qtx 151.030UK PAR100 3in1 LED PAR Can User Manual

June 6, 2024
qtx

PAR100
3in1 LED PAR Can
Item ref: 151.030UK
User Manual

Please read through this manual thoroughly before use, any damage caused by misuse of the product will not be covered by warranty.
Thank you for choosing the PAR100, A lightweight and compact LED PAR that Can fit with 18 3-in-1 RGB LEDs. This unit can be controlled by auto, sound-to- light, master/slave programs or via DMX. A great value solution for background washes illumination.

In the box:
Your PAR100 should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent the risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.
Please do not open the cover, contains high voltage. This product is not serviceable or repairable by the end-user. Please refer to qualified personnel for service and repair.
Placement:

  • Use the included mounting bracket to fix to a stand or lighting truss
  • Keep away from damp or dusty environments
  • Ensure adequate airflow around the fixture housings
  • Ensure adequate access to controls and connections

Cleaning:

  • Use a soft cloth with a neutral detergent to clean the casing as required
  • Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
  • Do not use strong solvents for cleaning the unit

Rear panel controls:

  1. Manual control buttons
  2. DMX Signal in
  3. DMX signal out
  4. LED display
  5. IEC power in (fused)
  6. IEC power out

Manual control menu:
Press the “MENU” button to enter the settings menu.
Press the “UP” and “DOWN” buttons to navigate through various setting functions.
Press the “ENTER” button to save the desired setting.

Menu Number range Function and description
A001 A001-A512 DMX512 address settings
ADYEN ADYE or ADno DMX512 Master on or off (Slave)
Reye Reye or REno Remote control on or off
AU01 AU01-AU07 Manual colour selection
FF00 FFOO-FF99 Colour jump setting (speed slow to fast)
--- --- ---
EE00 EE00-EE99 Colour fade setting (speed slow to fast)
CCOO CCOO-CC99 Colour pulse setting (speed slow to fast)
F0 F000-F255 Strobe setting (speed slow to fast)
SOUND SOUND Sound to light white strobe setting
SUND SUND Sound to light colour change setting
r000 r000-r255 Red dimming (0-100%)
G000 G000-G255 Green dimming (0-100%)
b000 b000-B255 Blue dimming (0-100%)

Remote control:

The PAR100 is supplied with an I.R. remote control for quick access to most of the basic functions of the unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum range of approximately 4-5m. Controls and functions are listed on the diagram below:

1. Power = Remote on/off
2. Auto = Colour jump open/off
3. Mode = Colour fade open/off
4. Flash = Strobe open/off
5. — = Decrease option setting
6. R = Red open/off
7. G = Green open/off| 8. Enter = Save option setting
9. Music = Sound to light colour change open/off
10. Motor = Manual colour select
11. + = Increase option setting
12. Dmx = DMX512 open/off
13. B = Blue open/off
14. W = No function on this model (achieve white by opening red, green and blue concurrently)
---|---

DMX mode:
The PAR100 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER” to confirm. This unit has 7 DMX channels as indicated in the table below:

Channel Value Function Setting
CHI 0-255 Master dimming (0-100%) Available in all modes
CH2 0-255 Red dimming (0-100%) Dimming modes only
CH3 0-255 Green dimming (0-100%)
CH4 0-255 Blue dimming (0-100%)
CH5 0-255 Strobe (speed slow to fast) Available in all modes
CH6 0-50 Open CHI-CH5
51-100 Colour select
101-150 Colour jump setting
CH6 (cont’d) 151-200 Colour fade setting
--- --- --- ---
201-250 Colour pulse setting
251-255 Open sound to light setting
CH7 0-255 Speed from slow to fast Available in all modes

Specifications:

Power supply 110-240Vac, 50/60Hz (IEC)
Power consumption 35W
Fuse rating T1.0A
LED quantity 18 x 1.5W 3-in-1
DMX channels 7
Illuminance 1700Iux @ 2m
Beam angle 25°
Projection distance 10m (approx.)
Dimensions 200x200x78mm (without Bracket)
Weight 1.17kg

Troubleshooting:

No power (mains) Check mains voltage is correct, and outlet is switched on

Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No light output| Check control panel mode settings
Check DMX settings from the controller (dimmer levels, blackout etc.)
Unresponsive to DMX| Check that unit is in DMX mode and ensure DMX address remains lit to confirm receiving DMX signal
Check DMX controller is not set to blackout
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/ cutting out| Ensure adequate ventilation and unit is not too close to a heat source

This product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd,
Unit 2 Bridgewater Park,
Taylor Road, Trafford Park,
Manchester. M41 7JQ.
AVSL (Europe) Ltd, Unit 3D
North Point House, North Point Bus.
Park, New Mallow Road, Cork, Ireland.
www.avsl.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals