Rattan A00281-GRBL Medium Lounger Set User Manual
- June 10, 2024
- RATTAN
Table of Contents
A00281-GRBL Medium Lounger Set
User Manual
USER S MANUAL
MEDIUM LOUNGER SET
A00281-GRBL
A00281-GRBL Medium Lounger Set
Contact Us!
Need Help! Do NOT return this item.
Contact our friendly customer service department for help first.
Before You Start
Please do not exceed the weight limitation of each items
Do not stand on or use any part of this item as step ladder
Read each step carefully before starting. It is very important to ensure each
step followed in correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to
make sure all parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will
be used.
Keep the handrolls close at hand. Do not use power tools to assemble your
furniture. They may scratch or damage the parts.
Manufacturer and seller expressly disclaim any and all liability for personal
injury, property damage or loss, whether direct, indirect, or incidental,
resulting from incorrect attachment, improper use, inadequate maintenance, or
neglect of this product.
To entitle refund, all return must in its original product packaging with all
accessories are included. Pictures return may required as evidence and the
responsibilities will pass to us until the item has been received by our
side. All returned fee under customer’s expense.
Notice:
- 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
- Place the item on a flat ground to adjust and make sure it remains stable.
- Tighten up all screws with tools gradually.
- If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
- If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again.
- Note : If one or some screws are fully tightened during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.
Part List & Hardware
STEP 1
Connect Back Frame (Al) & Seat Frame (DI) with Bolt (1) & Nut M6 (5)| STEP 2
Connect part from STEP 1, Panel Frame (P) & Panel Frame (C2) with Bolt (3)
---|---
|
STEP 3 Connect part from STEP 2 & Panel Frame (P1) with Bolt (3)| STEP 4
Connect part from STEP 3 & Rain Cover (0)
|
STEP 5 Connect part from STEP 4 & Bottom Frame (NI) with Bolt (2)| STEP 6
Connect part from STEP 5 & Sofa Leg (12) with Bolt (4)
---|---
|
Put on Seat Cushion (6) & Back Pillow (8) to complete.
STEP 7 Connect Right Frame (El) & Left Frame (F1) with Bolt (1) & Nut M6 (5)|
STEP 8 Connect part from STEP 7 & Seat Frame (H1) with Bolt (1) & Nut M6 (5)
---|---
|
STEP 9 Connect part from STEP 8 & Panel Frame (C2)| STEP 10 Connect part from
STEP 9 & Panel Frame (P1) with Bolt (3)
|
STEP 11 Connect part from STEP 10 & Rain Cover (0)| STEP 12 Connect part from
STEP 11 & Bottom Frame (NI) with Bolt (2)
---|---
|
STEP 13 Connect part from STEP 12 & Sofa Leg (12) with Bolt (4)| Put on Seat
Corner Cushion (7), Big Corner Pillow (9), Small Corner Pillow (10) to
complete
|
STEP 14 Connect Right Frame E (E) & Left Frame (F) with Bolt (1) & Nut M6 (5)|
STEP 15 Connect Panel Frame B (B) & Panel Frame G (G) with Bolt (3)
---|---
|
STEP 16 Connect part from STEPS 14 & 15 with Bolt (2) & (3)| STEP 17 Connect
part from STEP 16 & Seat Frame (H) with Bolt (1),Nut M6 (5) &(3)
|
STEP 18 Connect part from STEP 17 & Sofa Leg (12) with Bolt (4)| STEP 19 Put
on Seat Corner Cushion (7), Big Corner Pillow (9), Small Corner Pillow (10) to
complete
---|---
|
STEP 20 Connect Table Top Frame (I), Panel Frame C (C) Panel Frame B (B) with
Bolt (3)| STEP 21 Connect part from STEP 20 & Panel Frame B (B) with Bolt (3)
|
STEP 22 Connect part from STEP 21 & Panel Frame C (C) with Bolt (3)| STEP 23
Connect part from STEP 22 & Sofa Leg (12) with Bolt (4)
---|---
|
STEP 24 Put on Table Glass (11) to complete table.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Further advice about wood furniture care
Please protect your outdoor furniture with a cover when not in use since Long-
term sunlight exposure will result in the damage on the surface.
In addition to sunlight damage, wood and metal frame suffers when exposed to
extremes in temperature and humidity.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.