LINOVISION POE-Switch0504GD Industrial 5 Ports Gigabit Solar POE Switch User Manual
- June 15, 2024
- LINOVISION
Table of Contents
LINOVISION POE-Switch0504GD Industrial 5 Ports Gigabit Solar POE Switch
Introduction
This Ethernet Switch has 4 TP ports and 1 fiber port. TP(RJ45) supports 10/100/1000Base-T(X), FullHalf duplex mode and auto MDI/MDI-X connection; 1000Base-FX supports 1 or 2 core Single-mode or Multi-mode fiber. It’s a great choice for integrating networks consisting of network devices such as IP cameras and wireless access points between remote locations.
Unique Features
DC12V-48V PoE Switch
Support DC12V-48V input and standard IEEE802.3af/at PoE output with a built-in
voltage booster.
5-Port Full Gigabit PoE Switch
Provide 4 IEEE802.3af/at 30W PoE ports and 1 Gigabit uplink; All ports
10/100/1000Mbps self-adaptive full duplex; Total PoE budget 120W (DC24V/DC48V
input) or 60W (DC12V input).
Non-Stop PoE Supply with Dual Power Input
Support 2-channel DC12V-48V redundant power inputs and auto-failover, ensuring
a high-reliability networking system. Compatible with Mode B PoE output only.
Industrial Design
- Compact IP40 rugged metal enclosure;
- Wide working temperature -40°C to 80°C;
- Support DIN-Rail & wall mount
Package Contents
Connection Diagram
Installation
Set Up
- Connect the Ethernet port of the switch to a lP camera(PoE device)or network device with a network cable.
- Connect the fiber cable from the device(media converter or switch)on the other end to the SFP port of the converter.
- After the device is powered on, the PWR indicator will all be on. If the indicators are not on, check the power supply connection.
- After all cables are correctly connected, the indicators will be lit as per port status LEDs.
Panel View
The Port Status LEDs
Data Sheet
FAQ Related
What is the unique feature of this Solar PoE Switch?
Compared to a regular industrial PoE switch, this solar PoE switch has a
built-in DC12V to DC48V voltage booster so it can be powered by any power
source between DC12V and DC48V, for example,DC12V from solar power system,
DC12V from vehicle battery, DC24V from commercial buildings, etc.
What kind of PoE devices it can work with?
It provides PoE power to all of the standard IEEE802.3af/at PoE devices,
like IP security cameras, VoIP phones, PoE wireless AP, etc.
Does it come with a Power adapter?
No power adapter is included. You can use it with a regular DC12V or DC24V
power adapter, or industrial DC12V power supply unit.
Can it work in a harsh environment?
Yes, sure, that is what this PoE device is designed for.
How does the redundant power input work?
This PoE switch can be powered by two channels of DC power inputs. If there
is one power input fails, another power input will ensure the non-stop
operation of this PoE switch.
What is the draw current when connecting to DC 12V power?
If the PoE switch is not connected to a device, the current is 0.5A. If
devices are connected, the maximum current depends on the power consumption of
the connected devices, with a maximum of 5.5A.
What is the line pair of the switch?
Insert positive 1 and 2, and negative 3 and 6.
Does it work with non-PoE devices?
Yes, sure. Each PoE port supports PoE automatic detection. When connecting
to a non-PoE device, it provides data transmission only, and will not output
power to prevent burn or damage
Will this PoE Switch work with 24v PoE Devices?
No, the PoE Switch supports standard IEEE802.3af/at 48V PoE Power. It does
not support 24V Passive PoE. Please contact us to get a PoE 48V to PoE 24V
adapter.
Contacts
- For assistance, please contact lino-vision technical support:
- Email: support@linovision.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>