tommee tippee 0224249 ColicSoothe Milk Air Remover Bottle Instruction Manual

: June 15, 2024
: Tommee Tippee

Table of Contents

Preparing for use
How to charge
How to use
How to clean
Troubleshooting
Safety information
Technical Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**tommee tippee 0224249 Colic Soo the Milk Air Remover Bottle Instruction Manual

**

Here for you

Feeding a baby who is experiencing colic symptoms can be stressful.

Colicsoo the is here to help support you and your baby by reducing the amount of air your baby ingests. Air ingestion is one of the things that can cause baby discomfort during feeding.

Using innovative vacuum technology this product draws air out of the milk, which can be introduced to milk during the preparation of your bottle, usually by shaking to mix formula. We recommend stirring your formula to minimise this.

If your baby is experiencing colic symptoms you can also use our advanced anti-colic™ bottle which removes air from the bottle whilst baby is feeding. This along with colicsoothe will give you the best chance of reducing air ingestion throughout your feeding routine.

Questions?
Contact our customer care team on 1-800-096-938 Or scan the QR code to watch a video on how to use.

A Lid
B Chamber
C USB power cable
D USB power adaptor
E Start button
F Light
G Pressure release valve

Light colour/action	Meaning
Static green ligh	Cycle in progress
Flashing green light	Cycle finished
Static red light	Low battery
Flashing red light	Charge product before use
Green light when product is connected via power adaptor	Fully charged

Preparing for use

When preparing a bottle for baby, ensure hands, surfaces and the product are thoroughly clean and dry.

How to charge

Charge before first use using the USB cable and adaptor provided.
It will take approximately 4 hours to fully charge.
When the unit has 20% battery left a red light F will appear. When the red light F is flashing you must charge the product.
20% battery remaining red

needs charging red flashing

The product is fully charged when the light turns green F.
fully charged green

How to use

Ensure the product has charge and is on a flat and stable surface prior to using.

Prepare your bottle as per the manufacturer’s recommendation if using formula. Once ready place into the chamber B . Breast milk can also be used.
Before placing into the chamber, remove the lid, teat and screw ring of your bottle and place the bottle base ONLY into the chamber B .
Now place the lid A onto the chamber B , and screw on tightly keeping the product on a flat surface.
Press the start button E for approximately 2 seconds to start the air removal cycle. The green light F will show and you will hear a sound to indicate the vaccum system has started, this will last up to 60 seconds.

After approximately 60 seconds the sound will stop, however the air removal cycle will continue.
The total time is approximately 3 minutes.
Note: Keep the device upright, the air removal cycle will stop if the device is tipped.

When the air removal cycle is finished the green light will flas
in progress static green

complete green flashing

Before removing the lid, press and hold the pressure release valve G.
You will now hear air being drawn into the lid A . Once this stops, keep holding the release valve G for a further 10 seconds. You will now be able to remove the lid by turning it anticlockwise.
Carefully remove your bottle from the chamber B . Attach your screw ring and teat, and feed. DO NOT shake the bottle once your milk has been through the air removal cycle, as this will put air back into the milk.
Use the prepared milk immediately.
Note: If any milk is spilt into the chamber, see below for cleaning methods.

How to clean

The lid A is wipe clean only.
The chamber B can be hand washed only with warm soapy water and then rinsed.
DO NOT CLEAN IN THE DISHWASHER, OR STERILISE.

Troubleshooting

Green/red light is flashing and my product is not working.
Make sure your product is on a flat surface, then press the start button E . Your product will not operate if the device is tilted.

My product won’t switch on (no green light).
Ensure the unit is fully charged, connect the USB cable to a USB adaptor, and plug it in. Once the green light F is on, the unit is ready to use. Charging from an empty battery will take approximately 4 hours.

I can’t remove the lid.
After the air removal cycle has finished (approximately 3 minutes) , follow point 6.

Safety information

IMPORTANT WARNINGS
These instructions can also be found at www.tommeetippee.com Please read and retain the instruction guide for future reference as it includes important information.

Adult use only – Keep all components out of the reach of children.
Do not allow a child to play with it – It is not a toy.
Do not operate if there is any damage to the appliance or the cord.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent.
Keep USB cords away from hot surfaces.
Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
Only use this product on a stable and flat surface. Do not attempt to remove, replace or repair the battery from this product.
Do not dispose of batteries in a fire, they may explode.
Please dispose of batteries in accordance with local regulations.
Do not subject cells or batteries to mechanical shock.
Do not use any charger other than the charger specifically provided for use with the equipment.
Do not leave the product on charge when not in use.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
This appliance contains batteries that are non-replaceable.
WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
Use only with ES050C-U050100XOS or JOD-S-050100AU-U-2 supply unit.

Technical Information

Model: 1211
Rated voltage: 3.7 V
Input voltage: 5V 0.5A
Battery Type: 18350 Li ion
Battery Capacity: 900 mAh

This product contains a battery which is permanently built into the product for safety and performance reasons. The battery should not require replacement during the lifetime of the product. It should only be removed by skilled service personnel. Dispose of this product as electrical waste to ensure the correct waste treatment of the battery.
Made in China.

Let us know what you think
We’d love to hear what you think of our colic the air remover. Share your photos, reviews and tell us about your experiences on our social channels.

Any questions?
Visit our website: tommeetippee.com

May born ANZ Pty Ltd., (ABN 66 154 703 134), PO Box 475, Mt Waverley , VIC 3149, AUSTRALIA.

All IP rights held or used under licence by Mayborn (UK) Limited and/or its affiliates. TOMMEE TIPPEE®, COLICSOOTHE™. Copyright © 2023.
Patented and patent pending; EP2948032 and see https://www.tommeetippee.com/en-us/legals/patent.