RATTAN LF 750W Step Through Foldable Fat Tire Ebike User Manual
- June 4, 2024
- RATTAN
Table of Contents
- MAIN PARTS INTRODUCTION
- DISPLAY FEATURES
- ASSEMBLY INSTRUCTIONS
- Stem
- ADJUSTMENT
- PREPARING TO RIDE
- RIDING GUIDANCE
- SERIAL NUMBER
- Installation
- Overview of GD06
- Presentation of screen
- Press button definition
- Operation instructions
- Parameter setting
- Specifications
- Error code definition
- Notices
- FAQ
- OPERATING SAFETY
- TROUBLESHOOTING
- SAFETY PLEASE CHECK BEFORE RIDINGT
- MAINTAINING YOUR BIKE
- WARRANTY
- DISCLAIMER
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RATTAN LF 750W Step Through Foldable Fat Tire Ebike User Manual
Thanks for your LM/LF Ebike purchase
We really appreciate your business cooperation with us and we wish you a good
time with the ebike.
Please feel free to contact us if thers is any questions about the bike.
WARNINGS
Congratulations on your purchase of a new Rattan E-bike! The bike comes 95%
assembled and here is the guide helps you get familiar with your new bike in
unboxing. The bike may need adjustments in this process as shipping can
sometimes be bumpy. We recommend an adjustment and inspection by a reputable,
certified bicycle mechanic before the first riding. Please read the whole
manual patiently before you use the new electric bike Rattan E-bike assumes no
liability for any harm, injury, or death of the rider. do not modify or
disassemble the original electrical components of the bike.
Any of the above will invalidate the warranty and even bring hurt to you.There
will be some risks during the process of experiencing the bike.
MAIN PARTS INTRODUCTION
DISPLAY FEATURES
- Battery Level Indicator
- Speed
- Pas level
- ODO Mileage
ASSEMBLY INSTRUCTIONS
Unfold the bike
Step1: The bike comes being folded as the picture one shown.
Step2: unfold the bike and press the quick release according the
direction
Step3: turn the buckle into the hole of the quick release to lock it.
Handlebar
Step1: insert the stem of the handlebar into the top tube along the
groovet
Step2: Adjust the height of the handlebar then tighten the screw and lock
the release.
Stem
Rear seat
Step1: please unscrew the screw on the picture and connect the cushion
with the rear seat.
Step2: push the cushion according the direction the picture shown, then
tighten the screw.
Pedals
Unfold the pedals as the picture shown.
Seat post
Search a comfortable height of saddle by sitting on the saddle with your feet
on the ground.
The height of the Saddle should not be pulled higher than the
safety tick marks on the Saddle Post.
Then please lock the seat post clamp tightly
ADJUSTMENT
Battery
Lock on the battery
Turn the key to ‘ON’ position, and you could see the battery power by pressing
the button on the battery.
The picture 3 shows the charging port of the battery.
You could adjust the battery track by unscrewing the screws on the bottom to better connect the battery and the bike.
Brake
- Adjust brake rotor
- Adjust the brake
- Adjust brake rotor
Make sure the brake rotor is in the middle of two brake pads. Adjust the brake
tension according to your riding habits.
Loosen the screw and adjust the brake wire to the suitable brake tightness.
Loosen the screws to adjust the (abnormal noise or brake stuck when braking).
Adjust the brake pad to keep the rotor in the middle position. Tighten the
screws after each adjustment.
PREPARING TO RIDE
Check
- Make sure all components are tightened. Adjust the height of the handlebar and the seat post. DO NOT raise it above the safety line.
- Make sure the brakes can cut off the power supply to the motor, and whether it is sensitive and reliable.
- Make sure the front and rear axle nuts are tightened.
- Make sure the display, brakes and lights can work properly.
- Make sure the chain is tight.
- Make sure the pedals and all the connectio parts are firm and would not loose, and whether the crank is flexible without jamming.
- Make sure the front and rear tire pressure and tire wear are suitable for your journey ahead.
- Make sure the throttle works well without jamming, and whether it feels tight or loose when pressing the throttle.
- Make sure the battery has been locked.
RIDING GUIDANCE
Three modes
Pedal Mode
This mode does not require any power. It allows the E-bike to work as other regular bike. You will be automatically switched to this mode when the battery dies while riding.
Electric Mode
Turn on the display and press the throttle slowly to get started. When release the throttle slowly, the riding speed will gradually drop until power off.
Pedal Assist Mode
Accelerate slowly and use the pedal assist in the beginning of riding. When riding against the wind or climbing the hill,avoid using the pedal assist to protect the battery.
SERIAL NUMBER
There is a serial number attached on head-tube or on the bottom axis connecting the pedals as shown in the fol lowing picture. Please take a picture ahead once you received the bike.
