Jinhongxiang P959l Multifunctional Wireless Stereo Headphones User Manual
- July 12, 2024
- Jinhongxiang
Table of Contents
Jinhongxiang P959l Multifunctional Wireless Stereo Headphones
Parameter
| Model | P959 | Type | Headset |
|---|---|---|---|
| Wireless | V5.3+EDR | Protocol | A2DP,AVRCP,HSP,HFP |
| Frequency Range | 2.4-2.4835G | TX power | CLASS B |
| CVCTMOOP | Support | Effective | 10 Meter |
| Micro SD/TF | Support | Frequency | 87-109 MHz |
| Loudspeaker Material | NsfeB | Max support | 32G |
| Sensitivity | 105 ±3dB | Specification | 40mm |
| Bantul Power | 30mW | Desertion | 1%AtlKHz |
| Resistance | 320 | Frequency | 20-20KHz |
| Microphone | Support | Recognition | Capacitance |
| Sensitivity | -58±3dB | Frequency | 30-161< Hz |
| Play time | > 10 hours | Recognition | Capacitance |
| Standby time | > 180 hours | Charge port | USB |
| Standby current | 0.5-0.6mA | Charge Time | 2-3 hours |
| Battery type | Lithium battery | Charge Time | 1 A |
| BCJ1tery capacity | 350mAh | Charge voltage | 5V |
Buttons, Interfaces, Switches
| Long press to turn on/off the headphone Short press to switch mode| Switch
between function keys Press twice to dial to make a call, and pass once to
hang up
---|---|---
| Rotation: Increase and decrease volume
Click: Pause/ Play music
Double click next /Triple hit previous
| TF card slot| Insert TF card, play card stored MP3 song files.
l/0
| Audio 1/0 interface| External audio input ear airport speakers, Headphone audio output to external speakers.
USB
| Charging| Connect the charger to use charging
Use tutorial
Press the indicator light – Wireless mode (blue light) flashing, TF card mode (blue light) flashing, off state charging (red light) steady on.
Wireless
Switch, press and hold the headset will activate.
The indicator blinks blue. The Wireless function of the headset has been
enabled and is waiting for the connection status. At this time, the Wireless
headset is in the searchable state.
Click Wireless Settings in the phone Settings and select “On” to complete.
This turns on the phone’s Wireless function.
Open the Wireless option on the phone to search, successfully search for the
Wireless waiting for pairing, the list of available devices shows
, click
to connect, at this time, the
blue light on the headset is steady on, indicating that the connection has
been successful. 3.2.TF card
TF card playback
Insert TF into the headphone card slot and the blue light flashes when
playing.
The system automatically decodes the playable audio format file, at which time
your favorite melodious song gently sounds.
Connect/hang up
To answer a call, press and hold for 2 seconds to reject the call.
Charge
Before charging, turn off the earphone power and connect the earphone to the computer USB with the charging cable. At this time, the earphone indicator is red and the earphone is charging. System built-in battery capacity detection and overload protection. There is no need to worry about the impact of a long charging time on the battery. The indicator lights out automatically, indicating that the charging is complete.
Low power – low power will automatically shut down, please charge as soon as possible, so as to meet the needs of the Bluetooth system.
Note: Do not turn on the earphone power during the charging process, otherwise the battery life of the earphone hardware will be damaged.
Precautions
- This headset is not waterproof, please pay attention to waterproof and moisture-proof, to ensure that the system can be used normally.
- It supports computer USB interface charging, do not change or connect it to other external power supply charging.
- The headset can not be placed for a long time, please charge and discharge once a week to extend the battery life.
- When the recording line is connected to the mobile phone to listen to music, please turn off the power to avoid noise.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>