INMOTION WX-381A Wireless Over Ear Headphones User Manual

: June 4, 2024
: INMOTION

Table of Contents

WX-381A Wireless Over Ear Headphones
Contents
Functions:
Technical Specification:
FCC COMPLIANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INSTRUCTIONS
WIRELESS OVER-EAR HEADPHONES
User Manual

WX-381A Wireless Over Ear Headphones

Please read this manual carefully before using the headphones as this contains important safety information.
Please keep the headphones away from children.

INMOTION WX 381A Wireless Over Ear Headphones - Print
colours

Charging
Plug the charging cable into the Micro-USB port under the left ear-cap of the headphone. Plug the other end into the USB port of your computer or other device made for USB charging. The LED will turn red while charging. When fully charged the light will turn blue. Charge time is approx. 2.5hrs on an empty battery.
Power ON:
Press and hold the Multi-Function button for approximately 3 seconds. The headset will then go into Bluetooth search mode (red/blue light flashes quickly and alternately followed by the prompt tone “Power On”).
Power OFF:
Press and hold the Power button for approximately 3 seconds. The red light will turn off, followed by the prompt tone “Power Off”.

Headphone Pairing

Ensure that your phone or Bluetooth device is switched on.
To pair the headphone if it has not been previously paired with a device, switch on the headset. The headphone will enter search mode and the light will flash red/blue. To pair the headphone if it has been previously paired with another device, ensure that the previously paired device is switched off.
Ensure Bluetooth is switched on your phone or device and search for wireless devices.
Select “InMotion” from the device list. When successfully paired, there will be a prompt tone “Connected” followed by blue light.
The headphone that was previously paired will automatically connect with the device if the device is on and within connecting range. If not, the headphone will enter standby mode with continuous blue light.

Functions:

Active Noise Cancelling (ANC) On
Press the ANC button to turn it on. The LED will turn green. The ANC function is available with a wireless and wired connection.
Active Voice Cancelling (ANC) Off
Press the ANC button to turn it off. The green LED will turn off. The ANC function must be turned off manually.
Adjust the Volume
The volume will go up or down with a long press of the +/- button during a call or listening to music. When the volume reaches a maximum, there will be a warning tone.
Listen to Music
To listen to music, connect the headphone to your device. The available music functions will depend on your Bluetooth device. If you make or receive a call while listening to music, the music will pause until the call ends. To play a song, select it in the music player. To pause or resume playing a song, press the Play/Pause button.
To select the next song during playback, press the volume down button quickly. To select the previous song, press the volume up button quickly. To select the previous song, press the volume down button quickly.
Answer / End a Call
To answer a call, quickly press the Multi-Function button to answer it, or a long press (approx. 1.5 seconds) to reject the call. To end a call, press
the Multi-Function button.
Voice Assistant
To activate voice assistance, press the Multi-Function button twice.
Disconnect the Headphone
To disconnect the headphone from your device, switch off the headphone or disconnect them from the Bluetooth menu of your device.
Reconnect the Headphone
To reconnect to the phone or Bluetooth device that you last used with it, switch on the headphones, or remake the connection in the Bluetooth menu of your device.
Wired Connection
You can also use headphones with a wired connection. Simply connect the headphones to your device with the 3.5mm AUX cable provided.
Inserting the audio cable plug will disable the wireless functionality.

Technical Specification:

Bluetooth version: 5.0
Working range: up to 10m (33ft.)
Frequency response: 20Hz to 20kHz
Driver unit: 40mm
Impedance: 32±15%
Headset Sensitivity ：100±3dB(@ 1kHz)
Input: DC 5V/500mA
Battery: Rechargeable Lithium-ion battery; 3.7V, 250mAh
Charging time: 2.5 hours
Working time: 12 hours with 50% Volume

Caution

Please turn off the headset and put it into box to avoid damage, scratches, or bracket deformation when long time no use. In order to prolong the battery service life, please
charge every 3 months.
Please charge at first if the headset is left unused for a long time.
The battery of the headset is original and please don’t change it by yourself.
Please keep the headset in a dry place.
Please don’t put this product into an environment with a temperature over 60º or into a fire to avoid battery blast accidents.
Please don’t bend or twist the bracket to avoid deformation.
Please don’t tear down ear-cushions by unprofessional people.
Don’t adjust the volume to a very high level and continued playing. If tinnitus occurs, please turn the volume down or stop playing, do not turn the volume up suddenly. Please slowly turn up the volume to avoid hearing damage caused by high volume.
Do not use the headset in a dangerous place or place where cannot hear the outside sound.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio /TV technician for help

Supplier/manufacturer info:
UK sales: WH Smith, SN3 3RX UK
USA Sales: IMEG LLC, 3755 W Sunset Rd Suite A,
Las Vegas, NV 89118
EU sales: WH Smith Ireland Limited, 6th Floor,
2 Grand Canal Square, Dublin 2, ROI
Produced in China