MUNBYN IMC09 Mixed Denomination Money Counter Machine User Manual
- June 15, 2024
- MUNBYN
Table of Contents
IMC09 Banknote
User Manual
Version 1.00
MORE CHOICE FOR YPUR GROWING BUSINESS
IMC09
Machine Overview
Unpack and Installation
2.1. What’s in the Box?
When you receive the package, open and check the packing list in the package.
| Item Name | Picture | Quantity (pc s) | Description |
|---|---|---|---|
| Banknote Counter | 1 | Banknote Counter | |
| External Display | 1 | External LED display screen with RJ12 cable | |
| Power Cable | 1 | Power supply cable of American standard | |
| Nylon Brush | 1 | Clean the machine | |
| Fuse | 1 | The backup fuse for the power protection | |
| IR Calibration Paper | 1 | Used for the IR calibration | |
| Dust Cover | 1 | Cover on the surface of the machine to prevent dust |
accumulation and machine failure
User Manual| | 1|
Table 2-1 What’s in the Box?
2.2. Installation
2.2.1. Installation Warnings
- This machine is specially designed for indoor use. Please do not install or use it outdoors.
- Please do not install it in place that cannot bear the weight of this product or in places that are inclined or uneven.
- Do not use or please combustible materials, inflammables and volatile items such as thinners around/inside this product.
2.2.2. Power Supply Connection
Display and Operational Interface
3.1. Display Appearance
3.2. Operational Instructions for Function Keys
| “A/M” button, press to choose MANUAL or AUTO counting mode.
In AUTO mode, counting will begin as soon as bills are placed in the hopper.
In MANUAL mode, counting begins when the user presses the “SATRT” button.
---|---
| “PRINT” button, after connecting the printer, press this button to print the
information about cash counting.
| “ADD” button, press to turn on/off the ADD function.
| “BATCH” button, press to turn on/off the BATCH function.
| “CUR” button, press to different currency counting.
| “MODE” button, press to switch between different counting modes:
MDC/SDC/CNT.
Long press this button to adjust the sensitivity of counterfeit detection.
| “DETAIL” button, press to check the counting result details
| “MENU” button, press this button to enter the user menu settings.
| “ESC” button, press to return to the previous interface.
| “START” button, press to counting or clear the current counting information.
Table 3-1 Function Keys
3.3. Display Interface
Operating Instructions
4.1. Start-up
Turn on the switch after connecting the machine to power supply. First, the
machine enters the startup interface, as shown in Figure 4-1.
When starting up, the machine will enter a self-checking state, please wait for about 15 seconds. Please do not insert any banknotes and ensure that there is nothing in the Hopper and Stacker.
4.2. How to Place Banknotes?
Placing neatly arranged banknotes into the hopper according to the following
steps can avoid jamming or false reporting. It is recommended to insert no
more than 150 banknotes at a time.
- Adjust the width of the banknote guider to match the width of the banknote currently being counted.
- Place the banknote following the steps below, allowing it to slide naturally into the Hopper.
4.3. Operating Modes
4.3.1. Auto/Manual Mode
IMC09 is set to automatically count notes by default. Press “A/W” button to
switch to manual counting.
In Auto mode, the IMC09 starts count automatically as soon as the bills placed
in the hopper.
In Manual mode, the IMC09 will not start counting automatically; you must
press the “START” button to begin each count. 4.3.2. Counting Mode(CNT)
As shown in the figure 4-4, IMC09 has no anti-counterfeiting function in CNT
mode, and only calculates the number of banknotes. Placing additional bills in
the hopper:
Please be sure the stacker does not accumulate more bills than it can hold
(150 PCS), as this will cause jamming, and may lead to a motor failure.
4.3.3. Sorting Mode(SDC)
As shown in Figure 4-5, the IMC09 is in SDC mode. In this mode, the IMC09 will
count banknotes of the same denomination as the selected currency. The first
banknote counted will serve as a reference, and the device will also save
detailed information about the counted banknotes. This information includes
the total amount and the total number of banknotes in the stacker, which
allows users to easily verify the count.
4.3.4. Mix Mode(MDC)
As shown in Figure 4-6, the IMC09 is in MDC mode. In this mode, the IMC09 will
count all denominations of the selected currency’s banknotes, while
simultaneously saving the detailed information of the counted banknotes. This
information includes the total amount and the total number of banknotes in the
stacker, making it convenient for users to review.
4.3.5. Batch Mode
Press the “BATCH” button to sequentially change the BATCH number:
0-20-50-100-150, or press the “A/M” / “PRINT” button to increase or decrease
the BATCH number.
The machine will start counting automatically once bills are placed in the
hopper. As soon as the machine counts the desired batch quantity, it will
stop. The screen will show the number of bills in the stacker.
When the stacker is emptied, the machine will automatically start counting the
next preset batch quantity.
4.3.6. ADD Mode
After turning on the ADD mode, the number and amount of banknotes counted will
accumulate continuously. Pressing the ESC button can clear the current data to
record new counting data.
4.3.7. Currency Mode Selection
Press “CUR” button to enter Currency interface, press the “A/M” / “PRINT” to
select currency.
4.3.8. Print Data
After connecting the printer, press PRINT button to print the information
about counting data.
4.3.9. Authentication level
Long press the MODE button to adjust the sensitivity of counterfeit detection.
Settings
Press the “MENU” to enter the user menu interface.
Use the & button to select an option, press the “MENU” or “START” key to
confirm the selection.
