easee Charge Core Charging Robot 22kW Instructions

: June 15, 2024
: easee

Table of Contents

Charging Robot
Important product information
Intended use
Operating conditions
WARNINGS AND CAUTIONS
WARNING
CAUTION
Additional important information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

easee Charge Core Charging Robot 22kW

Charging Robot

Charge Core
Charge Lite
One
Plug & Play and Ready

Important product information

The information in this leaflet applies to all Easee Charging Robots (Charge Core, Charge Lite, One, and respective Plug & Play versions) and Easee Ready, unless specified otherwise. Keep this information for future reference.

Read this information carefully before installing and operating the product. The Installation guide and User guide are an integral part of the product documentation. All information is available online at easee.com/manuals.
Keep this information for future reference.

Installation of this product requires a mobile device with NFC or Bluetooth support. Operation of the product using the app features requires a mobile device with Bluetooth support.

Intended use

The Charging Robot is intended for AC charging of electrically-powered vehicles equipped with non-gassing batteries. It is intended for indoor or outdoor use. The specifications comply with the properties of the electrical grid and the electrically-powered vehicle, and the ambient conditions. The connection to the vehicle is using a global standard type 2 cable.

The AC input to the product is intended for a hardwired installation that complies with local and national regulations.

If installed with other chargers of the same model it is additionally intended to communicate with the other chargers to prevent overloads by balancing the power used in charging multiple electrically-powered vehicles at the same time.

If you use the product in any way other than described in the related documentation, it could result in damage to property, injury, or possibly death.

Charge Lite is a home-charging device manufactured and designed strictly for residential use only. Charge Lite chargers shall not be used for non- residential use. Residential use is to be understood as use in or around an individual’s own residence. The Charge Lite charger at all times must make use of an individual’s private connection to the electricity grid. Charge Lite chargers cannot be used for charging electric vehicles for which reimbursement is desired, based on the realized consumption of electricity. The Charge Lite charger cannot be used to calculate this consumption. Easee Ready is intended solely as a prepared charging point for an Easee Charging Robot.

Operating conditions

The Charging Robot shall only be used with a charging cable according to IEC 62196 and IEC 62893. The product must be firmly mounted on a vertical unperforated wall or structure that covers the entire back side of the product and has a sufficient load-bearing capacity. It may only be operated within the approved operating parameters (see Technical specifications in the Installer guide). Safety instructions

WARNINGS AND CAUTIONS

A Warning indicates a condition, hazard or unsafe practice that can result in serious personal injury or death.

A Caution indicates a condition, hazard or unsafe practice that can result in minor personal injury or damage to the product.

WARNING

This product shall only be installed, repaired or serviced by an authorised electrician. All applicable local, regional and national regulations for electrical installations must be respected.
Danger to life due to high electrical voltage. Never make any changes to components, software or connected cables.
The installation must not be carried out in the vicinity of explosive atmospheres or in areas where there is a risk of flowing water.
The terminals in the backplate are energised when the power circuit is closed and must never be in direct contact or in contact with anything other than the plug-in electronics (Chargeberry).
Never use or touch the product if it is damaged or does not function properly.
In case of a critical error, the charger will alert the user with a warning sound and flashing red light on the light strip. Turn off the power and remove the charging cable from the Charging Robot. The power can then be turned back on if necessary. The flashing red light will continue, but the warning sound will stop when the charging cable is disconnected. The charger is blocked from further use, cannot be reset and has to be replaced. Contact customer support.

