SHARP 218 Boardroom AV System Instruction Manual
- June 1, 2024
- Sharp
Table of Contents
SHARP 218 Boardroom AV System
Product Information
Specifications:
- Product Name: Sharp SPIEC Boardroom 218 AV System
- Touch Panels: Two touch panels on the east wall
- Control Features: AV control on the left panel, Teams control on right panel
- Display Mode: Split mode on/off for up to four displays
Product Usage Instructions
Powering On the System:
- Press Button 1 to power on the system and switch to the control page.
Display Modes:
- Split Mode Off:
- Press Button 2 to turn split mode off (combine all displays).
- Slider 4: Select the destination for a source (Choose Room or Teams).
- Slider 5: Choose the source to be sent to the highlighted destination.
- Split Mode On:
- Press Button 3 to turn split mode on (separate displays).
- Slider 1: Select the destination for a source (Choose one or more destinations).
- Slider 2: Choose the source to be sent to the highlighted destination.
Powering Off the System:
- Press Button 3 to power off the system.
- Confirm on the power page by selecting yes to power off or no to go back to the control page.
FAQ
- How do I switch between AV control and Teams control?
- To switch between AV control and Teams control, use the left panel for AV control and the right panel for Teams control.
- Can I send different sources to each display in split mode?
- Yes, in split mode, you can select different sources for each display by using the respective sliders.
Product Using Instruction
The Tech Immersion Lab has two touch panels on the east wall. The left panel
controls the AV in the room. The right panel controls Teams.
- Button 1 will power on the system and switch to the control page.
- Button 2 will turn split mode off (this will combine all four displays to view as one large display).
- Button 3 will turn split mode on (this will separate the four displays and allow up to four different sources at once.
- When split mode is off:
- Slider 4 is the destination for a source.
- Choose Room to send a source to the combined displays.
- Choose Teams to send a source to Teams as the shared content.
- Slider 5 are the source. The chosen source will be sent to the highlighted destination.
When the split mode is on:
- Slider 1 is the destination for a source. Choose one or more destinations.
- Slider 2 are the source. The chosen source will be sent to the highlighted destination.
- Button 3 will power off the system after a confirmation on the power page.
Choose yes to confirm and power off the system. Choose no to go back to the control page.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>