You may be asked for a picture of your bike’s serial number as a part of warranty requests and may also be asked to provide this number to law enforcement provided that your bike is stolen.
DISPLAY
Material
Caser and Cover and Press button: ABS, LCD window: PMMA
Dimension
Outside and mounting dimensions(mm)
Press button outside and mounting dimensions (mm)
Installation
- Install the display in the middle of handlebar, then adjust to suitable angle, install the press button to left side of handlebar.
- Power off the device, connect the device to controller.
- Power on.
Overview of GD06
-
UART protocol:
Equipped with independent press buttons. -
Speed:
Real-time SPEED. -
kmh/mile:
Kmh/MPH according to habit -
Battery level:
Indicates the battery level in real time -
Head light control:
Press button to power on/of -
Back light adjustment: 3-level adjustment
-
Assist level:
From 0 to 5, press button to change assist level, 0-no assist, 5-default valu -
Distance:
ODO/Trip/Driving duration -
Error code:
Please refer to appendix table 1 for definition -
6km mode:
In this mode, it will display “WALK” on the screen -
Parameter setting:
Set parameters, such as: wheel size, speed limit etc
Presentation of screen
-
Battery Level Indicator
-
Speed
-
Pas level
-
ODO Mileage
-
Battery level: 5 levels, voltage interval could be customized
-
Speed: Real-time SPEED
-
Speed unit: Kmh/MPH
-
6km mode
-
Assist level: actual assist level 0~5
-
Head light icon: indicates when head light and back light are on
-
Distance : Trip/ODO
-
Driving Duration
-
Error code : “ERROR” and code when there is error
Press button definition
GD06 uses independent press button, in total three buttons:
Operation instructions
Power ON/OFF
When the power is off, Long press during 3seconds, screen will display all
contents and start to normal working mode, and controller will be turned on
When the power is on.
Long press during 3 seconds,screen will be powered off, and controller will be
turned off. If no any operation both on bike and display during 10minutes(time
could be set), the display will turn off automatically, in this case, no power
consumption for both display and controller.
ODO/TRIP
Long press ****and switch different speed information,Real time speed( SPEED)→ Max speed( MAX SPEED)→Average speed (AVGSPEED)
ODO/TRIP/ Driving Time/Error Code
Short press to switch ODO/TRIP/ Driving Time/Error Code Trip(Single trip distance)→ODO(Accumulated distance) →TM (Driving Time)→REE(Error Code).
Assist level
Short press ****or to change assist level, default value is level 1
Head light control
Long press for 3 seconds turn on/off the head light。
6km mode
When the bike is stopped, long press ****and , will enter 6km/h mode, the speed will be 4.5~7.5km/h according to different road conditions, “WALK” will show up on screen, long press again or short press ,will quit 6km/h mode. Long press or short press could be customized by clients.
Parameter setting
- .When the display is powered on,long press and ,will enter parameter setting mode,in this mode, can change parameter values, long press again and will quit parameter setting mode or no operation during 10s will also quit this mode.
- In parameter setting mode, short press ****/ will change parameter value,short press will save current value and switch to next parameter.
P01-back light lightness :
short press ****/ will switch from 1 to 3, Level 3 is lightest. Level 2 is default value.
P02-kmh/MPH :
Short press ****/ to Switch kmh/MPH.
P03-Working voltage :
short press ****/ to switch 24V,36V,48V.
P04-Auto shutdown time:
short press ****/ to switch from 0 to 60, it is the time(in minutes) to shut down the screen automatically if no operation 0 means never shut down, Default value is 10 minutes
P05-Number of Assist levels:
Short press / to change level 3->5->9.
- 3: 3 assist levels
- 5: 5 assist levels
- 9: 9 assist levelst
P06-Wheel size selection:
short press ****/ to switch wheel size,step: 16 inch,20 inch, 22 inch, 24 inch, 26 inch, 700C, 28 inch.
P07-Number of magnets for speed sensor :
short press ****/ to switch from 1 to 15.
P08-speed limit :
short press ****/ to set the speed limit from 10 to 41km/h.
This feature is reserved:
display P09, invalid.
This feature is reserved:
display,invalid.
P11-assist sensitivity setting :
short press ****/ to switch from 1 to 24.
P12-assist starting power setting:
short press ****/ to switch from 0 to 3.
P13-Assist magnetic disc types:
short press ****/ to switch from 6- >6->8->10->12 ,different numbers of magnets.
P14-Current limit for the controller:
short press ****/ to switch from 1 to 20A
This feature is reserved:
display P15,invaild.
P16-Reset ODO distance:
long press during 5 seconds.
P17-The signal direction of the booster sensor:
short press **** / to switch from 0 to 1;
0: Booster signal;
1: Power signal negative.
