Aurora AM102 Shiatsu Foot Massager User Manual
- May 15, 2024
- Aurora
Table of Contents
Aurora AM102 Shiatsu Foot Massager
IMPORTANT SAFETY INSTRUCTIONS
When using the Aurora Shiatsu Foot Massager with Heat, basic safety precautions as listed below should always be followed. Read all instructions before using the equipment.
DANGER
TO reduce the risk Of electric shock:
- Always unplug the massager from the electrical outlet immediately after using and before cleaning.
- Do not reach for a device that has fallen into the water. Unplug immediately.
- Do not use it while bathing or in a shower.
- Do not place, store, or drop the massager into water or other liquid.
WARNING
To reduce the risk Of burns, fire, electric shock, or injury to individuals:
- The massager should never be left unattended when plugged in. Unplug from the outlet when not in use and before putting on or taking off parts.
- Do not operate under a blanket Or pillow. Excessive heating can occur and cause fire, electric shock, or injury to individuals.
- Children should not be near nor use this massager without adult supervision.
- Keep children away from extended foot support.
- Use the massager only for its intended use as described in this manual.
- Do not use attachments that are not recommended by the manufacturer.
- Never operate this massager if it has a damaged cord or plug if it is not working properly, or if it is dropped into water. Please return the massager to a service center for examination and repair.
- Do not carry the massager by supply cord or use the cord as a handle.
- Keep the cord away from the heated surfaces.
- Never operate the massager with broken attachments.
- Do not use steel wool, abrasive cleaning agents, or corrosive liquids such as gasoline or acetone to clean the product.
- Never use a damp cloth anywhere on the massager.
- Do not store massager near heat sources Or open flames.
- Do not leave and/or expose the massager to sunlight for extended periods Of time.
- Do not apply medical or cosmetic creams on the product Or On your body before using the massager.
- Do not use the heat function if you are sensitive to heat.
- It is not recommended to use this product for more than 15 minutes per session.
- This product is intended for personal use, not for commercial or industrial purposes.
- Do not operate the appliance with the air openings blocked. Keep the air openings free of lint and hair.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- TO disconnect, turn all controls to the Off position. Then remove the plug from the outlet.
CAUTION
- Stop the operation immediately if the heat becomes too intense or if your skin becomes uncomfortable.
- Persons with any of the conditions listed below should consult with their physicians before using the massager:
- Pregnant women are people who are ill or in poor physical shape.
- People suffering from back, neck, shoulder, or hip pain.
- People who have a pacemaker, defibrillator, or other personal medical devices are prone to electronic interference.
- People suffering from heart disease.
- People who are prohibited by a physician from receiving massage due to thrombosis or aneurysm, acute varicose veins, or other circulatory disorders.
- People with irregular curvatures Of the spine.
- People suffering from any physical ailment whose ability to operate the controls would be limited.
- Never tamper with or operate the massager with a damaged cord. If the cord becomes damaged during use, stop immediately! Contact the dealer or manufacturer. DO NOT dismantle or attempt to repair the massager yourself.
- This product is designed for indoor use only.
- DO NOT use the massager for more than 15 minutes at a time during any given use. Extensive use may lead to overheating and a shorter life span of the product.
- Should overheating occur, discontinue use immediately and allow the unit to cool before attempting to operate.
- When unplugging, always hold the socket. DO NOT pull the cord.
- Allow one hour Of rest following any meal prior to use Of the massager.
- Use Of this massager should be pleasant and comfortable. Should you experience any pain or discomfort, discontinue use and consult your physician.
- TO avoid overheating and/or damage to the massager, please allow a rest period Of 20 minutes in between uses.
PRODUCT ILLUSTRATIONS
- Control Panel
- Foot Slot
- Cloth Cover
- Foot Pad
- Stand
Control Panel
- A. On/Off button
- B. Massage Modes
- C. Intensity Levels
- D. Heat Therapy
FUNCTION DESCRIPTIONS
The key functions are as follows:
| NO. | Button | Function | Indication |
|---|
A
| | Press to turn ON. The default mode is set to low intensity and heat therapy. Press again to
turn OFF.
|
Power ON: Red light Mode: Blue light Intensity: Blue light Heating: Red light
B
|
|
3 Massage modes
| Mode1: Blue light Mode2: Yellow light Mode3: Blue & Yellow
light
C
| |
2 Levels of intensity
| Low intensity: Blue light High intensity: Red light
D
| |
Heat therapy of the soles
| Heat therapy ON: Red light
Heat therapy OFF: No
light
Auto Timer: 15 minutes. Power will turn off automatically after 15 minutes to prevent overheating.
Always unplug the AC power cord after use.
TROUBLESHOOTING
This page summarizes the most common problems or issues that you may have with the product. If you are unable to solve the problem, please contact us at service@aurorahealthbeauty.com.
| PROBLEM | POSSIBLE CAUSE | SUGGESTED SOLUTION |
|---|
Product does not work
|
Not plugged in properly
| Ensure the correct voltage is being used for the product and try plugging it back in.
