SIEMENS 7SR224 Three Phase SDR Recloser User Manual
- June 10, 2024
- SIEMENS
Table of Contents
SIEMENS 7SR224 Three Phase SDR Recloser
Overview
Item | Description |
---|---|
A | MLFB model number |
B | Ratings label |
C | Programming port |
LED | Description |
L1 | Phase A target |
L2 | Phase B target |
L3 | Phase C target |
L4 | Ground fault target |
L5 | Sensitive earth fault (SEF) target |
L6 | Recloser is locked out |
L7 | AC input power to control cubicle ok |
L8 | Capacitors charged and system ready to reclose |
LED | Button |
status:
---|---|---|---
L9| F1| Push-to-open recloser| Recloser is OPEN
L10| F2| Push-to-close recloser| Recloser is CLOSED
L11| F3| Push-to-toggle reclose functionality ON/OFF| Reclose functionality is
ON
L12| F4| Push-to-toggle hot line tag ON/OFF| Hotline tag is ON
L13| F5| Push-to-toggle ground fault protection ON/OFF| Ground fault
protection is OFF
L14| F6| Push-to-toggle SEF protection ON/OFF| SEF protection is OFF
L15| F7| Push-to-toggle all protection ON/OFF| All protection is OFF
L16| F8| Push-to-toggle instantaneous protection ON/OFF| Instantaneous
protection is OFF
L17| F9| User-defined| User-defined
L18| F10| User-defined| User-defined
L19| F11| User-defined| User-defined
L20| F12| Push-to-trip and reclose recloser| —-
LED| Button| Description| If the associated LED is lit, the
status:**
---|---|---|---
L9| F1| Push-to-open recloser| Recloser is OPEN
L10| F2| Push-to-close recloser| Recloser is CLOSED
L11| F3| Push-to-toggle reclose functionality ON/OFF| Reclose functionality is
ON
L12| F4| Push-to-toggle hot line tag ON/OFF| Hot line tag is ON
L13| F5| Push-to-toggle ground fault protection ON/OFF| Ground fault
protection is OFF
L14| F6| Push-to-toggle SEF protection ON/OFF| SEF protection is OFF
L15| F7| Push-to-toggle all protection ON/OFF| All protection is OFF
L16| F8| Push-to-toggle instantaneous protection ON/OFF| Instantaneous
protection is OFF
L17| F9| User-defined| User-defined
L18| F10| User-defined| User-defined
L19| F11| User-defined| User-defined
L20| F12| Push-to-trip and reclose recloser| —-
Quick reference navigation tree guide for type 7SR relay
If LCD screen does not say “ENTER to CONTROL”, press the Cancel button until it does. This will not cause the recloser to operate.
Press enter.
Settings mode detailed tree
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>