ET2 Contemporary Lighting E25002 9.75 Inch Satin Brass Single Pendant Ceiling Light Installation Guide
- June 15, 2024
- ET2 Contemporary Lighting
Table of Contents
ltem/Model
Number: E21484
INTERVAL LED MEDIUM ELLIPSE PENDANT Lamping
Ampoule: LED Integrated 30W
Please consult a qualified electrician prior to install
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not
to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach or small children.
Choosea clean,level, spacious assemblyarea.
Avoid hard surfaces thatmay damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lfting. Assemble the product in dose proximity to where you
intend to install it.
Donot over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet
before assembly and using the product.
Caution thereisa riskof shock!
Disconnect from power source before assembling orcleaning.
Switch off, unplug and allow bulb to cool before replacing bulb o cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Check the product cord to be sure s free tor or frayed.
WARNING: Wires must to be connected to low Voltage driver and should not
be connected directly to live wire or a short may occur.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate deansers, i glass cleaner,
stone polish, & wood polish.
Clean with soft doth and a mild detergent. Do not use abrasive or harsh
deaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposuretoheat sourcesmay cause glazing, meltingandscorching, oreven
cause color to fade.
PARTS
Before getting started,ensure the package contains the following
components:
This fixture is equipped with an LED driver, please refer to the
Wiring Diagram for more details 
WIRING DIAGRAM
DIMMER COMPATIBILITY
MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS. 
SCHEMATIC FOR GENERAL REFERENCE
ONLY
FOR OPTIMAL USE, VERIFIED DIMMERS INCLUDE
Lutron Diva DVCL153P
Lutron Diva DVELV-300P
DEAKO-Smart Dimmer
DEAKO-Single Dimmer
Lutron Caseta PD-6WCL
Leviton 6672-L
Eaton DALO6P
NOTE:
Triac & ELV dimming is ONLY compatible at 120V
IMPORTANT!
If the controlis nslt p;ired properly to LED fixtures, irreparable damage may
occur.
If the dimmer you are using is not listed here, consult a lighting
professional or view our Dimming Compatibility Chart online:
www.et2online.com
© 2023 ET2 CONTEMPORARY LIGHTING
Made in China
Documents / Resources
| ET2
Contemporary Lighting E25002 9.75 Inch Satin Brass Single Pendant Ceiling
Light
[pdf] Installation Guide
E21486-SBR, E25002, E25002 9.75 Inch Satin Brass Single Pendant Ceiling Light,
9.75 Inch Satin Brass Single Pendant Ceiling Light, Satin Brass Single Pendant
Ceiling Light, Single Pendant Ceiling Light, Pendant Ceiling Light, Ceiling
Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>