MAXXTER ACT-BTHS-03 Bluetooth Stereo Headset User Manual
- June 6, 2024
- MAXXTER
Table of Contents
MAXXTER ACT-BTHS-03 Bluetooth Stereo Headset User Manual
Features
- Bluetooth stereo headphones with built-in microphone
- Up to 250 hours of standby time and about 5 hours of listening time
- Automatically mutes your music in case of incoming calls
- Multifunction button, volume control ,Previous/Next track
- LED status indicator
- Comfortable ear cushions and adjustable headband
Specifications
- Bluetooth Version : v.5.0
- Bluetooth frequency range: 2.4 GHz – 2.4835 GHz
- Transmitting power: < 5 dBm
- Supported profiles: HSP, HFP, A2DP and AVRCP
- Recharging time: approx. 2 hrs
- Operation distance: up to 10 m in the open air
- Speaker diameter: 40 mm
- Speaker frequency response: 20 Hz – 20000 Hz
- Sensitivity:102 +/-3dB at 1KHZ
- Impedance: 32 Ohm +/-15%
- Battery: 150 mAh Li-Polymer
- USB charging cable length: 0.5 m
- Audio cable length: 1 m
- weight :168 g
OPERATING
First, make sure Bluetooth is turned on for the device you wish to pair.
KEY FUNCTIONS
Power switch/ Receive/ Hang up phone call, Redial
Press for 2-3 seconds to power on, the blue and red indicators take turns
flashing. Search for the device name “ACT-BTHS-03” and connect.
Power off: Press for 2-3 seconds to power off.
When receiving a phone call, press it to answer the call, press it again to
end the phone call.
Long press for 2 seconds to reject the phone call.
Short press twice to re-dial the last phone number you called.
In music mode, press it 1 time to pause, and press it again to play.
+ Volume Up
In Music Mode, press the button to increase the volume.
– Volume Down
In Music Mode, press the button to decrease the volume.
< Previous song
In Music Mode, press the button to previous song.
> Next song
In Music Mode, press the button to next song.
CHARGING
This headset is equipped with a built-in non-detachable, rechargeable battery.
Please make sure that the battery is charged fully for first time use.
Connect the charger to the charging port. Insert the charger into a standard
USB charging port. While charging, indicator light will turn Red. When fully
charged, the red LED indicator will be off. It can reduce the battery
performance with repeated long term overcharging.
Please do not dial or receive phone calls while charging.
Warnings
Declaration of conformity
This product is tested and complies with the essential requirements of the
laws of member states concerning
RED (2014/53/EU), RoHS (2011/65/EU). The CE declaration can be found under
www.maxxter.biz