P18-Shift gears with gear :
short press ****/ to switch from 0 to 1;
0:Don’t shift gears
1: Shift gears.]
P19- Throttle the 6KM function :
short press ****/ to switch from 0 to 1;
0:Turn to the normal
1:Throttle 6Km.
Specifications
- Power supply: 24V,36V,48V
- Rated current: 10mA
- Max current: 30mA
- Leakage current after power off: <1uA
- Current supply to controller:50mA
- Working Temperature:-10~60℃
- Storage temperature:-20~70℃
Error code definition
When an error appears, GD06 will notice users by different codes, please refer to table 1 for different codes:
Code (Decimal)
|
Signification
---|---
0
| Normal
6| Low Battery level
30| Communication failure
21|
current sensor fault
21
| Throttle failure
23|
Failure of motor phase line
24
| Motor hall failure
25|
Brake abnormity
Notices
Power on and power off must keep an interval of at least 3 seconds, please don’t press “ ” button frequently when it is powered off.When the temperature is under -10℃, the s creen will be a little darker than normal, when the temperature increases, the screen can go back to normalt.
FAQ
Q: Why I can not power off?
A: Please check connection between display and controller.
Q: What can I do if an error code displays?
A: Find a nearest shop to get repair. We offer 1 year of warranty for
quality issue except frame is broken.
Version
This is a universal manual for GD06.It could be customized by each client. Please confirm all details before purchasing.
OPERATING SAFETY
- This Ebike will power off when braking. It ensures safety of riding.
- Do not carry people on the rear seat. The weight limit of the rear seat is 25kg.
- Do not ride exceed the speed limit set by the local traffic laws. Comply with the CLASS 1 maximum speed limit: 20MPH.
- Always wear a helmet that meets the standards and make sure having the necessary protection to ensure the safety when riding the Ebike,
- Turn on the headlight when riding at night. Use the headlight for a long time will consume part of the electric energy and reduce the mileage.
- Avoid pressing the throttle frequently and rapidly to start the Ebike when stationary to extend the service life of the motor, battery and electrical components.
- Turn off the display when parking or leaving the Ebike to prevent accidents caused by accidentally turning the throttle and the Ebike suddenly moving.
Recommendation: Press the throttle slowly for safety.
TROUBLESHOOTING
The battery cannot be charged, the display shows an abnormal battery power.
- Use a multimeter to check if the battery still have voltage.
- Check if the charger indicator is normal. (Red light means charging, green light means fully charged)
- The battery case is damaged, stop using the battery and contact us.
-
The brakes make abnormal noise.
Adjust the brake pads or brake rotors, as we noted in the picture above. -
The rear wheel motor makes abnormal noise.
Lift the rear wheel off the ground and press the throttle to see if the rear works. Then contact us with a video for further solutions. -
The derailleur is pressed or the chain falls.
Try to strengthen or adjust the derailleur (refer to the relevantpart in above) -
The Ebike comes without keys.
The keys are hung on the wires in front of handle bar , Check the wires in front of the handlebar and see if it falls into the box. -
The tires got flat or could not be inflated.
The tires will not be filled with air. Ride the bike after inflating the tires. (The pumping range is 17-18 psi)
Please check if there is an hole at inner tube and if there is something sharp punctured the iner-tube.
SAFETY PLEASE CHECK BEFORE RIDINGT
- Check if all the fasteners and accessories are well tightened.
- Check if the front and rear axle are secure to ride.
- Check if the handle bar and stem are loose
- Check if the tire pressure exceed the recommended one marking on the side of tire walls.
- Check if the brake is tightened enough
- Check if the seat post is higher than the safety tick marks on it.
- Check if the total weight the bike carry is higher than 300lbs, that’s the maximum weight capacity of the bike.
MAINTAINING YOUR BIKE
Battery Maintenance
- Fully charge the battery for the first use.(more than 6 hours)
- Do not use the battery in low power level.
- Must use the specified charger for charging.
- Do not charge the battery at high temperature (over 212 Fahrenheit/100°C). Charge at ventilate place.
- If the battery is not in use for a long time, charge the battery at least once a month to keep the battery active.
- Keep the battery away from water or any other liquid.
- Turn off the battery when not in use.
- Fully charged the battery before use each time. It will extend the battery life.If there are problems with the battery, do not charge it anymore and contact us for further solutions.
Frame Maintenance
- Pay attention to the frame maintain. Wipe the bike and keep it dry.
- Any merchandise with electrical components is not recommended to be exposed to water.
- the warranty of the Rattan does not cover water damage.
- please try not to store or use the bike in wet condition.
Brake Maintenance
- Pay attention to the frame maintain. Wipe the bike and keep it dry.
- Any merchandise with electrical components is not recommended to be exposed to water.
- the warranty of the Rattan does not cover water damage.
- please try not to store or use the bike in wet condition.
