Zebra Technologies CS6080 Companion Series Scanner Support User Guide

Technologies CS6080 Companion Series Scanner Support
User Guide

Regulatory Information

This device is approved by Zebra Technologies Corporation.
This guide applies to the following model numbers:

• CR6080-SC
• CR6080-PC
• CR6080-SA
• SHARECRADLE-01

All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.
Local language translation: www.zebra.com/support
Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 50°C
For use only with Zebra-approved and UL Listed mobile devices, Zebra-approved, and UL Listed/Recognized battery packs.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information on the Bluetooth SIG listing, please visit www.bluetooth.com.
Regulatory Markings
Regulatory markings subject to certification are applied to the device signifying the radio(s) are/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: www.zebra.com/doc.
Health and Safety Recommendations
Safety in Hospitals and Aircraft
NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities, or by airline staff. These requests are designed to prevent possible interference with sensitive equipment.
RF Exposure Guidelines

Safety Information

Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc.
For further information on the safety of RF energy from wireless devices, refer to the RF exposure and assessment standards section at www.zebra.com/responsibility.
Power Supply
WARNING ELECTRICAL SHOCK: Use only a Zebra-approved, Certified ITE [SELV] power supply with appropriate electrical ratings. The use of an alternative power supply will invalidate any approvals given to this unit and may be dangerous.
Batteries and Power Packs
This information applies to Zebra-approved batteries and power packs containing batteries.
Battery Information
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of batteries according to instructions.
Use only Zebra-approved batteries.  Accessories that have battery charging capability are approved for use with the following battery models:
• Model BT-000413 (4.4 VDC, 745 mAh)
Zebra-approved rechargeable battery packs are designed and constructed to the highest standards within the industry.
However, there are limitations as to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh environmental conditions, and severe drops.
When batteries are stored for over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at a half charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half charge.
Replace the battery when a significant loss of run time is detected.
The standard warranty period for all Zebra batteries is one year, regardless of whether the battery was purchased separately or included as part of the host device. For more information on Zebra batteries, please visit: www.zebra.com/batterydocumentation and select the Battery Best Practices link.
Battery Safety Guidelines
IMPORTANT – SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
WARNING – When using this product basic safety precautions should always be followed, including the following:
The area in which the units are charged should be clear of debris and combustible materials or chemicals.
Particular care should be taken where the device is charged in a non- commercial environment.

• Read all the instructions before using the product.
• Follow battery usage, storage, and charging guidelines found in the user’s guide.
• Improper battery use may result in a fire, explosion, or another hazard.

To charge the mobile device battery, the battery and charger temperatures must be between 0°C and +40°C (+32°F and +104°F).
Do not use incompatible batteries and chargers. The use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or another hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support.
Do not disassemble or open, crush, bend or deform, puncture, or shred. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
The severe impact of dropping any battery-operated device on a hard surface could cause the battery to overheat.
Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
Do not modify, disassemble, or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water, rain, snow, or other liquids, or expose to fire explosion, or another hazard.
Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle near a radiator or other heat source. Do not place the battery into a microwave oven or dryer.
To reduce the risk of injury, close supervision is necessary when used near children.
Please follow local regulations to promptly dispose of used rechargeable batteries.
Do not dispose of batteries in a fire. Exposure to temperatures over 100°C (212°F) may cause an explosion.
Seek medical advice immediately if a battery has been swallowed.
In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.
If you suspect damage to your equipment or battery, contact Zebra support to arrange for an inspection.
Marking and European Economic Area (EEA)
Statement of Compliance (Radio)
For CR6080-SC, CR6080-PC, CR6080-SA
Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/EU.
Any radio operation limitations within EEA countries are identified in Appendix A of the EU Declaration of Conformity. The full text of the EU Declaration of Conformity is available at: www.zebra.com/doc.
Statement of Compliance (Non-Radio)
For SHARECREDLE-01
Zebra hereby declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, and 2011/65/EU.
The full text of the EU Declaration of Conformity is available at: www.zebra.com/doc.
Waste Electrical and Electronic Equipment (WEEE)
For EU Customers: For products at the end of their life, please refer to recycling/disposal advice at: www.zebra.com/weee.
The United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements – Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-3 ([B])/NMB-3([B])
This device complies with Innovation, Science, and Economic Development Canada’s license-exempt RSS. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Requirements – FCC and ISED
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid.
Mobile Devices
This equipment complies with RF Exposure limits established for an uncontrolled environment (General Population). This equipment should be installed and operated in such a way that a separation distance of greater than 20 centimeters is maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located (within 20 cm) or operating in conjunction with any other transmitter/antenna except those already approved in this filling.

Name and content of hazardous substances in the product

This form is prepared according to the provisions of SJ/T 11364.
O: Indicates that the content of this hazardous substance in all homogeneous materials of this part is below the limit requirement specified in SJ/T 11364–2014.
X: Indicates that the content of this hazardous substance in at least one homogeneous material of this part exceeds the limit requirement specified in SJ/T 11364–2014. (Enterprises can here, according to the actual The technical reasons for marking “×” in the above table will be further explained.

Warranty

For the complete Zebra hardware product warranty statement, go to zebra.com\warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s network and run your applications.
If you have a problem running your unit or using your equipment, contact your facility’s Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com\support.
For the latest version of the guide go to zebra.com\support.
Additional Information
For information on using the CS6080, refer to the CS6080 product guide available at: www.zebra.com/support.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide.
All other trademarks are the property of their respective owners.
© 2020 Zebra Technologies Corp. and/or its affiliates. All rights reserved.
www.zebra.com
MN-003855-01EN Rev. A

Documents / Resources

| Zebra Technologies CS6080 Companion Series Scanner Support [pdf] User Guide
CS6080 Companion Series Scanner Support, Companion Series Scanner Support, Scanner Support
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>