HPISPPBW-QSG Sprocket Panorama Instant Portable Color Label and Photo Printer User Guide

June 15, 2024
HP

HPISPPBW-QSG Sprocket Panorama Instant Portable Color Label and Photo

Printer

Contents

HPISPPBW-QSG-Sprocket-Panorama-Instant-Portable-Color-Label-and-Photo-
Printer-FIG-1 \(1\).

Product Overview

HPISPPBW-QSG-Sprocket-Panorama-Instant-Portable-Color-Label-and-Photo-
Printer-FIG-1 \(3\)

  1. Power button
  2. Camera
  3. Flash
  4. LED Ring Light
  5. 10.1″ LCD Touch Screen
  6. Photo Output Slot
  7. Kickstand
  8. Paper input tray
  9. Tripod Port
  10. AC Adapter Port

Getting Started

Connect the AC adapter to the photo booth and the wall outlet.

Starting Up and Shutting Down

  • a) Press the power button to turn the device on.
  • b) To turn the device off, press and hold the power button

How to Load Paper

  • (a) Press down on the grooves of the door and slide the door to open it.
  • (b) Load paper stack into the door pocket.
    • NOTE: Insert either 1 full pack (10 sheets) or 2 full packs (20 sheets) at a time.
    • Make sure the barcode is facing left and the glossy side of paper is facing right.

Setting Up Your Photobooth

Follow the on-screen instructions to set up your device.

HP Sprocket Photobooth App!

Download the companion app to receive real-time notifications on paper jams, network status, and more.

Tabletop Setup

To make the photo booth stand freely, pull out the adjustable stand and place the photo booth on a flat surface.

Door Mount

  1. To install the door mount, attach the adjustable strap to the handle on the top of the photo booth.
  2. Place the door hook over the top of the door.
  3. For extra stability use the complimentary double-sided mounting tape. Press the tape on the back of the photobooth against the door for steadiness.

Wall Mount

  1. Drill two holes into the wall and insert the wall anchors into them. Then, position the wall bracket over the anchors and fasten it with the screws.
    HPISPPBW-QSG-Sprocket-Panorama-Instant-Portable-Color-Label-and-Photo-
Printer-FIG-1 \(14\)

  2. Place the photo booth on the wall bracket and press the switch on top of the photo booth to secure it in place.

Tripod Setup

To install the tripod, screw the tripod into the port at the bottom of the photobooth. Tripod sold separately

HPISPPBW-QSG-Sprocket-Panorama-Instant-Portable-Color-Label-and-Photo-
Printer-FIG-1 \(16\)

  • Power rating: 12 V, 4 A
  • Warning: This device should only be used with the power cord and power adapter supplied with the product.
  • HP is a trademark of HP Inc. or its affiliates, used by C&A Marketing, Inc. under license from HP Inc.
  • ZINK, ZERO INK, and the ZINK logo are trademarks of ZINK Holdings, LLC.
  • Android and Google Play are trademarks of Google LLC.
  • Apple, iOS, and App Store are trademarks of Apple Inc. in the U.S. and other countries.
  • All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement, or approval.
  • Distributed by C8A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 USA. 0 2023. C&A IP Holdings LLC. All Rights Reserved.
  • Made in China.
  • EU rep: Global E-Commerce Experts, Rijnlanderweg 766, Unit H, 2132 NM
  • Hoofddorp, Netherlands
  • UK rep: Global E-Commerce Experts, Unit 5 Mountpark, Wide Lane,
  • Southampton sol 8 24, UK

Declaration (Germany)

  • This device is not intended for use in the direct field of view at visual display workplaces.
  • To avoid incoming reflections at visual display workplaces, this device must not be placed in the direct field of view.

Need Help?

To view instructional videos, helpful tips, and the full-length manual, scan the QR code below:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals