UGREEN PB172 Power Bank 10000mah Lightning Cable User Manual
- June 5, 2024
- UGREEN
Table of Contents
UGREEN PB172 Power Bank 10000mah Lightning Cable
Product Details
- Lightning Charging Cable
- Battery Indicator
- USB-A Output Port
- USB-C Port
- Power Button
Instructions
-
Power On
Short press the button. -
Power Off
-
If no device is connected to this product within 30 seconds, it will automatically turn off.
-
Press and hold the button for around 3 seconds to turn it off.
-
LED Indicator Light Status
A quick press on the button shows the current battery capacity. The LED indicators turn off automatically after 30 seconds. -
Charging product
-
Connect product to the power adapter for charging.
-
Each light represents 25% of battery capacity. Indicators turn from blinking into staying on while fully charged.
-
Please use the power adapter that complies with the input standard of this unit.
-
Discharging product
-
A. Charge iPhone or iPad Connect your iPhone or iPad to this product via the built-in lightning cable.
-
B. Charge digital devices (e.g., smartphones and tablets) Connect the USB charging cable to digital devices for charging.
Note: Short press the button twice while there is no charging sign. -
C. Support fast charge Both of the charging ports and the lightning cable of this product support fast charge protocol. It complies with the mainstream fast charge devices.
Note: -
This product will turn off the fast charge function and only support the ordinary 5V output when two devices are connected simultaneously.
-
When the device and the product are eligible for the same fast charge protocol, the fast charge function can be activated. Otherwise the product only supports SV output.
-
D. LED state of discharge The four power indicators turn off one by one during discharging. While the left one blinking,. the battery capacity is lower than 10%.
-