for any of the above uses or use that is not outlined in this instruction manual may be regarded as a non-intended use. This may void the warranty terms and conditions.

Warnings and Safety Instructions

During the briefing, specific attention must be drawn to any potential dangers. Prior to the first use, this instruction manual must be read conscientiously and in detail by the user/care personnel before using the grab rail.
Any incidents or issues must be reported to Opera at, support@operabeds.com.
Risk assessments should be conducted prior to using the grab rail to ensure that it is suitable for the user.
Position the grab rail at a minimum of 320mm away from the head and footboard to avoid potential entrapment.
When operating the profiling functions of the bed, do not hold on to the grab rail. Holding on to the grab rail whilst profiling may result in hand entrapment and injury.
Always check that the grab rail is fully secure and ensure that the bolts are fully tightened before use.
Regularly inspect the grab rail for signs of wear and damage on a monthly basis. Check that the bolts are still secure.
If there is a suspected fault or damage, take the grab rail out of service and inform the person responsible.
This product is not designed to be used by children, failing to observe this warning may result in creating hazards that can cause serious injury.

Installation

The Opera Classic Profiling Bed Grab Rail is supplied fully assembled. To install, remove all bedding from the bed to which you want to attach the grab rail too. This includes the mattress, duvet, and pillows.
Loosen the thumb screws (1) on the bracket of the grab rail (A). Lift the side rail to its highest position to allow the grab rail to fit onto the bed frame channel (B) (as per the photo below). Move the grab rail into the desired position. This is usually towards the head end of the bed.

opera Classic Profiling Bed Grab Rail - Fig 1

The space between the headboard of the bed and the grab rail must be a minimum of 320mm (12.5”) to avoid entrapment. Ensure compliance before securing the grab rail.

opera Classic Profiling Bed Grab Rail - Fig 2

Secure the grab rail in place by tightening the two thumb screws until they will not tighten any further.

opera Classic Profiling Bed Grab Rail - Fig 3

Cleaning and Disposal

The grab rail must not be disposed of as normal household waste after the end of its service life. Contact your local waste recycling facility for further instructions on safe disposal.
Regularly clean the grab rail with soap and water or antibacterial wipes.
Do not use abrasive cleaners, this could damage the surface material of the grab rail.
Do not use whilst wet, dry the grab rail before re-installation. Always inspect for signs of damage or wear before use.

Guarantee
As stated in the Standard Terms and Conditions below, Opera provides a manufacturer’s warranty of 1 year from the date of purchase.

Opera Warranty Terms and Conditions

6.1 Warranty Terms
6.1.1 Subject to the terms and conditions set out below, Opera agrees to repair or replace the product within the United Kingdom at its own cost, and any Opera accessory supplied with it, purchased by you from Opera. In circumstances where the product does not perform in accordance with Opera’s specifications during the warranty period of 1 year, commencing on the date of delivery (or deemed delivery) of the product.
6.1.2 This contractual product warranty does not operate to limit rights under the statutory warranties referred to in clause 6.3.1 below.
6.2 Warranty Conditions
6.2.1 Proof of purchase (invoice) must be provided when requesting service under warranty.
6.2.2 Opera requires any customer requesting service under the warranty to comply with directions from Opera staff in relation to troubleshooting any issue and facilitating any repair or replacement under these Warranty Terms and Conditions.
6.2.3 The customer is responsible for inspecting all goods received from Opera upon arrival. In instances where goods have been damaged in transit, the customer must report this to Opera within 3 working days of receipt of the product. Failure to report physical damage on arrival within 3 working days of receipt may result in denial of warranty for physical damage.
6.2.4 Opera reserves the right to replace the product or relevant part with the same or equivalent product or part, rather than repair it. Where a replacement is provided, Opera will determine, at its discretion, the closest product within the current range of products offered by Opera with which to replace the faulty or damaged product. The replacement product may differ from the replaced product in size and specifications, at the reasonable election of Opera. Opera may replace parts with refurbished parts. Replacement of the product or a part under the warranty does not extend or restart the warranty period.
6.2.5 If Opera is unable to repair or replace the product, the customer will be provided with credit for Opera products or may be refunded the price of the product (at Operas election). This credit or refund will be for the amount of the purchase price of the product, excluding the associated delivery cost.
6.2.6 In the event that a replacement, refund, or store credit is provided as per section 6.2.5, the faulty item will become the property of Opera.
6.2.7 Opera may seek reimbursement of any costs incurred by you where the product is found to be in good working order.
6.2.8 Opera reserves reasonable discretion to determine whether any product is or is not performing in accordance with Opera specifications, subject to applicable law.
6.3 General
6.3.1 Legislation may imply warranties or conditions or imposes obligations on Opera, which cannot be excluded, restricted, or modified in relation to consumer goods.
6.3.2 To the full extent permitted by law, but subject always to clause 6.3.1, the warranty will not apply in respect of a product:
(a) If the product has not been installed, operated, maintained, or used in accordance with the Opera instructions or specifications provided with the product;
(b) If the factory-applied serial number has been altered or removed from the product;
(c) To damage, malfunction, or failure resulting from alteration, accident, misuse, abuse, fire, liquid spillage, misadjustment of customer controls, use of an incorrect voltage, power surges, and dips, thunderstorm activity, force majeure, voltage supply problems, tampering or unauthorized repairs by any persons, use of defective or incompatible accessories, exposure to abnormally corrosive conditions or entry by any insect, vermin or foreign object in the product.
(d) To damage arising during transportation, installation, or while moving the product or to any transportation costs of the product or any parts thereof to and from the customer, unless otherwise specified in these warranty terms and conditions;
(e) To any third-party software or hardware not contained in the product as originally configured by Opera.
(f) To any failure, to the extent that the failure is not a failure of the product to perform in accordance with its specifications.
(g) To service any product whilst it is outside the United Kingdom.
6.3.3 To the full extent permitted by law, but subject always to clause 6.3.1:
(a) Opera will not be liable for any loss, damage or alterations to the third party products, no matter how occurring; or for any loss or damage arising from loss of use, loss of profits or revenue, or for any resulting indirect or consequential loss or damage.
(b) Opera’s aggregate liability in respect of all claims under the warranty shall not exceed the original purchase price of the product or, at Opera’s option, the replacement of the product with a like or similar product.
(c) Opera excludes all other warranties, conditions, terms, representations, and undertakings whether express or implied.

Notes ———————————–

Azure House, Connaught Road,
Kingswood, Hull, HU7 3AP
0333 222 8584
support@operabeds.com
operabeds.com
Version 1
Published in August 2022

Documents / Resources

| opera Classic Profiling Bed Grab Rail [pdf] User Guide
Classic Profiling Bed Grab Rail, Profiling Bed Grab Rail, Bed Grab Rail, Grab Rail
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals