8BitDo PS1 Retro Receiver Instruction Manual

8BitDo PS1 Retro Receiver

Models

PS1/PS2 console

• Please update the firmware of the PS receiver to the latest version

Dual Sense/Dual Sense Edge

Please update your DualSense/DualSense Edge to the latest version

Motion control, touch pad, adaptive triggers, haptic feedback, microphone, speaker, 3.5mm audio jack are not supported

1. With the controller off, press and hold Create + PS for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/ PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when connection is successful

Button mapping (PS1 / PS2 Controller)

DuaL Shock 4

• Motion control, touch pad, speaker, 3.5mm audio jack are not supported

1. With the controller off, press and hold Share + PS for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button of the PS receiver, status LED starts to blink rapidly
4. LEDs will become solid when connection is successful

Button mapping (PS1 / PS2 Controller)

Xbox One Wireless Controller/Xbox Series Wireless Controller/ Xbox Elite

Wireless Series 2/Xbox Elite Wireless Series 2-Core/ Xbox Adaptive Controller

• Please update your Xbox Wireless Controller to the latest version
• Impulse triggers, 3.5mm audio jack are not supported

1. Press the Xbox button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/ PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Bytton mapping (PS1/PS2 Controller)

Switch Pro Controller

• Please update your Switch Pro Controller to the latest version

1. With the controller off, press and hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

Wii U Pro

1. With the controller off, press and hold the Pair button to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

Ultimate Bluetooth Controller

• Please update your Ultimate Bluetooth Controller to the latest version

1. Turn the mode switch to Bluetooth
2. Press the home button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status
3. LED blinks rapidly (This is required for the very first time only)
4. Connect the PS receiver to the controller port of the PS1/PS2 console
5. Press the Pair button on the receiver, status LED starts to blink rapidly
6. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

Pro 2 Bluetooth Controller

• Please update your Pro 2 Bluetooth Controller to the latest version

1. Turn the mode switch to D
2. Press the Start button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/ PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

SN30 Pro+ Bluetooth Controller

• Please update your SN30 Pro+ Bluetooth Controller to the latest version

1. With the controller off, press and hold B + Start buttons to turn on the controller, then hold the Pair button forseconds to enter its pairing mode, the status LED rotates from left to right.(This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button of the PS receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

SN30 Pro Bluetooth Controller

• Please update your SN30 Pro Bluetooth Controller to the latest version

1. With the controller off, press and hold B + Start to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right. (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

SN30 Pro for Android

• Please update your SN30 Pro for Android to the latest version

1. Press the Xbox button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

Lite 2/Lite SE

• Please update your Lite 2/Lite SE to the latest version

1. Turn the mode switch to D
2. Press the home button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

Lite

• Please update the firmware of your Lite to the latest version

1. Turn the mode switch to X
2. Press the home button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

PS1 Mod Kit/PS1 Classic Mod Kit

• Please update your PS1 Mod Kit/PS1 Classic Mod Kit to the latest version

1. With the controller off, press X + start to turn on the controller, then hold the Select button for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (PS1 / PS2 Controller)

Arcade Stick

• Please update your Arcade Stick to the latest version

1. Turn the mode switch to X
2. Press the home button to turn on the Arcade Stick, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED starts to rotate clockwise (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/ PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

S Mode Button mapping (PS1 / PS2 Controller)

X Mode Button mapping (PS1 / PS2 Controller)

Windows

Dual Sense/Dual Sense Edge

Please update your Dual Sense/Dual Sense Edge to the latest version

Motion control, touch pad, adaptive triggers, haptic feedback, microphone, speaker, 3.5mm audio jack are not supported

1. With the controller off, press and hold Create + PS for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/ PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when connection is successful

Button mapping (Xbox Controller)

DuaL Shock 4

• Motion control, touch pad, speaker, 3.5mm audio jack are not supported

1. With the controller off, press and hold Share + PS for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button of the PS receiver, status LED starts to blink rapidly
4. LEDs will become solid when connection is successful

Button mapping (Xbox Controller)

Xbox One Wireless Controller/Xbox Series Wireless Controller/ Xbox

Elite Wireless Series 2/Xbox Elite Wireless Series 2-Core/ Xbox Adaptive Controller

• Please update your Xbox Wireless Controller to the latest version
• Impulse triggers, 3.5mm audio jack are not supported

1. Press the Xbox button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/ PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Bytton mapping (Xbox Controller)

Switch Pro Controller

• Please update your Switch Pro Controller to the latest version

1. With the controller off, press and hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

Wii U Pro

1. With the controller off, press and hold the Pair button to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

Ultimate Bluetooth Controller

• Please update your Ultimate Bluetooth Controller to the latest version

1. Turn the mode switch to Bluetooth
2. Press the home button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status
3. LED blinks rapidly (This is required for the very first time only)
4. Connect the PS receiver to the controller port of the PS1/PS2 console
5. Press the Pair button on the receiver, status LED starts to blink rapidly
6. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

Pro 2 Bluetooth Controller

• Please update your Pro 2 Bluetooth Controller to the latest version

1. Turn the mode switch to D
2. Press the Start button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/ PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

SN30 Pro+ Bluetooth Controller

• Please update your SN30 Pro+ Bluetooth Controller to the latest version

1. With the controller off, press and hold B + Start buttons to turn on the controller, then hold the Pair button forseconds to enter its pairing mode, the status LED rotates from left to right.(This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button of the PS receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

SN30 Pro Bluetooth Controller

• Please update your SN30 Pro Bluetooth Controller to the latest version

1. With the controller off, press and hold B + Start to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right. (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

SN30 Pro for Android

• Please update your SN30 Pro for Android to the latest version

1. Press the Xbox button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

Lite 2/Lite SE

• Please update your Lite 2/Lite SE to the latest version

1. Turn the mode switch to D
2. Press the home button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

Lite

• Please update the firmware of your Lite to the latest version

1. Turn the mode switch to X
2. Press the home button to turn on the controller, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED rotates from left to right (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

PS1 Mod Kit/PS1 Classic Mod Kit

• Please update your PS1 Mod Kit/PS1 Classic Mod Kit to the latest version

1. With the controller off, press X + start to turn on the controller, then hold the Select button for 3 seconds to enter its pairing mode, the status LED blinks rapidly (This is required for the very first time only)
2. Connect the receiver to the controller port of the PS1/PS2 console
3. Press the Pair button on the receiver, status LED starts to blink rapidly
4. LEDs will become solid when the connection is successful

Button mapping (Xbox Controller)

Arcade Stick

• Please update your Arcade Stick to the latest version

1. Turn the mode switch to X
2. Press the home button to turn on the Arcade Stick, then hold the Pair button for 3 seconds to enter its pairing mode, the status LED starts to rotate clockwise (This is required for the very first time only)
3. Connect the receiver to the controller port of the PS1/ PS2 console
4. Press the Pair button on the receiver, status LED starts to blink rapidly
5. LEDs will become solid when the connection is successful

S Mode Button mapping (Xbox Controller)

X Mode Button mapping (Xbox Controller)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>