5.1. Service Menu
Press the key to enter service menu, you will be requested to input a password
with the following interface. The default password is 9999. After input the
password, the interface showed in Figure 5-3 will be displayed.
Use the cursor to select with sub-menu you want to enter, and press MENU
button to confirm, and press ESC button to quit.
5.1.1. Read Sensor Values
As shown in Figure 5-4, the sensors values are only for engineer to check whether any sensor has a malfunction. If you meet any problem about use, please take a photo of this page and contact us.
5.1.2. IR Calibration
If you meet cases about banknote detection errors, please try to calibrate the CIS. The CIS calibration steps are shown in Figure 5-5. For more detail instruction, we recommend you to see the reference manual or watch the video: http://u.pc.cd/qRsctalK
5.1.3. MG/MT Waveforms
5.1.4. Function Setting
To enter the Function Setting interface by press the key, as shown in the
following figure.
Use the cursor to select with sub-menu you want to turn on/off, and press MENU
button to confirm, and press ESC button to quit.
5.1.4.1 KEY BEEP
Move the cursor to the KEY BEEP option, press the MENU button to turn on or
off the key beep.
5.1.4.2 WARNING BEEP
Move the cursor to the WARNING BEEP option, press the MENU button to turn on
or off the warnning beep.
5.1.4.3 BATCH NO CLEAR
After turning on this setting, the data of the previous batch will not be
clear, and will be accumulated to the next batch.
5.1.4.4 PRINTER BAUD RATE
Switch the baud rate of the IMC09 serial port to 9600 or 115200.
5.1.5. Auto Diagnostic
This is for production and professional servicing purpose.
5.1.6. PCS Counted and Reset
This is to tell you the total quantity of counted bills in this counter since last time clearing to zero.
5.1.7. Acquire CIS image
This is for servicing purpose.
5.1.8. Detection Level
As shown in Figure 5-11, you can use the left and right direction key to
select, and up and down direction key to change the sensitivity levels.
The currency code in the right part is indicating for which currency you are
operating.
Note:
Please do not change without communicating with us.
5.1.9. Back to Default setting
As shown in Figure 5-13, press the menu key to reset all of the settings you
changed before.
5.2. Version Information
You are available to check the version information.
5.3. Time Setting
As shown in Figure 5-15, you can set the date or time according to your preference.
5.4. Language Selection
You are available to set the language you want.
Software Upgrade
U-disk upgrade method is adopted for the software upgrade of this product. Please upgrade the software according to the following steps.
-
The upgrade file needs to be moved to the root directory of the U-disk.
(please do not change the file name or format of the upgrade file, and there cannot be two or more upgrade files in the root directory of the U-disk). -
Insert the USB disk into the USB interface at the rear of the machine.
Make sure the power is off before insert the U-disk. -
Turn on the counter, and the machine will automatically recognize the upgrade file. Upon successful recognition, the machine will read the file first.
-
And program the file to the counter.
-
After finish the programming, unplug the USB disk and turn off the machine.
-
Turn on the machine to enter the main interface. Software upgrade has been finished.
Maintenance and Troubleshooting
7.1. Error Code and Solution
The description of the error codes and the related handling methods are shown
in table 7-1.
Table 7-1 Error Code
| Code | Error Description | Handling Method (Recommendation) |
|---|---|---|
| El | Bill UV sensor error | Remove the banknote, clean the UV sensor |
| E2 | Bill double error | If the errors occur frequently, adjust the |
| E3/E8 | Chain notes error | If the errors occur frequently, adjust the screw |
toward the anti-clockwise to decrease the feeding gap.
E4| Half notes error| Remove the banknote
EIO| Image Error| Clean the IR sensor, and calibrate the IR
Ell/E12| Denomination Error| Remove the banknote,clean the IR sensor; Perform
the IR sensor calibration;
Collect the data of the banknote.
El3| Face Recognition Error
El4| Size Recognition Error
0.00E+00| MT Error| Remove the banknote, clean or replace the MG sensors
0.00E+00| MGI Error
0.00E+00| MG2Error
0.00E+00| MG3 Error
0.00E+00| MG4error
E30-E61| IR Error| Remove the banknote,clean the IR sensor; Perform the IR
calibration;
Collect data of the banknote.
Generally speaking, most of the above errors be caused by dust or dirt inside of the machine, so keeping the machine clean is highly recommended.
7.2. Hopper Plate Adjustment
When banknote feeding is unsmooth or banknote counting is inaccurate, it can
be solved through adjusting the vertical adjusting screw as well as the gap
between resistance rubber and rubber wheel. Then you can put in a banknote and
hold, if you feel the pull, the machine is workable.
Turn it clockwise to decrease gap in order to add friction (tight).
Turn it anticlockwise to increase gap in order to reduce friction (loose).
7.3. Common Trouble and Solution
Before repair, please check the problems as below.
NOTE:
Before troubleshooting, please turn off the power switch and unplug the
outlet.
Table 7-4 Common Trouble and Solution
Not working
Check if the plug is well inserted into socket|
Check if the power fails or fuse burn out|
Fail to start or stop normally
Feeding Sensor covered in dust?
Clean|
Counting Error
Hopper position adjusted improperly?|
Scan the QR code for Facebook online chat
https://www.facebook.com/munbyn/
MUNBYN provides 18 months warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUNBYN team
to promptly receive troubleshooting tips or a replacement.
Contact us
Email: support@munbyn.com
(24-7 online support)
Website: www.munbyn.com
(how-to videos, warranty details)
WhatsAPP ： +8617817881067
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the fo llowing two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device , pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protec tion against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruct ions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the fo llowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>