phrozen 8K S Sonic Mega Printer User Manual

: June 15, 2024
: phrozen

Table of Contents

8K S Sonic Mega Printer
Introduction
Key Notes Before Start
Maintenance
Prepare Your 3D Printer
Printing Your First Print
After-Sales Service & Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SONIC MEGA 8K S

8K S Sonic Mega Printer

Dear User,
Thank you for joining us. Please read the Sonic Mega 8K S manual thoroughly and follow the instructions step by step to get the best printing experience. phrozen 8K S Sonic Mega Printer - Figer 1

Introduction

Printer Parts phrozen 8K S Sonic Mega Printer -
Parts

The Toolbox phrozen 8K S Sonic Mega Printer -
Toolbox

Operation

All specifications have been tested in a laboratory. Certain specifications are subject to change without prior notice. For the latest update, please refer to Phrozen’s official website.

Key Notes Before Start

Stable Printing Environment
Store your 3D printer in a dry and wellventilated environment. Place it onaflat surface and avoid direct sunlight exposure.

Protective Measures
While printing and using resin, please make sure to wear gloves, masks, protective goggles, and long-sleeved clothing. phrozen 8K S Sonic Mega
Printer - Toolbox 2

Maintenance

Clean the Z-Axis
First, wipe the z-axis T-screw with cleanroom wipers.
Then, applya thin layer of general lubricant sothat it whirls smoothly.
Clean the 3D Printer
Use sanitizing alcohol and tissue paper to carefully clean the printer, the resin vat, and the buiding plate. phrozen 8K S Sonic Mega Printer - Toolbox
3

Z-Axis Calibration
The Sonic Mega 8K S comes with a pre-calibrated building plate, so you can start printing straight out of the box.
If you need to change the release film or install accessories, please re- calibrate your z-axis afterward.
lf you have any technical questions, please scan the QR codes to contact our support team.

https://phrozen3d.net/uK6Ka

Prepare Your 3D Printer

For first-time use, please thofoughly follow the steps below to conduct the LCD Test to make sure that your 3D printer is readly to print.
LCD Test

Clickon[TOOLS 1. Then clickon [LCDTEST].
Checkto seeif the LCD screen displays the same image as seen on the touch panel.
When the LCD screen clearly displays all the images, the LCD TEST is complete.

phrozen 8K S Sonic Mega Printer - LCD Test *Please refer to the actual operation situation based on the printer display.

Printing Your First Print

File Format
The Sonic Mega 8K S is compatible with PRZ and .CTB formats.
Usethe slicer software of your choice to convertyour STL or OBJ files into PRZ or CTB files.
Prepare Your 3D File

0n your computer, import the STL or .08J file to the slicer software of your choice.
Click[SETTINGS Ito add a new printer and choose [ Sonic Mega 8K S1.Then, set your print parameters according to the resin you will use.
Slice the 3D file and save it as a .CTB/PRZ file before transferring it to a USB stick.

Test Files for your first Print

The UsB included in the toolbox contains both STLand CTB, filesof two test models:”Phrozen test “and ” Phrazen_XPFinder’;
You can directly print the (CTB files on the USB with Aqua-Gray 8K/TR300 Resin.
If you are printing with other resins, slice the STL files with the compatible parameter settings required for your resin:

| |
---|---|---

<https://lihi1.com/8UT0T>

| https://lihi1.com/P81CE| https://lihi1.com/xdO1B

Please refer to the resin piofile for the updated printing parameters and use the XP_finder e on the USE to find the optimal printing parameter.

Performing Your First Print This printing test is to be performed with Aqua-Gray 8K and Phrozen XP Finder test file.

Tighten the screws on your resin vat and building plate. Make sure that both of them are clean from debris.
Shake the resin bottle for 1 minute. When pouring, make sure the resin does not exceed the mark on the resin vat.
Plug your USB into the printer and choose print. Choose the Phrozen_XP_Finder_Mega8KS_AQ8K.ctb and start printing.
While printing, please keep the lid closed to prevent light exposure that may affect your prints.
Once printing is complete, carefully remove the building plate and use a metal scraper to carefully remove your print.
Usea 95% sanitizing alcohol or Phrozen Wash Resin Cleaner to clean your printed models. After it’s fully dry, post-cure your models with a curing station.

phrozen 8K S Sonic Mega Printer - Toolbox 5 NOTICE: When instaling the resin vat, please aign the screws atthe bottom of the resin vat with the platform grooves to aviod damage caused by the screws scratchingthe LCD panel.

After-Sales Service & Warranty

Phrozen offers a one-year warranty for all parts, excluding consumable components such as the LCD screen and ACF film.
Sonic Mega 8K SLCD screenis covered undera 3-monthwarranty. Please note that this warranty does not cover any damages caused by human factors.
If you encounter any difficulties, please scan the QR codes down below to contact us.

Contact us!

phrozen 8K S Sonic Mega Printer - QR Code 8 https://helpcenter.phrozen3d.com/hc/en-us/requests/new

Congratulations!
You have just completed your first run.
We hope you’ve had a great experience!
Please follow Phrozen’s social media accounts and subscribe to our YouTube channel to learn more about printing tips and share information with the community.

|
---|---