CAUTION

If a fire occurs, use CO2 for extinguishing. To extinguish it with water or foam, the system must be first de-energized (electrically disconnected).
Never clean the product with high pressure or running water.
Do not immerse the product in water or other liquids.
Never touch the contacts of the Type 2 socket and never insert foreign objects into the product.
Never use the charging cable if it is damaged or if the connections are wet or dirty.
Do not use extension cords or adapters in combination with the product.
Avoid direct sunlight for optimal operation in all weather conditions.
Do not use the product near strong electromagnetic fields or in the direct vicinity of radio transmitters.
The product must be installed on a permanent location.
The connections of the Charge berry and backplate are designed for a limited number of plugging cycles.
Make sure that children do not play with the product.
Make sure the charging cable does not cause a tripping hazard or risk being run over by a car.
The charging cable must only be removed from the Charging Robot by

Additional important information

Simplified Declaration of Conformity

Hereby, Easee ASA declares that Charge Core, Charge Lite and Plug & Play defined in this manual are in conformance with the EU Radio Equipment Directive 2014/53/EU and RoHS Directive 2011/65/EU.

Hereby, Easee ASA declares that Easee Ready is in compliance with the Low Voltage Directive 2014/35/EU and RoHS Directive 2011/65/EU.

Hereby, Easee ASA declares that Easee One and Charge Core defined in this manual and sold in the UK after January 2023 are in compliance with the UK Radio Equipment Regulations 2017 and RoHS regulations 2012.

The full text of the EU Declaration of Conformity is available at: easee.com/DoC

The full text of the UK Declaration of Conformity and the UK Smart Charging Regulations Statement of Compliance and Technical File are available at the following internet address: easee.com/manuals

Transportation

The product should always be transported within its original packaging. No other items should be stored on top of the box other than Easee chargers. Should the box be dropped or otherwise impacted, a visual inspection should be done in order to verify potential damage.

Storage

The electronics are sealed and will not get damaged if stored in humid areas. However, in order to preserve the packaging and its contents, we recommend storage in a tempered, dry and well-ventilated area. Relative humidity should not exceed 80% and no corrosive gas should be present. Storage or transportation environment must never exceed the limits provided in the Technical specifications.

Dismounting

Perform a factory reset of the device before powering it down. This is done via the Installer App. Dismounting of the backplate shall only be performed by an authorised electrician. The power supply to the charger must be isolated before dismounting starts. Use the installation guide and follow the steps in reverse in order to dismount the product in the correct order.

Data protection

When the product connects to the Internet, personal data is sent to Easee ASA. You will receive more information about data protection during the configuration of your Charging Robot.

Waste handle

A crossed-out dustbin (WEEE symbol) indicates that a product and its accessories must not be disposed of in household waste at the end of their lifecycle.
For the return of old devices, free collection and acceptance points may be available in your vicinity. Observe local regulations for correct and environmentally friendly disposal. If the old electronic equipment contains personal data, you are responsible for deleting it yourself before returning it.

Warranty

The device is free from material defects and is in accordance with laws and regulations for consumer protection in the country where the product is purchased. All correctly installed Easee hardware is covered by our 3 years

limited warranty. If your charger needs to be repaired within this warranty period, please contact your Easee supplier. Further information can be found at easee.support.
Some countries may have extended warranty.

Returns and complaints

Contact your distributor or Easee Customer Support regarding the return and complaint of your product.

Customer support

Download the latest manuals, find answers to frequently asked questions and useful documents and videos for your
product at easee.support.

Max transmitted power

The information in this document is for information purposes only, is provided as is, and may be subject to change without notice. Easee ASA, including its subsidiaries, does not accept any liability for the correctness or completeness of the information and illustrations, and is not liable or responsible for your considerations, assessments, decisions or absence of such, or other use of the information in this document.

No part of this publication may be re-published, reproduced, transmitted or re-used in any other form, by any means or in any form, for your own or any third-party’s use, unless otherwise agreed with Easee or its subsidiaries in writing. Any permitted use shall always be done in accordance with good practice and ensure that no harm may be caused to Easee or by misleading the consumer.

Easee and Easee products, product names, trademarks and slogans, whether registered or not, are Easee’s intellectual property and may not be used without Easee’s prior written permission. All other products and services mentioned may be trademarks or service marks of their respective owners.

August 2023 – Version 1.01
© 2023 by Easee ASA. All rights reEasee ASA
Grenseveien 19 4313 Sandnes, Norwayserved.
WWW.easee.com