ANKER A2524 PowerWave Stand User Manual

: June 15, 2024
: Anker

Table of Contents

ANKER A2524 PowerWave Stand
Product Information
Product Usage Instructions
Important Safety Instructions
FCC Statement
Specifications
LED Indicator
Declaration of Conformity
FAQs
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER A2524 PowerWave Stand

ANKER-A2524-PowerWave-Stand-product

Product Information

Specifications:

Input: 5V 2A / 9V 2A
Output: 10W Max
Radiated H-Field: [Not mentioned in the text]

Product Usage Instructions

LED Indicator:
The wireless charger’s LED indicator provides important information about its status. The following are the different LED indications and their meanings:

LED Indicator	Status
Solid blue for 3 seconds, then off	Connected to power
Solid blue	Charging mobile device
Flashing blue	Metal objects detected
Flashing green	Incompatible AC adapter or cable connected

Important Safety Instructions:
It is essential to follow these safety instructions to ensure proper usage and prevent any potential hazards:

Avoid placing any metal objects on the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, as it may cause overheating.
Avoid connecting the wireless charger to a USB port on a computer as it may affect the wireless charging function.

FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.

IC Statement:
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body.

Radio Standards Specification RSS-Gen, issue 5:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

FAQ:
For more information and frequently asked questions, please visit https://www.anker.com/support.

Important Safety Instructions

Avoid dropping.
Do not disassemble.
Do not expose to liquids.
For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature during use of this product must not exceed 40°C.
Open flame sources, such as candles, must not be placed on this product.
Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.

Product Name: PowerWave Stand
Model: A2524

The following importer is the responsible party.

Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (909) 484 1530

IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body.

Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Specifications

ANKER-A2524-PowerWave-Stand-fig-1

LED Indicator

LED Indicator	Status
Solid blue for 3 seconds, then off	Connected to power
Solid blue	Charging mobile device
Flashing blue	Metal objects detected
Flashing green	Incompatible AC adapter or cable connected

Using an ultra-thick protective phone case or a case with a magnetic/iron plate is not recommended as it may affect the wireless charging function.
Do not place any foreign objects between your smartphone and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, as it may cause overheating.
Do not connect the wireless charger to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product complies with Directives 2014/53/EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.anker.com
To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product complies with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.
To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importers are the responsible parties (contract for EU and UK matters)

Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany

Anker Technology (UK) Ltd
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.