Brake Maintenance
- Check brake pads regularly.
- Check the brake rotor regularly to prevent deform. If it is a hydraulic brake, check regularly to see if any oil leakage.
- Clean the brake regularly.
Motor Maintenance
- Do not try to disassemble the motor.
- If there is any problems with the motor, contact Rattan with a video.
Tire Maintenance
- Check regularly to prevent air leak.
- Check spokes regularly.
Derailleur Maintenance
-
Check the rear derailleur regularly to see if it changed to every
gear (contact us for the video about how to adjust the shifter). -
Check the rear derailleur guard to see whether it bent to affect the derailleur or not.
WARRANTY
The main parts of the warranty provisions
component
| Warranty period| Performance failure|
Remark
---|---|---|---
Front fork handle bar
|
1 year
|
- Natural sealing off. Fracture key parts crack..
|
Except damaged caused by riders
Motor
|
1 year
|
- Internal gear break. Bearing broken.
- The wheel hub shell cracking.
- Coil burned.
- Magnets off.
- Clamping stagnation or have strange noise
Charger
|
1 year
|
- Doesn`t work
|
Disassemble personally will not be replacedt
Controller
|
1 year
|
- Short circuit or open circuit.
- Burnout.
- Mousse tube damaged
Battery
| 1 year|
- Not working
Display
|
1 year
|
- Not working
The battery warranty does not include damage
from
- power surges.
- use of 3rd party charger.
- improper maintenance or other such misuse.
- normal wear, or water damage (including rust).
- Accessories sold on rattanebike.com are notcovered under warranty (except in cases of shipping damages).
- Stolen bikes are not covered under warranty.
- Necessary precautions must be taken to ensure the bike and battery are not exposed to severe weather conditions. Exposure to very wet, hot, or cold conditions may invalid the warranty.
These items wear down with normal use and are not covered under warranty. Items including
- the chain
- tires
- wheels
- tubes
- battery handle
- brake pads
- cables
- housing
- grips
- spokes
We will replace any parts deemed to have been damaged during shipping.
Shipping damage must be reported to Rattan Ebike within 14 days of shipment arrival. This applies to all products including bikes and accessories.
You will NOT be refunded as compensation for your time or efforts replacing damaged parts.Replacment parts will not be sent until photographic evidence has been provided to Rattan Ebike.
Rattan Ebike may request additional documentation (such as video) to assist with accurately diagnosing the problem and processing the warranty claim.
Services
If you notice any problems under the warranty with your bike,
please contact us at
info@rattanebike.com
with the Following Information:
- Platform of the purchase, such as Amazon, Brand Store, etc. ( If purchased on Amazon, Please also include the seller name on your order) Order number/ID
- The email and shipping address you used when placed order Pictures/Short videos of the problems and a brief description of the problems
DISCLAIMER
Ebike performance will vary with rider weight, cargo weight, rider /cargo shape (both contribute to drag), terrain, tire pressure, brake adjustment, throttle vs PAS usage, pedal power, battery charge level, ambient temperature and wind conditions.
Rattan E-bike should be operated in accordance with the Rattan Ebike manual provided with the bike. The warranty will be activated automatically from the date of shipment in a period of one year when Rattan E-bike used in accordance with the user manual. All other obligations and conditions or liabilities, including obligations for consequential damages are hereby excluded.Damage caused by failing to adhere to instructions and warnings issued by Rattan Ebike is not covered under warranty.
We will replace any parts deemed to have been damaged during shipping. Shipping damage must be reported to Rattan Ebike within 14 days of shipment arrival. This applies to all products including bikes and accessories. You will NOT be refunded as compensation for your time or efforts replacing damaged parts. Replacement parts will not be sent until photographic evidence has been provided to Rattan Ebike.
Rattan E-bike may request additional documentation (such as video) to assist with accurately diagnosing the problem and processing the warranty claim.
For warranty services, please contact Rattan Ebike online support by email atinfo@rattanebike.com. Bikes or parts returned without proper documentation may result in delayed service or denied warranty coverage. All unauthorized returns will be refused.
Damage as a result of an accident is not covered under this warranty, and Rattan Ebike is not esponsible for repair or replacement of damaged bikes or parts.
Rattan Ebike reserves the right to change the warranty at any time and without notice.
Under no circumstances is Rattan E-bike responsible for any damage resulting from damaged,defective, or improperly secured parts. This includes,but is not limited to, damage to personal property,personal injury, or death.
THANKS FOR SHOPPING WITH US
Let’s keep riding to keep our planet clean and green
FOR MORE PRODUCT
References
- Ebike | Electric Bike | Power Bike | Electric Fat Bike | Rattan Ebike
- Ebike | Electric Bike | Power Bike | Electric Fat Bike | Rattan Ebike
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>