Product does not work
|
Product went from a session to standby mode
| You may press the On/Off button for another session (not recommended for consecutive sessions for an individual).
The product does not work
| Continuous use of the product after each 15-minute session followed by more sessions; the product may have gone to overheat protection mode|
Unplug and allow the product to cool down for a minimum of 60 minutes before trying to use it again.
The product does not work
| An excessive load has been applied to the product| Reduce the excessive load and try to start again.
The product is abnormally warm or hot
|
The product most likely has been overused
| Unplug the product and let it cool down before attempting to use it again.
Noise can be heard from the product
|
Noise is made by the mechanical parts of the product
| Noise is normal and doesn’t mean the product is faulty. If you notice a difference in noise, please contact us.
CARE AND MAINTENANCE
Cleaning
- Unplug from the power outlet
- Wipe with a dry cloth to clean the product
- Do not use a damp cloth or detergent
- Do not use steel wool, abrasive cleaning agents, or corrosive liquids such as gasoline or acetone to clean the product.
Storage
- Unplug from the power outlet
- Store the product in a cool dry place away from sunlight
- Do not put a heavy weight load on the product
If the cover is damaged or there is any mechanical failure, please stop using the product. Contact the authorized service center in your region immediately.
PRODUCT SPECIFICATIONS
Name of Product
| ****
Shiatsu Foot Massager with Heat
---|---
Model Number
| ****
AM102
Type of Product
| ****
Foot Massager
Power Consumption
| ****
35W
Power Input
| ****
AC 100-240V/50-60Hz
Auto Timer
| ****
15mins
Product Dimension (L x W x H)
| ****
16.7 in x 15.4 in x 9.5 in
Product Weight
| ****
12.13 lbs
WARRANTY AND CUSTOMER SUPPORT
For questions, assistance, support, or warranty claims, please contact us at the email address below along with information on where you purchased the product. A copy of your sales receipt/invoice should always be included for proof of purchase. Send all inquiries to: service@aurorahealthbeauty.com This product comes with an I-Year Limited Warranty. For more details on our warranty please check the Aurora Health and Beauty website: www.aurorahealthbeauty.com
Thank you for purchasing an Aurora Health and Beauty product.
FREQUENTLY ASKED QUESTIONS
How does the Aurora AM102 Shiatsu Foot Massager deliver a powerful massage experience?
The massager has 8 rolling nodes that can massage deep into your muscles.
What technology does the portable massager use for a snugger fit, and how is it implemented?
The massager utilizes air compression technology with cloth-covered slots for a snugger fit.
What additional comfort feature does the Aurora AM102 Shiatsu Foot Massager offer, and how is it activated?
The massager has infrared heating for added comfort, and users can turn on the heating feature to relax muscles during the massaging process.
How are the controls of the Aurora AM102 Shiatsu Foot Massager designed for ease of use?
Controls are located toward the front of the machine, allowing users to easily manage heat (on and off), massage modes, and massage intensity.
What is the primary use of the Aurora AM102 Shiatsu Foot Massager, as mentioned in the information?
It is designed for use on the Feet.
What power source does the Aurora AM102 Shiatsu Foot Massager use?
The massager uses Corded Electric as its power source.
What is the weight of the Aurora AM102 Shiatsu Foot Massager?
The massager weighs 12.25 pounds.
What are the product dimensions of the Aurora AM102 Shiatsu Foot Massager in terms of length, width, and height?
The dimensions of the massager are 16 x 9 x 19 inches.
What is the special feature highlighted for the Aurora AM102 Shiatsu Foot Massager, contributing to its comfort?
The special feature is Heat, indicating the inclusion of infrared heating.
How many rolling nodes does the Aurora AM102 Shiatsu Foot Massager have for deep muscle massage?
The massager is equipped with 8 rolling nodes for deep muscle massage.
What technology is employed in the portable massager to provide a snugger fit, and where are the slots located?
Air compression technology is used, and the cloth-covered slots with this technology are present in the massager.
What is the purpose of the infrared heating feature in the Aurora AM102 Shiatsu Foot Massager?
The infrared heating feature is designed for added comfort and relaxation of muscles during the massaging process.
Where are the controls located on the Aurora AM102 Shiatsu Foot Massager, and what functionalities can be controlled?
The controls are located toward the front of the machine, allowing users to control heat (on and off), massage modes, and massage intensity.
How is the Aurora AM102 Shiatsu Foot Massager powered, and what source does it use for operation?
The massager is powered by Corded Electric.
What is the special feature mentioned regarding the Aurora AM102 Shiatsu Foot Massager's design for portability?
The massager has a Portable Design, and users can carry it anywhere with its integrated handlebar.
DOWNLOAD THE PDF LINK:Aurora AM102 Shiatsu Foot Massager User Manual