OLIGHT Obounds Smart Wireless Multi Protocol Gateway User Manual

USER MANUAL
Obourds

A compact and intelligent wireless multi-protocol gateway that enables remote control of your Olight lighting devices.

IN THE BOX

Specification

Table1:

(The device is incompatible with 5 GHz Wi-Fi)

HOW TO CONNECT OBOUNDS TOOLIGHT HUB

ADOOBOUNDS TOOLIGHT HUB
Ater blue & green indicators light up for 10 seconds, the blue indicator will blink, Abounds getaway will enter network paring mode.

Figure 6

Reset gateway & Pairing mode
If unable to add devices, please reset the gateway and try again.

To reset the gateway, press and hold the “RESET” button for at least 5 seconds and then release it. Wait for 10 seconds until the blue indicator blinks, indicating that the gateway has been reset and has entered pairing mode.
In constant-pairing mode, green indicator blinks.
In this mode, Obrounds will automatically associate other sub devices that are under pairing mode.

ASSOCIATE BLUETOOTH SUBDEVICES TO OBOUNDS

Select Obrounds on Olight Hub home page and enter Obrounds control page.

Associate Bluetooth devices
Select the Bluetooth sub devices to be associated Sub devices associated

HOW T0 ADD NEW DEVICES TO 0BOUNDS?

Select obtunds on Olight home page and enter Obrounds control page A new devices.

1. Product specifications, see Table 1;

2. APP instructions as below:
   2.1 Install Olight Hub, see Figure 1;
   2.2 Connect your phone to Wi-Fi, turn on Bluetooth, then register for a Olight Hub account and log in. See Figure 2;
   2.3 Connect to power supply for the first time, see Figure 3;
   2.4 Connect Obrounds in Olight Hub and enter the Wi-Fi password, see Figure 4;
   2.5 Device added, see Figure 5;
   2.6 Pairing mode/Reset the gateway, see Figure 6;
   2.7 Constant-pairing mode, see Figure 7;

3. See following guidelines to associate bluetooth devices:
   3.1 Enter gateway control page, see Figure 8;
   3.2 Associate bluetooth devices, see Figure 9;
   3.3 Bluetooth devices added, see Figure 10;

4. See following instructions to add new devices:
   4.1 Add a new device, see Figure 11;
   4.2 New device added, see Figure 12;

Exclusion clause

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.
MEASURES : Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC (IC) Radiation Exposure Statement:

This equipment complies with FCC (IC) radiation exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure condition without restriction.
This Class B digital apparatus complies with Canadian ICES-003.Cet appareil underquote lactase Best conformed la norma NMB-003 Canada. C RF Statement: When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
WARNING

• Do not expose the product to fire, as it may result in unpredictable and dangerous consequences.

CAUTION

• Avoid dropping the product or subjecting it to impact from hard surfaces or other objects.
• Ensure that the product is not exposed te temperatures exceeding 60 degrees Celsius, as it may cause deformation or damage to the device.
• Do not disassemble or modify the product on your own.

NOTICE

• This device operates only on a 2.4 GHz Wi-Fi network, and is not compatible with 5 GHz Wi-Fi.
• When there is high-frequency usage or multiple devices controlling the product, it may experience delays or become unresponsive due to data congestion. If this happens, simply try operating the device again or refresh the page.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Warning

This device complies with Industry Canada’ s licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause interference, and
2.  this device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

WARRANTY

WITHIN 30 DAYS OF PURCHASE: Contact the original seller for repair or replacement.
WITHIN 2 YEARS OF PURCHASE: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.
USA Customer Support
cs@olightstore.com
Global Customer Support
contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.

CONTAINS FCC ID: 2ANDL-ZS3L / 2ANDL-WBRG1
IC: 28283-OBOUNDS
Made in China
3,4000.0650
B. 07, 27, 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>