marta MT-FN2554 Floor Fan User Manual
- June 11, 2024
- MARTA
Table of Contents
marta MT-FN2554 Floor Fan
Parts list
- Front safety grid
- Fan blades
- Round metal frame
- Rear safety grid
- Oscillating button
- Motor unit
- Pivot knob and tilt angle adjuster
- Retaining screw
- Small pivot knob and tilt angle adjuster
- Motor unit fastening screw
- Speed switch
- Motor axis
- Power cord
- Internal telescopic tube
- Fan height adjustment
- Stand
- Base
- Base weighter
- Washer
- Base screw
- Real set of the appliance could be different from listed in the User manual. Check once buy.
USER MANUAL
CAUTION
Read this manual carefully before using the appliance and save it for
future reference.
- Before the first use, check the device specifications and the power supply in your network. It is not intended for industrial use. For indoor use only. Use only for domestic purposes according to the instruction manual. Do not use with damaged cord, plug or other injuries. Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing. Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center. Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
- Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use. To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Do not touch running parts of the fan. Keep foreign objects away from running parts and grille. Do not block air inlets on the motor block. Do not use the fan without protective grilles.
BEFORE THE FIRST USE
For packaging reasons the fan was delivered unassembled. Do not connect the fan to the mains supply before you have completely finished the assembly. Please take note of the following steps when assembling the fan. Tighten the stand to the base with a base screw. Fix base cover to stand base with a screw. Unscrew the fan height adjustment, place the internal telescopic tube at the desired height and secure it with a fan height adjustment. Place the motor unit on the telescopic tube and secure it with the screw. Tighten the fastening screw lock knob and the tilt angle adjuster. Install the rear safety grid on the motor unit and tighten it with the fastening screws. Place the fan blades on the motor axis and fasten securely with the blades binding screw. Attach the round metal frame to the rear safety grid. Place the front grid on the round frame and fasten it with the screws. The fan is ready for work.
USING THE DEVICE
NOTE: Do not use the fan in wet conditions (for example rain) in order to avoid electrical shocks.
- Always place the fan on a dry and even surface. To make the fan oscillate, push the oscillation button down; pull the button up to stop the oscillation.
SPEED CONTROL To switch on the fan, simply press any of the speed control buttons: 0 – off; I – low airflow speed; II – medium airflow speed; III – high airflow speed
CLEANING AND MAINTENANCE
Before cleaning, always unplug the appliance. Do not use chemical and abrasive cleaners for cleaning. For seasonal storage use carton to cover the fan. Loosen fittings and remove the front grille. Use a cloth soaked in soapy water to the fan fans. Do not immerse the appliance in water.
SPECIFICATION
| Power supply| Power, W| Net weight / Gross weight, kg| Package size (L х W х H), mm| Producer: Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China Made in China
| 230 V ~ 50 Hz| 70| 5,8 / 7,2| 460 х 220 х 460
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating,
rubber seals, etc.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. Producer
may change the complete set, appearance, country of manufacture, warranty and
technical characteristics of the model without notice. Please check when
purchasing device. Current information about service centers is available on
the website http://multimarta.com